XFBBD(8) System Manager's Manual XFBBD(8)NAME
xfbbd - Daemon for the fbb mailbox
SYNOPSIS
xfbbd [options]
OPTIONS -v Verbose option. Prints errors, warnings and messages.
-p <port>
TCP/IP port for the console client. Default is 3286.
-a Decode all packets when receiving data on a socket. Normally only AX.25 data (NET/ROM and Rose) will be monitored.
-i Init mode. Only initialize, don't run. Use this to parse your configuration files without actually starting the daemon.
-n Don't start communication socket for the console.
AUTHOR
This manual page was written by Joop Stakenborg <pa3aba@debian.org>.
XFBBD(8)
Check Out this Related Man Page
NETROM(4) Linux Programmer's Manual NETROM(4)NAME
AF_NETROM - NET/ROM amateur packet radio protocol family
DESCRIPTION
NET/ROM is a protocol used extensively by radio amateurs. The Linux NET/ROM protocol family permits access to these protocols via the stan-
dard networking socket metaphor.
The NET/ROM protocol layer only supports connected mode. IP traffic may be stacked on top of NET/ROM frames using a non-standard extension
to the NET/ROM protocol.
The only mode of operation is connected mode which is the mode used for a socket of type SOCK_SEQPACKET (stream sockets are not available
in NET/ROM). This requires that the user ensures output data is suitably packetised, and that input data is read a packet at a time into a
buffer of suitable size.
NET/ROM addresses consist of 6 ascii characters and a number called the SSID. These are encoded into a sockaddr_ax25 structure which is
provided to the relevant system calls.
NET/ROM has some unusual properties. Notably in a multi-user system an AX.25 address is often associated with a user, and some users may
not have such an association. a set of ioctl calls are provided to manage an association table.
NET/ROM supports the following socket options for SOL_NETROM. NETROM_T1 is the T1 timer in 1/10ths of a second, NETROM_T2 is the T2 timer
in 1/10ths of a second. NETROM_N2, the retry counter is also configurable. There is no 'infinite retry' option supported however. It is
possible for an application to request that the NET/ROM layer return the NET/ROM header as well as the application data, this is done via
the NETROM_HDRINCL socket option.
SEE ALSO call(1), socket(2), setsockopt(2), getsockopt(2), nrbroadcast(5), nrports(5), netromd(8), noderest(8), nodesave(8), nrparms(8).
AUTHOR
Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk>
Linux 25 July 1996 NETROM(4)
I have a huge matrix file containing some 1.5 million rows and 6000 columns. The matrix looks something like this:
1 2 3
4 5 6
7 8 9
3 4 5
I want to add all the numbers in the columns of this matrix and display the result to my stdout. This means that the numbers in the first column are:
... (2 Replies)
Hi,
Just trying to get to grips with sed and awk for some reporting for work and I need some assistance:
I have a file that lists policy names on the first line and then on the second line whether the policy is active or not.
Policy Name: Policy1
Active: yes
Policy... (8 Replies)
version info :
vi availabe with RHEL 5.4
I have a text file with 10,000 lines. I want to copy lines from 5000th line to 7000th and redirect to a file. Any idea how I can do this?
Note:
The above scenario is just an example. In my actual requirement, the file has 14 million lines and I want... (9 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello,
I couldn't find an actual introduction thread, so I decided to just put this here.
I go by d0wngrade online. I have been programming in multiple languages for about 15+ years. I started with standard web design languages like HTML and CSS, but I then advanced from design to development... (2 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Hi.
In thread https://www.unix.com/shell-programming-and-scripting/267833-grouping-counting.html rovf and I had a mini-discussion on grep and awk.
Here is a demo script that compares the awk and grep approaches for this single problem:
#!/usr/bin/env bash
# @(#) s2 Demonstrate group... (1 Reply)
Hello,
I have to fish out some specific columns from a file based on the header value. I have the list of columns I need in a different file. I thought I could read in the list of headers I need,
# file with header names of required columns in required order
headers_file=$2
# read contents... (11 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
I have data of an excel files as given below,
file1
org1_1 1 1 2.5 100
org1_2 1 2 5.5 98
org1_3 1 3 7.2 88
file2
org2_1 1 1 2.5 100
org2_2 1 2 5.5 56
org2_3 1 3 7.2 70
I have multiple excel files as above shown.
I have to copy column 1, column 4 and paste into a new excel file as... (26 Replies)
Dear All,
Taking a break from Vue.js coding for the site, SEO and YT videos; and hopefully addressing some well deserved criticism from some here that I have been too focused on the visual aspects of the forums versus the substance and the community....
While the "current generation... (9 Replies)
Hi all...
Well guys and gals, I jumped in at the deep end and found things that PERL cannot do by default.
Many tricky terminal escape codes are not catered for so I had to create workarounds.
One thing I searched for was this:
Passing perl variable to shell command
AND, @Neo this was... (15 Replies)