debian man page for swift-ring-builder

swift-ring-builder(8)					      System Manager's Manual					     swift-ring-builder(8)

NAME
       swift-ring-builder - Manipulate the swift ring storage devices.

SYNOPSIS
       swift-ring-builder <builder_file> [ACTION] [parameters]

DESCRIPTION
       swift-ring-builder

       Manipulate the swift ring. Please contribute a better long description!

PARAMETERS
       The parameter [ACTION] can take one of the following values:

       create search add set_weight set_info remove rebalance validate write_ring set_min_part_hours

       If  action  is  not specified, then swift-ring-builder will display all the storage devices. Below is a full description of each individual
       actions.  In each individual action, you may specify a <search-value>. In that case, then <search-value> can be of the form:

       d<device_id>z<zone>-<ip>:<port>/<device_name>_<meta>

       Any part is optional, but you must include at least one part. Examples:

       d74 Matches the device id 74

       z1 Matches devices in zone 1

       z1-1.2.3.4 Matches devices in zone 1 with the ip 1.2.3.4

       1.2.3.4 Matches devices in any zone with the ip 1.2.3.4

       z1:5678 Matches devices in zone 1 using port 5678

       :5678 Matches devices that use port 5678

       /sdb1 Matches devices with the device name sdb1

       _shiny Matches devices with shiny in the meta data

       _"snet: 5.6.7.8" Matches devices with snet: 5.6.7.8 in the meta data

       Most specific example: d74z1-1.2.3.4:5678/sdb1_"snet: 5.6.7.8"

       Nerd explanation: All items require their single character prefix except the ip, in which case the - is optional unless the  device  id	or
       zone is also included.

CREATE
       swift-ring-builder <builder_file> create <part_power> <replicas> <min_part_hours>

       Creates	<builder_file>	with 2^<part_power> partitions and <replicas>.	<min_part_hours> is number of hours to restrict moving a partition
       more than once.

SHOW
       swift-ring-builder <builder_file>

       Shows information about the ring and the devices within.

SEARCH
       swift-ring-builder <builder_file> search <search-value>

       Shows information about matching devices.

ADD
       swift-ring-builder <builder_file> add z<zone>-<ip>:<port>/<device_name>_<meta> <weight>

       Adds a device to the ring with the given information. No partitions will be assigned to the new device  until  after  running  'rebalance'.
       This is so you can make multiple device changes and rebalance them all just once.

SET WEIGHT
       swift-ring-builder <builder_file> set_weight <search-value> <weight>

       Resets the device's weight. No partitions will be reassigned to or from the device until after running 'rebalance'. This is so you can make
       multiple device changes and rebalance them all just once.

SET INFO
       swift-ring-builder <builder_file> set_info <search-value> <ip>:<port>/<device_name>_<meta>

       Resets the device's information. This information isn't used to assign partitions, so you can use 'write_ring'  afterward  to  rewrite  the
       current ring with the newer device information. Any of the parts are optional in the final <ip>:<port>/<device_name>_<meta> parameter; just
       give what you want to change.  For instance set_info d74 _"snet: 5.6.7.8" would just update the meta data for device id 74.

REMOVE
       swift-ring-builder <builder_file> remove <search-value>

       Removes the device(s) from the ring. This should normally just be used for a device that has failed. For a device you wish to decommission,
       it's  best  to  set its weight to 0, wait for it to drain all its data, then use this remove command. This will not take effect until after
       running 'rebalance'. This is so you can make multiple device changes and rebalance them all just once.

REBALANCE
       swift-ring-builder <builder_file> rebalance

       Attempts to rebalance the ring by reassigning partitions that haven't been recently reassigned.

VALIDATE
       swift-ring-builder <builder_file> validate

       Just runs the validation routines on the ring.

WRITE RING
       swift-ring-builder <builder_file> write_ring

       Just rewrites the distributable ring file. This is done automatically after a successful rebalance, so really this is only useful after one
       or more set_info calls when no rebalance is needed but you want to send out the new device information.

SET MIN PART HOURS
       swift-ring-builder <builder_file> set_min_part_hours <hours>

       Changes	the <min_part_hours> to the given <hours>. This should be set to however long a full replication/update cycle takes. We're working
       on a way to determine this more easily than scanning logs.

															     swift-ring-builder(8)