STUND(8)STUND(8)NAME
stund - STUN protocol (Simple Traversal of UDP through NATs) Server
SYNTAX
stund [-v] [-h IP Address] [-a Secondary IP Address ] [-p port ] [-o port ] [-b ] [-m ]
STUN servers needs two IP addresses and two ports
DESCRIPTION
STUN Servers are used to help clients behind NAT to tunnel incoming calls through. This server is the counterpart to help the client iden-
tify the NAT and have it open the proper ports for it
OPTIONS -v Verbose output.
-h <IP Address>
Define the Main IP Address.
-a <IP Address>
Define the Second IP Address.
-p <Port>
Set the primary port the default port value is 3478
-o <Port>
Set the secondary port the default port value is 3479 -b Detach the process and makes the program run at the background
-m <Port>
Sets a starting port for the STERM server
--help Prints useful help
EXAMPLES
If the IP addresses of your NIC are 10.0.1.150 and 10.0.1.151 the proper and default use would be:
stund -h 10.0.1.150 -a 10.0.1.151
add -b option to detach the process
stund -h 10.0.1.150 -a 10.0.1.151 -b
AUTHORS
This manual page was written by Rene Mayorga <rmayorga@debian.org.sv> for the Debian system (but may be used by others). Permis-
sion is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later
version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
SEE ALSO stun(1)Debian Project 2007 Aug 31 STUND(8)
Check Out this Related Man Page
LIBIEC61883(1)LIBIEC61883(1)NAME
plugctl - a program to get or set any MPR or PCR register value
SYNOPSIS
plugctl [-p port] [-n node] plug.attribute[=value]
DESCRIPTION
plugctl is a program to get or set the value of a plug's attribute.
plug is one of oMPR, iMPR, oPCR[n], or iPCR[n] (case insensitive). Please supply a numerical index for [n].
This manual page was written for the Debian distribution because the original program does not have a manual page.
OPTIONS
These programs follow the usual GNU command line syntax. A summary of options is included below.
-p port
Get or set the value of a plug's attribute into this port.
-n node
Get or set the value of a plug's attribute into this node.
SEE ALSO
plugreport (1)
AUTHOR
This manual page was written by Marcio Roberto Teixeira <marciotex@gmail.com> for the Debian system (but may be used by others). Permission
is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version
published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
AUTHOR
Marcio Teixeira.
april 15, 2006 LIBIEC61883(1)
Does anyone know how to get the IP Address of the connecting client to apear in the MOTD I am new to linux and I was wondering if this was possible thanks in advance. :D :confused: :D (4 Replies)
Dears,
I have server has two port's(Enet0,Enet1) what I want as follows:
Make the two port's has same IP address
where, if the port Enet0 became down automaticly Enet1 become up :confused: .
Amen (4 Replies)
We are running Solaris 9 and I have changed the IP address, Subnet Mask & Broadcast Address using ifconfig and have also changed the default gateway.
How do I save these changes as I have bounced the box and it reverted back to the old IP Address settings.
I am really new to UNIX and we... (4 Replies)
Hi all,
I have a process with PID as 12456. Could you please let me know how do i find out what is the port that process listens upon in Linux?
Thanks in Advance,
Pankajakshan (2 Replies)
I have a file with the following:
87565
82155
102656
151
162
I want to write korn shell script that will read each line in a loop and remove any number that has less than 5 digits, e.g., 151 and 152.
thank you,
Keoki:confused: (4 Replies)
After allocating memory for some variables, segfault is often to happen, due to the same reason: Address 0x1cd00000103 out of bounds
It is welcome to recommend some treatments. Thanks
e.g.
is_done = 0x1cd00000103 <Address 0x1cd00000103 out of bounds>,
hood = 0x23c00000247,
c =... (11 Replies)
Hey guys
I am into strange problem where I have to integrate cluster and EMC storage for that I have to take 1 NIC port from default nic port present on the server and 3 NIC port from quad card which is also present on the server. Right now I have connect all ports to a network for testing... (6 Replies)
Hey Guys,
I need a help,
After I upgraded my server to AIX 6.1.4 the port 80 is occupied by a Java process
bash-3.00# netstat -Aan | grep "*.80"
f1000700007d7bb0 tcp 0 0 *.80 *.* LISTEN
bash-3.00# rmsock f1000700007d7bb0 tcp
usage: rmsock Addr... (2 Replies)
Hi All.
We are using AIX 5.3 ML9. There is 1 Gig NIC installed on two servers (Primary and Secondary) with Full Duplex Mode. We have scheduled a cronjob to copy the backup from primary to secondary thru FTP on WAN. The total data size is 15 GB and it took 9 Hours and 18 Mins with transfer rate... (6 Replies)
Hi all,
I was abit confused where to put this problem, since its only relevant to OI and therefore I put it here.
For the past weeks I was building my own NAS based on OI 151 a7. Everything was sweet, until I bumped into one horrific issue which cause the link between my NAS to my PC... (10 Replies)
Hello Everyone,
We now (only) permit access to our RSS news feed access based on IP address. This means that if you have a website or application that using our site RSS feeds, you can still do it; but your must register you site in this thread.
So please reply with your IP address of your... (9 Replies)
Hello
I have a requirement where I need to replace space :61 with !@ :61
Source
:60F:123 :61:151 :61:151 :61:15101
Target
:60F:123 :61:151!@:61:151!@:61:15101
I cant use and command as I don't want the tab to be converted .
commands not working :
sed 's/... (5 Replies)