PPPOE-START(8) System Manager's Manual PPPOE-START(8)NAME
pppoe-start - Shell script to bring up a PPPoE link
SYNOPSIS
pppoe-start [config_file]
pppoe-start interface user [config_file]
DESCRIPTION
pppoe-start is a shell script which starts the Roaring Penguin user-space PPPoE client. If you omit config_file, the default file
/etc/ppp/pppoe.conf is used. If you supply interface and user, then they override the Ethernet interface and user-name settings in the
configuration file.
AUTHOR
pppoe-start was written by David F. Skoll <dfs@roaringpenguin.com>.
The pppoe home page is http://www.roaringpenguin.com/pppoe/.
SEE ALSO pppoe(8), pppoe-stop(8), pppoe-connect(8), pppd(8), pppoe.conf(5), pppoe-setup(8), pppoe-status(8), pppoe-sniff(8), pppoe-relay(8), pppoe-
server(8)4th Berkeley Distribution 21 February 2000 PPPOE-START(8)
I would appreciate any help anyone could give.
I am having DNS problems...
Here are the facts:
linux: 2.2.16
Distrib: SUSE 7.0
pppd: rp-pppoe
ISP: Verizon Avenue
IP: Dynamic
DNS: 10.5.0.65 ???
Default Gateway: 10.5.0.65 ????
I have tried putting the above IP into /etc/resolv.conf with... (3 Replies)
Hi everyone,
This is basically my problem. I setup freebsd, and wanted to get my adsl connection up which uses pppoe to connect. I followed the steps in this (http://free.mine.nu/~squirrel/PPPoE/FreeBSD%20PPPoE%20Howto.htm) manual and configured everything successfully. The problem begins when i... (7 Replies)
I am trying to set up a linux box as a router, but I am a little confused
on how to do this. I am using Red Hat 9.0 on a machine that has 2
nic cards. Also, I am using a DSL pppoe connection. I have installed
rp-pppoe and I am connected to the internet via the pseudo pppoe
interface. I have... (1 Reply)
Hi,
I have to always select last portion of a block identified by 2 fixed keywords
which repeats in a file for eg
START
....
...
END
START
....
...
END
START
....
...
END (9 Replies)
Hi ALL:
I need to write a script that will start bunch of servers. and these servers each has a sudo account and they need a passowrd.
I dont know where to start and look.
Can you please give me some hints or some sample code.
Thanks in advance.
splax (4 Replies)
hi
i have kind of below text in a file.
I want to get a complete paragraph starting with START and ending with before another START) which has a particular string say XYZ or ABC
START XYZ hshjghkjh 45 ljkfd
fldjlj d jldf
START 3493u ABC 454
4545454
4545454 45454
4545454
START ...... (3 Replies)
Hi all,
I decided to replace my linux router/firewall with Solaris 11 express. This is a pppoe connection directly to my server...no router boxes. I got everything setup, but the performance is terrible on the NAT....really slow. A web page that loads on the server instantly will take... (3 Replies)
when i used to run this command
A2=`cat temp |awk -F "," '{print $7}' | awk -F ";" '{print $1}'`
give the requited O/P
but when i use this command in script its taking only
is there any problem in using this command in script or spaces are not readable in script (2 Replies)
I have a file with the following contents.
DTP
START
START
START
DTP
START
DTP
START
DTP
START
I like to join the lines like this
DTP START
START
START
DTP START
DTP START (2 Replies)
Hi,
I need shell script for getting the date in format from below text output
IP IS 10.238.52.65
pun-ras-bng-mhs-01#show conf port 2/4
Building configuration...
Current configuration:
!
card ge3-4-port 2
!
port ethernet 2/4
no shutdown
encapsulation dot1q (7 Replies)
Hi, I use ubuntu 16.04 desktop with ufw (default setup + 22, 80, 443 ports open).
I connect directly to ISP using pppoe over eth0. I also have eth1 which when disabled the websites are accessible in browser. When starting eth1 with auto dhcp the websites are no longer accessible in browser (give... (3 Replies)
I have a shell script which takes user name and server name from the user and check the authentication type on that server like LDAP or VAS or local. It also provides various other info also such as owner of the ID and etc.
I need this script to work on the browser where user can directly input... (2 Replies)
Hi,
I need to create a shell script for automated server patching, with the following scenario:
I have two Linux servers Primary and secondary.
Server patching should start on Primary 1st and then secondary.
1st check both servers are up and running.
Then stop primary and patching will... (1 Reply)