PAM_ISSUE(8) Linux-PAM Manual PAM_ISSUE(8)NAME
pam_issue - PAM module to add issue file to user prompt
SYNOPSIS
pam_issue.so [noesc] [issue=issue-file-name]
DESCRIPTION
pam_issue is a PAM module to prepend an issue file to the username prompt. It also by default parses escape codes in the issue file similar
to some common getty's (using x format).
Recognized escapes:
d
current day
l
name of this tty
m
machine architecture (uname -m)
machine's network node hostname (uname -n)
o
domain name of this system
release number of operating system (uname -r)
current time
s
operating system name (uname -s)
u
number of users currently logged in
U
same as u except it is suffixed with "user" or "users" (eg. "1 user" or "10 users")
v
operating system version and build date (uname -v)
OPTIONS
noesc
Turns off escape code parsing.
issue=issue-file-name
The file to output if not using the default.
MODULE TYPES PROVIDED
Only the auth module type is provided.
RETURN VALUES
PAM_BUF_ERR
Memory buffer error.
PAM_IGNORE
The prompt was already changed.
PAM_SERVICE_ERR
A service module error occurred.
PAM_SUCCESS
The new prompt was set successfully.
EXAMPLES
Add the following line to /etc/pam.d/login to set the user specific issue at login:
auth optional pam_issue.so issue=/etc/issue
SEE ALSO pam.conf(5), pam.d(5), pam(7)AUTHOR
pam_issue was written by Ben Collins <bcollins@debian.org>.
Linux-PAM Manual 06/04/2011 PAM_ISSUE(8)
Check Out this Related Man Page
PAM_ISSUE(8) Linux-PAM Manual PAM_ISSUE(8)NAME
pam_issue - PAM module to add issue file to user prompt
SYNOPSIS
pam_issue.so [noesc] [issue=issue-file-name]
DESCRIPTION
pam_issue is a PAM module to prepend an issue file to the username prompt. It also by default parses escape codes in the issue file similar
to some common getty's (using x format).
Recognized escapes:
d
current day
l
name of this tty
m
machine architecture (uname -m)
machine's network node hostname (uname -n)
o
domain name of this system
release number of operating system (uname -r)
current time
s
operating system name (uname -s)
u
number of users currently logged in
U
same as u except it is suffixed with "user" or "users" (eg. "1 user" or "10 users")
v
operating system version and build date (uname -v)
OPTIONS
noesc
Turns off escape code parsing.
issue=issue-file-name
The file to output if not using the default.
MODULE TYPES PROVIDED
Only the auth module type is provided.
RETURN VALUES
PAM_BUF_ERR
Memory buffer error.
PAM_IGNORE
The prompt was already changed.
PAM_SERVICE_ERR
A service module error occurred.
PAM_SUCCESS
The new prompt was set successfully.
EXAMPLES
Add the following line to /etc/pam.d/login to set the user specific issue at login:
auth optional pam_issue.so issue=/etc/issue
SEE ALSO pam.conf(5), pam.d(5), pam(8)AUTHOR
pam_issue was written by Ben Collins <bcollins@debian.org>.
Linux-PAM Manual 04/01/2010 PAM_ISSUE(8)
Hello everybody,
Look, im having problems with connections from other server, i must recieve maximus 5 connections from the other server, when I run 'netstat -A | grep <THE_OTHER_SERVER_IP>' I can see how many connections I have already established, but when they open another connection, i mean... (8 Replies)
I have a user defined configuration file, which could contain the following type of entries:
directory_001=/a/directory/structure
pattern_001=fred*
pattern_002=*
I have a script which reads the file generically which will loop round
loop 1
genvar=”directory”
iteration=”001”
... (11 Replies)
Hi,
I have a shell scripting. This will take 7 digit number in each line and add 7 digit number with next subsequent lines ( normal addition ).
Eg:
0000001
0000220
0001235
0000022
0000023
...........
.........
........
Like this i am having around 1500000 records. After adding... (23 Replies)
Hello, have HP Visualize C3600 workstation. Issue is as follows:
When I attempt to boot, unit will not boot successfully and will halt at a menu, the same menu as when during a boot one hits any key within 10 seconds to discontinue. When I attempt to boot with Boot primary, both with IPL... (17 Replies)
Hi ,
I need a clarification on an issue that we have been facing for two weeks now.
From past one year we had issue with space on our Linux machine on which our application ( View VC, CVS) hosted on it. Due to swap memeory configuration being 0 and very less space on the server, the server... (7 Replies)
Hi,
I have a strange issue in my script.
When script is run from command prompt it runs fine,but when run from cron it exist with error message.
I narrowed down the issue and found that " use Mail::Sender;" is the culprit.
If I comment the statment the code runs fine in both command and... (9 Replies)
We have a Solaris 10 machine.
Today a weird issue happened.
After login remotely via ssh, the motd appeared BUT
there was no prompt!
The prompt only appears after pressing Ctrl+d or Ctrl+c.
Strange behaviour.
I have checked /etc/profile and own user .profile, there is no anamoly.
... (11 Replies)
Hey,
I am getting the following error when I try to run a particular binary.
fatal: libmathpack.SunOS.so.1: open failed: No such file or directory
I have tried searching the Sun forums as well as google for any pointers towards what I might be missing.
Anyone seen this before ?
Thanks a... (7 Replies)
Hi,
Im trying to create a command template here. how can i issue this long command in one enter?
echo -e "\nIssue or Request - Analysis Summary \n\nMemory Utilization Utilization Threshold\n\nResolution Summary\n\n1. check Server Info";echo "$(uname -a;uptime;date)"; echo -e "\n\n2. check... (9 Replies)
Hello Gentlemen,
Its been a looong time I have posted here. I need a clarification. We started up the OPMN service (for Oracle App server) on Linux box. The service was supposed to listen on port 6005.
The service started up and was listening to 6005 but looks like it was listening only to... (7 Replies)
Hello People,
I have an outstanding issue with me
I have 5 files at location /usr/abc called
1.DE 1.TXT
2.DE 2.TXT
3.DE 3.TXT
4.DE 4.TXT
5.Fe.ok
My work involves few manual process like
transfer
1.DE 1.TXT and
5.Fe.ok to
/usr/dob location and run one script(for example -... (42 Replies)
Use and complete the template provided. The entire template must be completed. If you don't, your post may be deleted!
1. The problem statement, all variables and given/known data:
Hi there,
I wish to create a single .tar file of the current directory but have literally no idea on where to... (8 Replies)
Hi, again.
Now before you think I just ask here as soon as I have an issue... I did try to resolve this myself (reassembled the drive, cleaned the laser)
My latest issue with my Sun Ultra Enterprise 450, Is that when I try to boot from the CD {0} ok boot cdrom -s I get this:
Boot device:... (8 Replies)
Hello,
I have encountered the issue on my AIX 6.1. As you can see below, the hdisk1 & hdisk8 are not recognized by the system
/ > lspv
hdisk0 00fa6d1288c820aa rootvg active
hdisk1 00fa6d1288c8213c None
hdisk2 ... (9 Replies)