MKEXFATFS(8) System Manager's Manual MKEXFATFS(8)NAME
mkexfatfs - create an exFAT file system
SYNOPSIS
mkexfatfs [ -i volume-id ] [ -n volume-name ] [ -p partition-first-sector ] [ -s sectors-per-cluster ] [ -v ] device
DESCRIPTION
mkexfatfs creates an exFAT file system on a block device. device is a special file corresponding to the device.
OPTIONS
Command line options available:
-i volume-id
A 32-bit hexadecimal number. By default a value based on current time is set.
-n volume-name
Volume name (label), up to 15 characters. By default no label is set.
-p partition-first-sector
First sector of the partition starting from the beginning of the whole disk. exFAT super block has a field for this value but in
fact it's optional and does not affect anything. Default is 0.
-s sectors-per-cluster
Number of physical sectors per cluster (cluster is an allocation unit in exFAT). Must be a power of 2, i.e. 1, 2, 4, 8, etc. Cluster
size can not exceed 32 MB. Default cluster sizes are: 4 KB if volume size is less than 256 MB, 32 KB if volume size is from 256 MB
to 32 GB, 128 KB if volume size is 32 GB or larger.
-v Print version and copyright.
EXIT CODES
Zero is returned on successful creation. Any other code means an error.
AUTHOR
Andrew Nayenko
SEE ALSO mkfs(8)
January 2011 MKEXFATFS(8)
Check Out this Related Man Page
MKDOSFS(8) System Manager's Manual MKDOSFS(8)NAME
mkdosfs - create an MS-DOS file system under Linux
SYNOPSIS
mkdosfs [ -A ] [ -b sector-of-backup ] [ -c ] [ -l filename ] [ -C ] [ -f number-of-FATs ] [ -F FAT-size ] [ -i volume-id ] [ -I ] [ -m
message-file ] [ -n volume-name ] [ -r root-dir-entries ] [ -R number-of-reserved-sectors ] [ -s sectors-per-cluster ] [ -S logical-sector-
size ] [ -v ] device [ block-count ]
DESCRIPTION
mkdosfs is used to create an MS-DOS file system under Linux on a device (usually a disk partition). device is the special file correspond-
ing to the device (e.g /dev/hdXX). block-count is the number of blocks on the device. If omitted, mkdosfs automatically determiness the
file system size.
OPTIONS -A Use Atari variation of the MS-DOS filesystem. This is default if mkdosfs is run on an Atari, then this option turns off Atari for-
mat. There are some differences when using Atari format: If not directed otherwise by the user, mkdosfs will always use 2 sectors
per cluster, since GEMDOS doesn't like other values very much. It will also obey the maximum number of sectors GEMDOS can handle.
Larger filesystems are managed by raising the logical sector size. Under Atari format, an Atari-compatible serial number for the
filesystem is generated, and a 12 bit FAT is used only for filesystems that have one of the usual floppy sizes (720k, 1.2M, 1.44M,
2.88M), a 16 bit FAT otherwise. This can be overridden with the -F option. Some PC-specific boot sector fields aren't written, and a
boot message (option -m) is ignored.
-b sector-of-backup
Selects the location of the backup boot sector for FAT32. Default depends on number of reserved sectors, but usually is sector 6.
The backup must be within the range of reserved sectors.
-c Check the device for bad blocks before creating the file system.
-C Create the file given as device on the command line, and write the to-be-created file system to it. This can be used to create the
new file system in a file instead of on a real device, and to avoid using dd in advance to create a file of appropriate size. With
this option, the block-count must be given, because otherwise the intended size of the file system wouldn't be known. The file cre-
ated is a sparse file, which actually only contains the meta-data areas (boot sector, FATs, and root directory). The data portions
won't be stored on the disk, but the file nevertheless will have the correct size. The resulting file can be copied later to a
floppy disk or other device, or mounted through a loop device.
-f number-of-FATs
Specify the number of file allocation tables in the file system. The default is 2. Currently the Linux MS-DOS file system does not
support more than 2 FATs.
-F FAT-size
Specifies the type of file allocation tables used (12, 16 or 32 bit). If nothing is specified, mkdosfs will automatically select
between 12 and 16 bit, whatever fits better for the filesystem size. 32 bit FAT (FAT32 format) must (still) be selected explicitly
if you want it.
-i volume-id
Sets the volume ID of the newly created filesystem; volume-id is a 32-bit hexadecimal number (for example, 2e24ec82). The default
is a number which depends on the filesystem creation time.
-I Normally you are not allowed to use any 'full' fixed disk devices. mkdosfs will complain and tell you that it refuses to work.
This is different when usind MO disks. One doesn't always need partitions on MO disks. The filesytem can go directly to the whole
disk. Under other OSes this is known as the 'superfloppy' format.
This switch will force mkdosfs to work properly.
-l filename
Read the bad blocks list from filename.
-m message-file
Sets the message the user receives on attempts to boot this filesystem without having properly installed an operating system. The
message file must not exceed 418 bytes once line feeds have been converted to carriage return-line feed combinations, and tabs have
been expanded. If the filename is a hyphen (-), the text is taken from standard input.
-n volume-name
Sets the volume name (label) of the filesystem. The volume name can be up to 11 characters long. The default is no label.
-r root-dir-entries
Select the number of entries available in the root directory. The default is 112 or 224 for floppies and 512 for hard disks.
-R number-of-reserved-sectors
Select the number of reserved sectos. With FAT32 format at least 2 reserved sectors are needed, the default is 32. Otherwise the
default is 1 (only the boot sector).
-s sectors-per-cluster
Specify the number of disk sectors per cluster. Must be a power of 2, i.e. 1, 2, 4, 8, ... 128.
-S logical-sector-size
Specify the number of bytes per logical sector. Must be a power of 2 and greater than or equal to 512, i.e. 512, 1024, 2048, 4096,
8192, 16384, or 32768.
-v Verbose execution.
BUGS
None are know at the moment. If you find any, please report it them to <hpa@yggdrasil.com>. Please include the version number (Yggdrasil
0.3a).
AUTHOR
Dave Hudson - <dave@humbug.demon.co.uk>; modified by Peter Anvin <hpa@yggdrasil.com>. Fixes and additions by Roman Hodek
<Roman.Hodek@informatik.uni-erlangen.de> for Debian/GNU Linux.
ACKNOWLEDGEMENTS
mkdosfs is based on code from mke2fs (written by Remy Card - <card@masi.ibp.fr>) which is itself based on mkfs (written by Linus Torvalds -
<torvalds@cs.helsinki.fi>).
SEE ALSO dosfsck(8), mkfs(8)Version 2.x 5 May 1995 MKDOSFS(8)