FOOMATIC-GETPJLOPTIONS(8) System Manager's Manual FOOMATIC-GETPJLOPTIONS(8)NAME
foomatic-getpjloptions - <put a short description here>
SYNOPSIS
foomatic-getpjloptions device
foomatic-getpjloptions hostname port
DESCRIPTION
foomatic-getpjloptions Sends a set of PJL commands and reads back the PJL options and status from a printer over a network connection or
device bidirectional interface such as parallel, USB, serial. printers to standard output. The output can be piped into foomatic-addpjlop-
tions to add options to the database.
Options
device The interface to which a local printer is connected, e.g. /dev/lp0, /dev/usb/lp0, /dev/tty00, etc. For a parallel port, you must
have bidirectional support enabled at the BIOS level and the parallel port driver must support the bidirectional mode. Check
your parallel port BIOS settings for EPP/bi-directional mode.
hostname Host name or IP address of a network printer (HP JetDirect, DLINK, etc.).
port Port on which your network printer listens for socket (Appsocket) connections. Most common ports are 9100 (JetDirect), 10000
(DLINK). Usually you can configure the port via a configuration interface.
EXIT STATUS
foomatic-getpjloptions returns ???
AUTHOR
Manfred Wassmann <manolo@NCC-1701.B.Shuttle.de> for the foomatic project using output from the associated binary. Modified by Patrick Pow-
ell <papowell at lprng.com> to provide betters support for network printers, error messages, and remove CR and FF from output.
WARNINGS
Uni-directional protocols as remote LPD are not supported as no status is returned. Some network print servers which attach to a printer
parallel port do not support bidirectional mode.
Foomatic Project 2001-05-07 FOOMATIC-GETPJLOPTIONS(8)
Check Out this Related Man Page
FOOMATIC-PPDFILE(1) General Commands Manual FOOMATIC-PPDFILE(1)NAME
foomatic-ppdfile - Generate a PPD file for a given printer/driver combo
SYNOPSIS
foomatic-ppdfile [-w] [-d <driver>] -p <printerid>
foomatic-ppdfile [-A] [-P pattern]
foomatic-ppdfile -h
DESCRIPTION
The first form of the foomatic-ppdfile to compute the spooler-independent Foomatic PPD file for any valid printer/driver combo available in
the Foomatic database, both for printing with foomatic-rip(1) and for applications/clients being able to access the printer's options. The
PPD file is returned on standard ouput. If the driver is not specified, the default driver is used.
The second form of the foomatic-ppdfile program will search the printer database and return either all printer entries or those whose name
and/or model information match a regular expression.
The last form prints a help message and exits.
Options
-d drivername
The (optional) driver name to use. If the driver name is not supplied, the default or first driver in the printers compatible driver
list is used.
-p printer id The printer id.
-w Return a PPD file that conforms to the Microsoft Windows format limitations.
-A Return all printer entries in the database.
-Ppattern
Return all printer entries in the database which match the regular expression.
SEE ALSO
foomatic-rip(1)EXIT STATUS
foomatic-ppdfile returns 0 on success, 1 otherwise.
AUTHOR
Manfred Wassmann <manolo@NCC-1701.B.Shuttle.de> for the foomatic project using output from the associated binary.
Modified and updated by Patrick Powell <papowell at astart.com>.
BUGS
None so far.
Please post bug reports on
http://lists.freestandards.org/mailman/listinfo/printing-foomatic
Foomatic Project 2001-05-07 FOOMATIC-PPDFILE(1)
Hi..
i am using HP UX 11.00.. and i amtrying to connect a network printer to the server and creat a print queue using HP JetDirect utility.I down loaded the Hp11e118.SD driver for Hp jetdirect and trying to install it using swinstall -s /tmp/Hp11e118.SD
It was installed first time but eror... (2 Replies)
Here is response from HP-s support service:
"""
I understand that you need information, whether you can use your
CD-Writer on parallel port with HP-UX 11.00 Operating system and you need compatible
software for creating CDs.
HP does not support the HP CD-Writer parallel port on... (1 Reply)
Hello,i have laserjet 1000 usb printer on fbsd 4.7
when i connect it to usb, usbdev tells me it is working, on port ulpt0 (whatever). When i send some data to port it doesn't tell me any error, printcap is modifyed according manual,
and
lpr -Plj /etc/rc.conf gives me following error
/kernel:... (1 Reply)
Hi,
I am trying to print ro a netwerkprinter on AIX.
The printer is connected to a accton printserverbox. The box has three paralell ports and one IP adress. How can I print to the first port?
I made standard printq's, and I added the printer to the /etc/hosts file (1 Reply)
Running SCO 5.0.5 with all the updates available on a Compaq 800 and just ran into this problem of the printer that is hooked up to /dev/lp0 &or /dev/lp. The printer has been working fine for 5 plus years and still works on another machine. I've uninstalled & re-installed the parallel port and... (0 Replies)
Hey guys!!
I just had changed my server and the new one does not have a parallel port, only usb, and I donīt know how to make a usb printer work. Iīm using sco openserver 5.0.7
Someone can help me?
:confused: (1 Reply)
I am having issues with SCO recognizing my parallel port. The port is being used so I can run dialogic using a dongle for the serial number but the port is not noticed. It is turned on in the bios and should work fine but when I attempt to run the software I get errno=6 and it appears to not be... (0 Replies)
I'm going to undertake a hardware refresh soon and I was wondering if it is possible to run two machines (X and Y) with the same hostname (but different IP addresses) on the same network? Server X is the original server and has an entry in DNS. Server Y is the new server and won't have an entry... (1 Reply)
I have a number of Windows CE operator terminals. They have facility to print alarms/messages to ...
aser or Inkjet (so they're using PCL).
USB or IP. IP connection takes just the IP address.
Question
How could I create a service or daemon on a server to capture all this data?... (7 Replies)
hi everyone.
i would like to know if it possible to send a file directly on printserver,
ex: cat /etc/rc > /dev/lp0 (the parallel port)
cat /etc/rc > /dev/laser1 (laser1 is a printer with a printserver)
without using the lp command ?
i m using sco openserver 5.0.7.
thanks. (2 Replies)
Hi,
We have a Unix 3.2v5.0.5.
I installed a printer via scoadmin, HP network printer manager with network peripheral name an ip-adress.
This is the configuration file :
Code:
root@sco1 # cat configurationBanner: on:AlwaysContent types: simpleDevice: /dev/null
Interface:... (2 Replies)
I have a print file taken from the print spooler and I want to delete all the formatting leaving only the text. If you vi the file it shows "\304\304 ...." which translates into a printed line on print output.
I need to be able to edit and pass this file to another process
Thnaks (10 Replies)
I am using AIX 5.
Just swapped over an HP printer.
The old printer was on a JetDirect box. The new printer connects directly to the network. Using the same IP address to print to, so the only alteration I made was to edit the etc/qconfig file to alter the port setting from 9103 to 9100. I can... (2 Replies)