FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)
NAME
fence_intelmodular - Fence agent for Intel Modular
DESCRIPTION
fence_intelmodular is an I/O Fencing agent which can be used with Intel Modular device (tested on Intel MFSYS25, should work with MFSYS35
as well).
Note: Since firmware update version 2.7, SNMP v2 write support is removed, and replaced by SNMP v3 support. So agent now has default SNMP
version 3. If you are using older firmware, please supply -d for command line and snmp_version option for your cluster.conf.
fence_intelmodular accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the
agent. fence_intelmodular can be run by itself with command line options. This is useful for testing and for turning outlets on or off
from scripts.
Vendor URL: http://www.intel.com
PARAMETERS
-o, --action=<action>
Fencing Action (Default Value: reboot)
-a, --ip=<ip>
IP Address or Hostname This parameter is always required.
-l, --username=<name>
Login Name
-p, --password=<password>
Login password or passphrase
-S, --password-script=<script>
Script to retrieve password
-n, --plug=<id>
Physical plug number or name of virtual machine This parameter is always required.
-d, --snmp-version=<ver>
Specifies SNMP version to use (1,2c,3)
-c, --community=<community>
Set the community string
-b, --snmp-auth-prot=<prot>
Set authentication protocol (MD5|SHA)
-E, --snmp-sec-level=<level>
Set security level (noAuthNoPriv|authNoPriv|authPriv)
-B, --snmp-priv-prot=<prot>
Set privacy protocol (DES|AES)
-P, --snmp-priv-passwd=<pass>
Set privacy protocol password
-R, --snmp-priv-passwd-script
Script to run to retrieve privacy password
-u, --udpport
UDP/TCP port to use for connection with device (Default Value: 161)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-v, --verbose
Verbose mode
-D, --debug-file=<debugfile>
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=<char>
Separator for CSV created by operation list (Default Value: ,)
--power-timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
--shell-timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--login-timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay
Wait X seconds before fencing is started (Default Value: 0)
--retry-on
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
monitor
Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
metadata
The operational behavior of this is not known.
STDIN PARAMETERS
action Fencing Action (Default Value: reboot)
ipaddr IP Address or Hostname This parameter is always required.
login Login Name
passwd Login password or passphrase
passwd_script
Script to retrieve password
port Physical plug number or name of virtual machine This parameter is always required.
snmp_version
Specifies SNMP version to use (1,2c,3)
community
Set the community string
snmp_auth_prot
Set authentication protocol (MD5|SHA)
snmp_sec_level
Set security level (noAuthNoPriv|authNoPriv|authPriv)
snmp_priv_prot
Set privacy protocol (DES|AES)
snmp_priv_passwd
Set privacy protocol password
snmp_priv_passwd_script
Script to run to retrieve privacy password
udpport
UDP/TCP port to use for connection with device (Default Value: 161)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_intelmodular (Fence Agent) 2009-10-20 FENCE_AGENT(8)