LaTeXML::Package(3pm) User Contributed Perl Documentation LaTeXML::Package(3pm)
NAME
"LaTeXML::Package" - Support for package implementations and document customization.
SYNOPSIS
This package defines and exports most of the procedures users will need to customize or extend LaTeXML. The LaTeXML implementation of some
package might look something like the following, but see the installed "LaTeXML/Package" directory for realistic examples.
use LaTeXML::Package;
use strict;
#
# Load "anotherpackage"
RequirePackage('anotherpackage');
#
# A simple macro, just like in TeX
DefMacro(' hesection', ' hechapter.
oman{section}');
#
# A constructor defines how a control sequence generates XML:
DefConstructor(' hanks{}', "<ltx:thanks>#1</ltx:thanks>");
#
# And a simple environment ...
DefEnvironment('{abstract}','<abstract>#body</abstract>');
#
# A math symbol Real to stand for the Reals:
DefMath('Real', "x{211D}", role=>'ID');
#
# Or a semantic floor:
DefMath('floor{}','leftlfloor#1
ight
floor');
#
# More esoteric ...
# Use a RelaxNG schema
RelaxNGSchema("MySchema");
# Or use a special DocType if you have to:
# DocType("rootelement",
# "-//Your Site//Your DocType",'your.dtd',
# prefix=>"http://whatever/");
#
# Allow sometag elements to be automatically closed if needed
Tag('prefix:sometag', autoClose=>1);
#
# Don't forget this, so perl knows the package loaded.
1;
DESCRIPTION
To provide a LaTeXML-specific version of a LaTeX package "mypackage.sty" or class "myclass.cls" (so that eg. "usepackage{mypackage}"
works), you create the file "mypackage.sty.ltxml" or "myclass.cls.ltxml" and save it in the searchpath (current directory, or one of the
directories given to the --path option, or possibly added to the variable SEARCHPATHS). Similarly, to provide document-specific
customization for, say, "mydoc.tex", you would create the file "mydoc.latexml" (typically in the same directory). However, in the first
cases, "mypackage.sty.ltxml" are loaded instead of "mypackage.sty", while a file like "mydoc.latexml" is loaded in addition to "mydoc.tex".
In either case, you'll "use LaTeXML::Package;" to import the various declarations and defining forms that allow you to specify what should
be done with various control sequences, whether there is special treatment of certain document elements, and so forth. Using
"LaTeXML::Package" also imports the functions and variables defined in LaTeXML::Global, so see that documentation as well.
Since LaTeXML attempts to mimic TeX, a familiarity with TeX's processing model is also helpful. Additionally, it is often useful, when
implementing non-trivial behaviour, to think TeX-like.
Many of the following forms take code references as arguments or options. That is, either a reference to a defined sub, "&somesub", or an
anonymous function sub { ... }. To document these cases, and the arguments that are passed in each case, we'll use a notation like
CODE($token,..).
Control Sequences
Many of the following forms define the behaviour of control sequences. In TeX you'll typically only define macros. In LaTeXML, we're
effectively redefining TeX itself, so we define macros as well as primitives, registers, constructors and environments. These define the
behaviour of these commands when processed during the various phases of LaTeX's immitation of TeX's digestive tract.
The first argument to each of these defining forms ("DefMacro", "DefPrimive", etc) is a prototype consisting of the control sequence being
defined along with the specification of parameters required by the control sequence. Each parameter describes how to parse tokens
following the control sequence into arguments or how to delimit them. To simplify coding and capture common idioms in TeX/LaTeX
programming, latexml's parameter specifications are more expressive than TeX's "def" or LaTeX's "
ewcommand". Examples of the
prototypes for familiar TeX or LaTeX control sequences are:
DefConstructor('usepackage[]{}',...
DefPrimitive('multiply Variable SkipKeyword:by Number',..
DefPrimitive('
ewcommand OptionalMatch:* {Token}[][]{}', ...
Control Sequence Parameters
The general syntax for parameter for a control sequence is something like
OpenDelim? Modifier? Type (: value (| value)* )? CloseDelim?
The enclosing delimiters, if any, are either {} or [], affect the way the argument is delimited. With {}, a regular TeX argument (token or
sequence balanced by braces) is read before parsing according to the type (if needed). With [], a LaTeX optional argument is read,
delimited by (non-nested) square brackets.
The modifier can be either "Optional" or "Skip", allowing the argument to be optional. For "Skip", no argument is contributed to the
argument list.
The shorthands {} and [] default the type to "Plain" and reads a normal TeX argument or LaTeX default argument.
The predefined argument types are as follows.
"Plain", "Semiverbatim"
Reads a standard TeX argument being either the next token, or if the next token is an {, the balanced token list. In the case of
"Semiverbatim", many catcodes are disabled, which is handy for URL's, labels and similar.
"Token", "XToken"
Read a single TeX Token. For "XToken", if the next token is expandable, it is repeatedly expanded until an unexpandable token remains,
which is returned.
"Number", "Dimension", "Glue" or "MuGlue"
Read an Object corresponding to Number, Dimension, Glue or MuGlue, using TeX's rules for parsing these objects.
"Until:"match
Reads tokens until a match to the tokens match is found, returning the tokens preceding the match. This corresponds to TeX delimited
arguments.
"UntilBrace"
Reads tokens until the next open brace "{". This corresponds to the peculiar TeX construct "deffoo#{...".
"Match:"match(|match)*, "Keyword:"match(|match)*
Reads tokens expecting a match to one of the token lists match, returning the one that matches, or undef. For "Keyword", case and
catcode of the matches are ignored. Additionally, any leading spaces are skipped.
"Balanced"
Read tokens until a closing }, but respecting nested {} pairs.
"Variable"
Reads a token, expanding if necessary, and expects a control sequence naming a writable register. If such is found, it returns an
array of the corresponding definition object, and any arguments required by that definition.
"SkipSpaces"
Skips any space tokens, but contributes nothing to the argument list.
Control of Scoping
Most defining commands accept an option to control how the definition is stored, "scope=>$scope", where $scope can be c<'global'> for
global definitions, 'local', to be stored in the current stack frame, or a string naming a scope. A scope saves a set of definitions and
values that can be activated at a later time.
Particularly interesting forms of scope are those that get automatically activated upon changes of counter and label. For example,
definitions that have "scope=>'section:1.1'" will be activated when the section number is "1.1", and will be deactivated when the section
ends.
Macros
"DefMacro($prototype,$string | $tokens | $code,%options);"
Defines the macro expansion for $prototype. If a $string is supplied, it will be tokenized at definition time, and any macro arguments
will be substituted for parameter indicators (eg #1) at expansion time; the result is used as the expansion of the control sequence.
The only option, other than "scope", is "isConditional" which should be true, for conditional control sequences (TeX uses these to keep
track of conditional nesting when skipping to else or fi).
If defined by $code, the form is "CODE($gullet,@args)" and it must return a list of LaTeXML::Token's.
"DefMacroI($cs,$paramlist,$string | $tokens | $code,%options);"
Internal form of "DefMacro" where the control sequence and parameter list have already been parsed; useful for definitions from within
code. Also, slightly more efficient for macros with no arguments (use "undef" for $paramlist).
Primitives
"DefPrimitive($prototype,CODE($stomach,@args),%options);"
Define a primitive control sequence. These are usually done for side effect and so CODE should end with "return;", but can also return
a list of digested items.
The only option is for the special case: "isPrefix=>1" is used for assignment prefixes (like global).
"DefPrimitiveI($cs,$paramlist,CODE($stomach,@args),%options);"
Internal form of "DefPrimitive" where the control sequence and parameter list have already been parsed; useful for definitions from
within code.
"DefRegister($prototype,$value,%options);"
Defines a register with the given initial value (a Number, Dimension, Glue, MuGlue or Tokens --- I haven't handled Box's yet).
Usually, the $prototype is just the control sequence, but registers are also handled by prototypes like "count{Number}". "DefRegister"
arranges that the register value can be accessed when a numeric, dimension, ... value is being read, and also defines the control
sequence for assignment.
Options are
"readonly"
specifies if it is not allowed to change this value.
"getter"=>CODE(@args) =item "setter"=>CODE($value,@args)
By default the value is stored in the State's Value table under a name concatenating the control sequence and argument values.
These options allow other means of fetching and storing the value.
"DefRegisterI($cs,$paramlist,$value,%options);"
Internal form of "DefRegister" where the control sequence and parameter list have already been parsed; useful for definitions from
within code.
Constructors
"DefConstructor($prototype,$xmlpattern | $code,%options);"
The Constructor is where LaTeXML really starts getting interesting; invoking the control sequence will generate an arbitrary XML
fragment in the document tree. More specifically: during digestion, the arguments will be read and digested, creating a
LaTeXML::Whatsit to represent the object. During absorbtion by the LaTeXML::Document, the "Whatsit" will generate the XML fragment
according to the replacement $xmlpattern, or by executing "CODE".
The $xmlpattern is simply a bit of XML as a string with certain substitutions to be made. The substitutions are of the following
forms:
If code is supplied, the form is "CODE($document,@args,%properties)"
#1, #2 ... #name
These are replaced by the corresponding argument (for #1) or property (for #name) stored with the Whatsit. Each are turned into a
string when it appears as in an attribute position, or recursively processed when it appears as content.
"&function(@args)"
Another form of substituted value is prefixed with "&" which invokes a function. For example, " &func(#1) " would invoke the
function "func" on the first argument to the control sequence; what it returns will be inserted into the document.
"?COND(pattern)" or "?COND(ifpattern)(elsepattern)"
Patterns can be conditionallized using this form. The "COND" is any of the above expressions, considered true if the result is
non-empty. Thus "?#1(<foo/>)" would add the empty element "foo" if the first argument were given.
"^" If the constuctor begins with "^", the XML fragment is allowed to float up to a parent node that is allowed to contain it,
according to the Document Type.
The Whatsit property "font" is defined by default. Additional properties "body" and "trailer" are defined when "captureBody" is true,
or for environments. By using "$whatsit->setProperty(key=>$value);" within "afterDigest", or by using the "properties" option, other
properties can be added.
DefConstructor options are
mode=>(text|display_math|inline_math)
Changes to this mode during digestion.
bounded=>boolean
If true, TeX grouping (ie. "{}") is enforced around this invocation.
requireMath=>boolean
forbidMath=>boolean
These specify whether the given constructor can only appear, or cannot appear, in math mode.
font=>{fontspec...}
Specifies the font to be set by this invocation. See "MergeFont" If the font change is to only apply to this construct, you would
also use "<bounded="1>>.
reversion=>$texstring or CODE($whatsit,#1,#2,...)
Specifies the reversion of the invocation back into TeX tokens (if the default reversion is not appropriate). The $textstring
string can include #1,#2... The CODE is called with the $whatsit and digested arguments.
properties=>{prop=>value,...} or CODE($stomach,#1,#2...)
This option supplies additional properties to be set on the generated Whatsit. In the first form, the values can be of any type,
but(1) if it is a code references, it takes the same args ($stomach,#1,#2,...) and should return a value. and(2) if the value is
a string, occurances of #1 (etc) are replaced by the corresponding argument. In the second form, the code should return a hash of
properties.
beforeDigest=>CODE($stomach)
This option supplies a Daemon to be executed during digestion just before the Whatsit is created. The CODE should either return
nothing (return;) or a list of digested items (Box's,List,Whatsit). It can thus change the State and/or add to the digested
output.
afterDigest=>CODE($stomach,$whatsit)
This option supplies a Daemon to be executed during digestion just after the Whatsit is created. it should either return nothing
(return;) or digested items. It can thus change the State, modify the Whatsit, and/or add to the digested output.
beforeConstruct=>CODE($document,$whatsit)
Supplies CODE to execute before constructing the XML (generated by $replacement).
afterConstruct=>CODE($document,$whatsit)
Supplies CODE to execute after constructing the XML.
captureBody=>boolean or Token
if true, arbitrary following material will be accumulated into a `body' until the current grouping level is reverted, or till the
"Token" is encountered if the option is a "Token". This body is available as the "body" property of the Whatsit. This is used by
environments and math.
alias=>$control_sequence
Provides a control sequence to be used when reverting Whatsit's back to Tokens, in cases where it isn't the command used in the
$prototype.
nargs=>$nargs
This gives a number of args for cases where it can't be infered directly from the $prototype (eg. when more args are explictly read
by Daemons).
scope=>$scope
See "scope".
"DefConstructorI($cs,$paramlist,$xmlpattern | $code,%options);"
Internal form of "DefConstructor" where the control sequence and parameter list have already been parsed; useful for definitions from
within code.
"DefMath($prototype,$tex,%options);"
A common shorthand constructor; it defines a control sequence that creates a mathematical object, such as a symbol, function or
operator application. The options given can effectively create semantic macros that contribute to the eventual parsing of mathematical
content. In particular, it generates an XMDual using the replacement $tex for the presentation. The content information is drawn from
the name and options
These "DefConstructor" options also apply:
reversion, alias, beforeDigest, afterDigest,
beforeConstruct, afterConstruct and scope.
Additionally, it accepts
style=>astyle
adds a style attribute to the object.
name=>aname
gives a name attribute for the object
omcd=>cdname
gives the OpenMath content dictionary that name is from.
role=>grammatical_role
adds a grammatical role attribute to the object; this specifies the grammatical role that the object plays in surrounding
expressions. This direly needs documentation!
font=>{fontspec}
Specifies the font to be used for when creating this object. See "MergeFont".
scriptpos=>boolean
Controls whether any sub and super-scripts will be stacked over or under this object, or whether they will appear in the usual
position.
WRONG: Redocument this!
operator_role=>grammatical_role
operator_scriptpos=>boolean
These two are similar to "role" and "scriptpos", but are used in unusual cases. These apply to the given attributes to the
operator token in the content branch.
nogroup=>boolean
Normally, these commands are digested with an implicit grouping around them, so that changes to fonts, etc, are local. Providing
"<noggroup="1>> inhibits this.
"DefMathI($cs,$paramlist,$tex,%options);"
Internal form of "DefMath" where the control sequence and parameter list have already been parsed; useful for definitions from within
code.
"DefEnvironment($prototype,$replacement,%options);"
Defines an Environment that generates a specific XML fragment. The $replacement is of the same form as that for DefConstructor, but
will generally include reference to the "#body" property. Upon encountering a "egin{env}": the mode is switched, if needed, else a
new group is opened; then the environment name is noted; the beforeDigest daemon is run. Then the Whatsit representing the begin
command (but ultimately the whole environment) is created and the afterDigestBegin daemon is run. Next, the body will be digested and
collected until the balancing "end{env}". Then, any afterDigest daemon is run, the environment is ended, finally the mode is ended
or the group is closed. The body and "end{env}" whatsit are added to the "egin{env}"'s whatsit as body and trailer, respectively.
It shares options with "DefConstructor":
mode, requireMath, forbidMath, properties, nargs,
font, beforeDigest, afterDigest, beforeConstruct,
afterConstruct and scope.
Additionally, "afterDigestBegin" is effectively an "afterDigest" for the "egin{env}" control sequence.
"DefEnvironmentI($name,$paramlist,$replacement,%options);"
Internal form of "DefEnvironment" where the control sequence and parameter list have already been parsed; useful for definitions from
within code.
Class and Packages
"RequirePackage($package,%options);"
Finds and loads a package implementation (usually "*.sty.ltxml", unless "raw" is specified) for the required $package. The options
are:
"type=>type" specifies the file type (default "sty".
"options=>[...]" specifies a list of package options.
"raw=>1" specifies that it is allowable to try to read a raw TeX style file.
"LoadClass($class,%options);"
Finds and loads a class definition (usually "*.cls.ltxml"). The only option is
"options=>[...]" specifies a list of class options.
"FindFile($name,%options);"
Find an appropriate file with the given $name in the current directories in "SEARCHPATHS". If a file ending with ".ltxml" is found, it
will be preferred. The options are:
"type=>type" specifies the file type (default "sty".
"raw=>1" specifies that it is allowable to try to read a raw TeX style file.
"DeclareOption($option,$code);"
Declares an option for the current package or class. The $code can be a string or Tokens (which will be macro expanded), or can be a
code reference which is treated as a primitive.
If a package or class wants to accomodate options, it should start with one or more "DeclareOptions", followed by "ProcessOptions()".
"PassOptions($name,$ext,@options);"
Causes the given @options (strings) to be passed to the package (if $ext is "sty") or class (if $ext is "cls") named by $name.
"ProcessOptions();"
Processes the options that have been passed to the current package or class in a fashion similar to LaTeX. If the keyword "inorder=>1"
is given, the options are processed in the order they were used, like "ProcessOptions*".
"ExecuteOptions(@options);"
Process the options given explicitly in @options.
Counters and IDs
"NewCounter($ctr,$within,%options);"
Defines a new counter, like LaTeX's
ewcounter, but extended. It defines a counter that can be used to generate reference numbers,
and defines he$ctr, etc. It also defines an "uncounter" which can be used to generate ID's (xml:id) for unnumbered objects. $ctr is
the name of the counter. If defined, $within is the name of another counter which, when incremented, will cause this counter to be
reset. The options are
idprefix Specifies a prefix to be used to generate ID's
when using this counter
nested Not sure that this is even sane.
"$num = CounterValue($ctr);"
Fetches the value associated with the counter $ctr.
"$tokens = StepCounter($ctr);"
Analog of "stepcounter", steps the counter and returns the expansion of " he$ctr". Usually you should use "RefStepCounter($ctr)"
instead.
"$keys = RefStepCounter($ctr);"
Analog of "
efstepcounter", steps the counter and returns a hash containing the keys "refnum="$refnum, id=>$id>. This makes it
suitable for use in a "properties" option to constructors. The "id" is generated in parallel with the reference number to assist
debugging.
"$keys = RefStepID($ctr);"
Like to "RefStepCounter", but only steps the "uncounter", and returns only the id; This is useful for unnumbered cases of objects that
normally get both a refnum and id.
"ResetCounter($ctr);"
Resets the counter $ctr to zero.
"GenerateID($document,$node,$whatsit,$prefix);"
Generates an ID for nodes during the construction phase, useful for cases where the counter based scheme is inappropriate. The calling
pattern makes it appropriate for use in Tag, as in
Tag('ltx:para',sub { GenerateID(@_,'p'); })
If $node doesn't already have an xml:id set, it computes an appropriate id by concatenating the xml:id of the closest ancestor with an
id (if any), the prefix and a unique counter.
Document Model
Constructors define how TeX markup will generate XML fragments, but the Document Model is used to control exactly how those fragments are
assembled.
"Tag($tag,%properties);"
Declares properties of elements with the name $tag.
The recognized properties are:
autoOpen=>boolean
Specifies whether this $tag can be automatically opened if needed to insert an element that can only be contained by $tag. This
property can help match the more SGML-like LaTeX to XML.
autoClose=>boolean
Specifies whether this $tag can be automatically closed if needed to close an ancestor node, or insert an element into an ancestor.
This property can help match the more SGML-like LaTeX to XML.
afterOpen=>CODE($document,$box)
Provides CODE to be run whenever a node with this $tag is opened. It is called with the document being constructed, and the
initiating digested object as arguments. It is called after the node has been created, and after any initial attributes due to the
constructor (passed to openElement) are added.
afterClose=>CODE($document,$box)
Provides CODE to be run whenever a node with this $tag is closed. It is called with the document being constructed, and the
initiating digested object as arguments.
"RelaxNGSchema($schemaname);"
Specifies the schema to use for determining document model. You can leave off the extension; it will look for ".rng", and maybe
eventually, ".rnc" once that is implemented.
"RegisterNamespace($prefix,$URL);"
Declares the $prefix to be associated with the given $URL. These prefixes may be used in ltxml files, particularly for constructors,
xpath expressions, etc. They are not necessarily the same as the prefixes that will be used in the generated document (See DocType).
"DocType($rootelement,$publicid,$systemid,%namespaces);"
Declares the expected rootelement, the public and system ID's of the document type to be used in the final document. The hash
%namespaces specifies the namespaces prefixes that are expected to be found in the DTD, along with each associated namespace URI. Use
the prefix "#default" for the default namespace (ie. the namespace of non-prefixed elements in the DTD).
The prefixes defined for the DTD may be different from the prefixes used in implementation CODE (eg. in ltxml files; see
RegisterNamespace). The generated document will use the namespaces and prefixes defined for the DTD.
Document Rewriting
During document construction, as each node gets closed, the text content gets simplfied. We'll call it applying ligatures, for lack of a
better name.
"DefLigature($regexp,%options);"
Apply the regular expression (given as a string: "/fa/fa/" since it will be converted internally to a true regexp), to the text
content. The only option is "fontTest=CODE($font)"; if given, then the substitution is applied only when "fontTest" returns true.
Predefined Ligatures combine sequences of "." or single-quotes into appropriate Unicode characters.
"DefMathLigature(CODE($document,@nodes));"
CODE is called on each sequence of math nodes at a given level. If they should be replaced, return a list of
"($n,$string,%attributes)" to replace the text content of the first node with $string content and add the given attributes. The next
"$n-1" nodes are removed. If no replacement is called for, CODE should return undef.
Predefined Math Ligatures combine letter or digit Math Tokens (XMTok) into multicharacter symbols or numbers, depending on the font
(non math italic).
After document construction, various rewriting and augmenting of the document can take place.
"DefRewrite(%specification);"
"DefMathRewrite(%specification);"
These two declarations define document rewrite rules that are applied to the document tree after it has been constructed, but before
math parsing, or any other postprocessing, is done. The %specification consists of a seqeuence of key/value pairs with the initial
specs successively narrowing the selection of document nodes, and the remaining specs indicating how to modify or replace the selected
nodes.
The following select portions of the document:
label =>$label
Selects the part of the document with label=$label
scope =>$scope
The $scope could be "label:foo" or "section:1.2.3" or something similar. These select a subtree labelled 'foo', or a section with
reference number "1.2.3"
xpath =>$xpath
Select those nodes matching an explicit xpath expression.
match =>$TeX
Selects nodes that look like what the processing of $TeX would produce.
regexp=>$regexp
Selects text nodes that match the regular expression.
The following act upon the selected node:
attributes => $hash
Adds the attributes given in the hash reference to the node.
replace =>$replacement
Interprets the $replacement as TeX code to generate nodes that will replace the selected nodes.
Mid-Level support
"$tokens = Expand($tokens);"
Expands the given $tokens according to current definitions.
"$boxes = Digest($tokens);"
Processes and digestes the $tokens. Any arguments needed by control sequences in $tokens must be contained within the $tokens itself.
"@tokens = Invocation($cs,@args);"
Constructs a sequence of tokens that would invoke the token $cs on the arguments.
"RawTeX('... tex code ...');"
RawTeX is a convenience function for including chunks of raw TeX (or LaTeX) code in a Package implementation. It is useful for copying
portions of the normal implementation that can be handled simply using macros and primitives.
"Let($token1,$token2);"
Gives $token1 the same `meaning' (definition) as $token2; like TeX's let.
Argument Readers
"ReadParameters($gullet,$spec);"
Reads from $gullet the tokens corresponding to $spec (a Parameters object).
"DefParameterType($type,CODE($gullet,@values),%options);"
Defines a new Parameter type, $type, with CODE for its reader.
Options are:
reversion=>CODE($arg,@values);
This CODE is responsible for converting a previously parsed argument back into a sequence of Token's.
optional=>boolean
whether it is an error if no matching input is found.
novalue=>boolean
whether the value returned should contribute to argument lists, or simply be passed over.
semiverbatim=>boolean
whether the catcode table should be modified before reading tokens.
"DefColumnType($proto,$expansion);"
Defines a new column type for tabular and arrays. $proto is the prototype for the pattern, analogous to the pattern used for other
definitions, except that macro being defined is a single character. The $expansion is a string specifying what it should expand into,
typically more verbose column specification.
Access to State
"$value = LookupValue($name);"
Lookup the current value associated with the the string $name.
"AssignValue($name,$value,$scope);"
Assign $value to be associated with the the string $name, according to the given scoping rule.
Values are also used to specify most configuration parameters (which can therefor also be scoped). The recognized configuration
parameters are:
VERBOSITY : the level of verbosity for debugging
output, with 0 being default.
STRICT : whether errors (eg. undefined macros)
are fatal.
INCLUDE_COMMENTS : whether to preserve comments in the
source, and to add occasional line
number comments. (Default true).
PRESERVE_NEWLINES : whether newlines in the source should
be preserved (not 100% TeX-like).
By default this is true.
SEARCHPATHS : a list of directories to search for
sources, implementations, etc.
"PushValue($type,$name,@values);"
This is like "AssignValue", but pushes values onto the end of the value, which should be a LIST reference. Scoping is not handled here
(yet?), it simply pushes the value onto the last binding of $name.
"UnshiftValue($type,$name,@values);"
Similar to "PushValue", but pushes a value onto the front of the values, which should be a LIST reference.
"$value = LookupCatcode($char);"
Lookup the current catcode associated with the the character $char.
"AssignCatcode($char,$catcode,$scope);"
Set $char to have the given $catcode, with the assignment made according to the given scoping rule.
This method is also used to specify whether a given character is active in math mode, by using "math:$char" for the character, and
using a value of 1 to specify that it is active.
"$meaning = LookupMeaning($token);"
Looks up the current meaning of the given $token which may be a Definition, another token, or the token itself if it has not otherwise
been defined.
"$defn = LookupDefinition($token);"
Looks up the current definition, if any, of the $token.
"InstallDefinition($defn);"
Install the Definition $defn into $STATE under its control sequence.
Low-level Functions
"CleanLabel($label,$prefix);"
Cleans a $label of disallowed characters, prepending $prefix (or "LABEL", if none given).
"CleanIndexKey($key);"
Cleans an index key, so it can be used as an ID.
"CleanBibKey($key);"
Cleans a bibliographic citation key, so it can be used as an ID.
"CleanURL($url);"
Cleans a url.
"UTF($code);"
Generates a UTF character, handy for the the 8 bit characters. For example, "UTF(0xA0)" generates the non-breaking space.
"MergeFont(%style);"
Set the current font by merging the font style attributes with the current font. The attributes and likely values (the values aren't
required to be in this set):
family : serif, sansserif, typewriter, caligraphic,
fraktur, script
series : medium, bold
shape : upright, italic, slanted, smallcaps
size : tiny, footnote, small, normal, large,
Large, LARGE, huge, Huge
color : any named color, default is black
Some families will only be used in math. This function returns nothing so it can be easily used in beforeDigest, afterDigest.
"@tokens = roman($number);"
Formats the $number in (lowercase) roman numerals, returning a list of the tokens.
"@tokens = Roman($number);"
Formats the $number in (uppercase) roman numerals, returning a list of the tokens.
AUTHOR
Bruce Miller <bruce.miller@nist.gov>
COPYRIGHT
Public domain software, produced as part of work done by the United States Government & not subject to copyright in the US.
perl v5.10.1 2009-06-16 LaTeXML::Package(3pm)