Smokeping_probes_AnotherSSH(3) SmokePing Smokeping_probes_AnotherSSH(3)
NAME
Smokeping::probes::AnotherSSH - Another SSH probe
SYNOPSIS
*** Probes ***
+AnotherSSH
forks = 5
offset = 50%
step = 300
# The following variables can be overridden in each target section
greeting = SSH-Latency-Measurement-Sorry-for-this-logmessage
interval = established
mininterval = 0.5
pings = 5
port = 22
timeout = 5
# [...]
*** Targets ***
probe = AnotherSSH # if this should be the default probe
# [...]
+ mytarget
# probe = AnotherSSH # if the default probe is something else
host = my.host
greeting = SSH-Latency-Measurement-Sorry-for-this-logmessage
interval = established
mininterval = 0.5
pings = 5
port = 22
timeout = 5
DESCRIPTION
Latency measurement using SSH. This generates Logfile messages on the other Host, so get permission from the owner first!
VARIABLES
Supported probe-specific variables:
forks
Run this many concurrent processes at maximum
Example value: 5
Default value: 5
offset
If you run many probes concurrently you may want to prevent them from hitting your network all at the same time. Using the probe-
specific offset parameter you can change the point in time when each probe will be run. Offset is specified in % of total interval, or
alternatively as 'random', and the offset from the 'General' section is used if nothing is specified here. Note that this does NOT
influence the rrds itself, it is just a matter of when data acqusition is initiated. (This variable is only applicable if the variable
'concurrentprobes' is set in the 'General' section.)
Example value: 50%
step
Duration of the base interval that this probe should use, if different from the one specified in the 'Database' section. Note that the
step in the RRD files is fixed when they are originally generated, and if you change the step parameter afterwards, you'll have to
delete the old RRD files or somehow convert them. (This variable is only applicable if the variable 'concurrentprobes' is set in the
'General' section.)
Example value: 300
Supported target-specific variables:
greeting
Greeting string to send to the SSH Server. This will appear in the Logfile. Use this to make clear, who you are and what you are doing
to avoid confusion.
Also, don't use something that is a valid version string. This probe assumes that the connection gets terminated because of protocol
mismatch.
Default value: SSH-Latency-Measurement-Sorry-for-this-logmessage
interval
The interval to be measured. One of:
connect
Interval between connect() and the greeting string from the host.
established
Interval between our greeting message and the end of the connection because of Protocol mismatch. This is the default.
complete
From connect() to the end of the connection.
Default value: established
mininterval
Minimum interval between the start of two connection attempts in (possibly fractional) seconds.
Default value: 0.5
pings
How many pings should be sent to each target, if different from the global value specified in the Database section. Note that the
number of pings in the RRD files is fixed when they are originally generated, and if you change this parameter afterwards, you'll have
to delete the old RRD files or somehow convert them.
Example value: 5
port
Connect to this port.
Default value: 22
timeout
Timeout for the connection.
Default value: 5
AUTHORS
Christoph Heine <Christoph.Heine@HaDiKo.DE>
2.6.8 2013-03-17 Smokeping_probes_AnotherSSH(3)