plan9 man page for scc

SCC(3)							     Library Functions Manual							    SCC(3)

NAME
       scc, duart, uart - serial communication control

SYNOPSIS
       bind -a #t /dev

       /dev/eia0
       /dev/eia0ctl
       /dev/eia1
       /dev/eia1ctl

DESCRIPTION
       The  serial line devices serve a one-level directory, giving access to the serial ports.  There are several devices serving the same files;
       the particular one used depends on the machine involved.  Eia0 is a stream data file.  It can be read and written to use that port.   Reads
       will  block  until  at  least one character is available.  Eia0ctl is a stream control file associated with the port.  Eia1 and eia1ctl are
       similar, but for a second serial line.

       The ctl file can be used to push stream modules onto the port.  One can also write one of the following textual commands to a ctl file:

       bn     Set the baud rate to n.

       dn     Set DTR if n is non-zero; else clear it.

       kn     Send a break lasting n milliseconds.

       rn     Set RTS if n is non-zero; else clear it.

       mn     Obey modem CTS signal if n is non-zero; else clear it.

       pc     Set parity to odd if c is o, to even if c is e; else set no parity.

       sn     Set number of stop bits to n.  Legal values are 1 or 2.

       ln     Set number of bits per byte to n.  Legal values are 5, 6, 7, or 8.

SOURCE
       /sys/src/9/port/devscc.c
       /sys/src/9/*/devduart.c
       /sys/src/9/*/devuart.c

																	    SCC(3)