prips(1) [debian man page]

PRIPS(1)						    BSD General Commands Manual 						  PRIPS(1)

NAME

     prips -- print the IP addresses in a given range

SYNOPSIS

     prips [-c] [-d delim] [-e exclude] [-f format] [-i incr] start end
     prips [-c] [-d delim] [-e exclude] [-f format] [-i incr] CIDR-block
     prips -h

DESCRIPTION

     The prips tool can be used to print all of the IP addresses in a given range.  It can enhance tools that only work on one host at a time,
     e.g.  whois(1).

     The prips tool accepts the following command-line options:

     -c      Print the range in CIDR notation.

     -d delim
	     Set the delimiter to the character with ASCII code delim where 0 <= delim <= 255.

     -e <x.x.x,x.x>
	     Exclude ranges from the output.

     -f format
	     Set the format of addresses (hex, dec, or dot).

     -h      Show summary of options.

     -i incr
	     Set the increment to 'x'.

ENVIRONMENT

     The prips tool's operation is not influenced by any environment variables.

FILES

     The prips tool's operation is not influenced by any files.

EXAMPLES

     Display all the addresses in a reserved subnet:

	   prips 192.168.32.0 192.168.32.255

     The same, using CIDR notation:

	   prips 192.168.32/24

     Display only the usable addresses in a class A reserved subnet using a space instead of a newline for a delimiter:

	   prips -d 32 10.0.0.1 10.255.255.255

     Display every fourth address in a weird block:

	   prips -i 4 192.168.32.7 192.168.33.5

     Determine the smallest CIDR block containing two addresses:

	   prips -c 192.168.32.5 192.168.32.11

DIAGNOSTICS

     The prips utility exits 0 on success, and >0 if an error occurs.

SEE ALSO

     ipsc(1), gipsc(1)

STANDARDS

     No standards were harmed in the writing of the prips tool.

HISTORY

     The prips tool was originally written by Daniel Kelly and later adopted by Peter Pentchev.  This manual page was originally written by Juan
     Alvarez for the Debian GNU/Linux system and later added to the prips distribution and converted to mdoc format by Peter Pentchev.

AUTHORS

     Daniel Kelly <dan@vertekcorp.com>
     Juan Alvarez <jalvarez@fluidsignal.com>
     Peter Pentchev <roam@ringlet.net>

BUGS

     Please report any bugs in the prips tool to its current maintainer, Peter Pentchev.

BSD
								   March 1, 2011							       BSD

VLAN-INTERFACES(5)						   File formats 						VLAN-INTERFACES(5)

NAME

       /etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format

DESCRIPTION

       /etc/network/interfaces	contains  network  interface  configuration  information  for  the  ifup(8)  and ifdown(8) commands.  This manpage
       describes the vlan extensions to the standard interfaces(5) file format.

       Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which  are  gener-
       ally needed when using (a lot of) vlans.

VLAN CREATION

       Vlan  interface	definitions  exist  of the vlan interface name, and an optional 'raw-device' parameter.  Vlan interfaces are numbered 1 to
       4095.  You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero.  The  following
       example shows four ways to create a vlan with id 1 on interface eth0.  They all result in different names.

	iface eth0.1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan1 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface eth0.0001 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan0001 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# We don't have br support out of the box
	iface br0.2 inet static
	    vlan-raw-device br0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# Aliases are ignored
	iface br0.2:1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.255

EXTRA IFACE OPTIONS

       Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.

       vlan-raw-device devicename
	      Indicates the device to create the vlan on.  This is ignored when the devicename is part of the vlan interface name.

       ip-proxy-arp 0|1
	      Turn proxy-arp off or on for this specific interface.  This also works on plain ethernet like devices.

       ip-rp-filter 0|1|2
	      Set the return path filter for this specific interface.  This also works on plain ethernet like devices.

       hw-mac-address mac-address
	      This sets the mac address of the interface before bringing it up.  This works on any device that allows setting the hardware address
	      with the ip command.

AUTHOR

       This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>

SEE ALSO

       vconfig(8) interfaces(5)

vlan								 September 30 2007						VLAN-INTERFACES(5)