debian man page for openipmish

openipmish(1)						 Shell interface to an IPMI system					     openipmish(1)

NAME
       openipmish - Shell interface to an IPMI system

SYNOPSIS
       openipmish [option]

DESCRIPTION
       The openipmish is a command interpreter that gives the full power of the OpenIPMI library to a user-level command language.  It is designed
       so it can easily be driven with a scripting language like TCL, it has well-formed output.

       openipmish starts up with no connections or anything of that nature.  You must enter commands to make connections to domains.

OPTIONS
       --dmsg Turn on message debugging, this will dump all messages to debug log output.

       --drawmsg
	      Turn on raw message debugging, this will dump all low-level messages to debug log output.  This differes from normal message  debug-
	      ging in that all protocol messages are also dumped, not just IPMI messages.

       --dmem Turn  on	memory debugging, this will cause memory allocation and deallocations to be checked.  When the program terminates, it will
	      dump all memory that was not properly freed (leaked).

       --dlock
	      Turn on lock debugging, this will check lock operations to make sure that locks are help in all the proper places and make sure that
	      locks are properly nested.

       --snmp Enable the SNMP trap handler.  openipmish must be compiled with SNMP code enabled for this option to be available.

       --help Help output

COMMANDS
       openipmish  follows  the  standard  command syntax defined in ipmi_cmdlang(7).  See that for the details on most commands.  The IPMI manual
       that comes with OpenIPMI will also be quite handy.

       openipmish defines some commands that are not in the standard command language.	These are:

       read   Read and execute commands from the given file.

       exit   Quit

       redisp_cmd on|off
	      Normally, openipmish redisplays the command line when an event comes in.	This is nice for interactive use, but bad  for	scripting.
	      This lets you turn that function on and off.

SEE ALSO
       ipmi_cmdlang(7), ipmi_ui(1)

KNOWN PROBLEMS
       None

AUTHOR
       Corey Minyard <cminyard@mvista.org>

OpenIPMI							     05/13/03							     openipmish(1)