JACK_IMPULSE_GRABBER(1) General Commands Manual JACK_IMPULSE_GRABBER(1)NAME
jack_impulse_grabber - JACK toolkit client to grab an impulse (response)
SYNOPSIS
jack_impulse_grabber -d duration [-f (C|gnuplot)]
DESCRIPTION
jack_impulse_grabber is a JACK example client for collecting impulses recordings from JACK ports.
0-122-0 September 2012 JACK_IMPULSE_GRABBER(1)
Check Out this Related Man Page
JACK.UDP(1)JACK.UDP(1)NAME
jack.udp - JACK UDP Transport Client
SYNOPSIS
jack.udp [options] send|recv
OPTIONS -b : Set the ring buffer size in frames (default=4096). -c : Set the client name (default=jack.udp-PID). -n : Set the number of channels,
and therefore the number of JACK ports (default=2). -p : Set the port number (default=57160). -r : The remote host name, for use in send
mode (default="127.0.0.1").
DESCRIPTION
jack.udp is a UDP audio transport mechansim for JACK. The send mode reads signals from a set of JACK input ports and sends UDP packets to
the indicated port at the indicated host at a rate determined by the local JACK daemon. The recv mode reads incoming packets at the indi-
cated port and writes the incoming data to a set of JACK output ports at a rate that is determined by the local JACK daemon.
This transport mechanism is unreliable. Both send and recv clients will report buffer overflow and underflow occurences, and recv clients
will report dropped and out-of-order packets, and shutdown on channel mismatch packets. In practice this mechanism can be made highly reli-
able over local networks.
jack.udp implements no connection logic, use jack.plumbing(1) instead.
EXAMPLE
192.0.0.1:~$ jack.udp -r 192.0.0.2 send
192.0.0.2:~$ jack.udp recv
AUTHOR
Rohan Drape http://slavepianos.org/rd/
SEE ALSO jackd(1)AUTHOR
Rohan Drape <rd@slavepianos.org>
Author.
01/10/2012 JACK.UDP(1)
I have a huge matrix file containing some 1.5 million rows and 6000 columns. The matrix looks something like this:
1 2 3
4 5 6
7 8 9
3 4 5
I want to add all the numbers in the columns of this matrix and display the result to my stdout. This means that the numbers in the first column are:
... (2 Replies)
Hi,
Just trying to get to grips with sed and awk for some reporting for work and I need some assistance:
I have a file that lists policy names on the first line and then on the second line whether the policy is active or not.
Policy Name: Policy1
Active: yes
Policy... (8 Replies)
version info :
vi availabe with RHEL 5.4
I have a text file with 10,000 lines. I want to copy lines from 5000th line to 7000th and redirect to a file. Any idea how I can do this?
Note:
The above scenario is just an example. In my actual requirement, the file has 14 million lines and I want... (9 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello,
I couldn't find an actual introduction thread, so I decided to just put this here.
I go by d0wngrade online. I have been programming in multiple languages for about 15+ years. I started with standard web design languages like HTML and CSS, but I then advanced from design to development... (2 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Hi.
In thread https://www.unix.com/shell-programming-and-scripting/267833-grouping-counting.html rovf and I had a mini-discussion on grep and awk.
Here is a demo script that compares the awk and grep approaches for this single problem:
#!/usr/bin/env bash
# @(#) s2 Demonstrate group... (1 Reply)
Hello,
I have to fish out some specific columns from a file based on the header value. I have the list of columns I need in a different file. I thought I could read in the list of headers I need,
# file with header names of required columns in required order
headers_file=$2
# read contents... (11 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
I have data of an excel files as given below,
file1
org1_1 1 1 2.5 100
org1_2 1 2 5.5 98
org1_3 1 3 7.2 88
file2
org2_1 1 1 2.5 100
org2_2 1 2 5.5 56
org2_3 1 3 7.2 70
I have multiple excel files as above shown.
I have to copy column 1, column 4 and paste into a new excel file as... (26 Replies)
Dear All,
Taking a break from Vue.js coding for the site, SEO and YT videos; and hopefully addressing some well deserved criticism from some here that I have been too focused on the visual aspects of the forums versus the substance and the community....
While the "current generation... (9 Replies)
Hi all...
Well guys and gals, I jumped in at the deep end and found things that PERL cannot do by default.
Many tricky terminal escape codes are not catered for so I had to create workarounds.
One thing I searched for was this:
Passing perl variable to shell command
AND, @Neo this was... (15 Replies)