ENCODE(1) General Commands Manual ENCODE(1)NAME
dubdv - insert audio into a digital video stream
SYNOPSIS
dubdv [ options ] audio_inputfR [ filename or - for stdin ]
DESCRIPTION
dubdv reads the audio from a WAV file or the OSS DSP device and overwrites the existing audio in a raw DV file or stream.
--version
show dubdv version number.
-v, --verbose
show encoder statistics / status information.
-a, --audio-input=filter-name
Choose audio-input-filter: [none, >wav<, dsp] WAV is the default audio_input format.
-o, --output=filter-name
Choose output-filter: [>raw<]
-t, --truncate
truncate output at end of DV input.
-r, --repeat=count
repeat the first video frame count times. This option does not dub audio into the repeated frame.
Help Options
-?, --help
Show help message.
--usage
Display brief usage message.
SEE ALSO playdv(1),dvconnect(1),encodedv(1).
AVAILABILITY
See http://libdv.sourceforge.net/ for the latest version.
AUTHORS
dubdv was written by James Bowman <jamesb@excamera.com> and Peter Schlaile <udbz@rz.uni-karlsruhe.de>.
This manual page is based on dubdv's help message and was written by Dan Dennedy <dan@dennedy.org>.
January 2004 ENCODE(1)
Check Out this Related Man Page
ENCODE(1) General Commands Manual ENCODE(1)NAME
encodedv - encode a series of images to a digital video stream
SYNOPSIS
encodedv [ options ] video_pattern [ audio_input ]
DESCRIPTION
encodedv takes a series of images in PPM/PGM/video format and optionally an audio stream and compiles them into a DV-encoded video stream.
pattern specifies where the input data is located and may be either - for stdin, or a printf-style pattern taking one numeric argument that
gets replaced by the current frame number. Like image%03d.ppm, which gets expanded to image000.ppm, image001.ppm, etc.
--version
show encodedv version number.
-s, --start-frame=count
start encoding at frame number count (defaults to 0).
-e, --end-frame=count
end encoding at frame number count (defaults to unlimited).
-l, --wrong-interlace
flip lines to compensate for wrong interlacing in the input data. Happened with mpeg2dec generated data.
-p, --vlc-passes
vlc code distribution passes (1-3) greater values = better quality but not necessarily slower encoding! This defaults for best qual-
ity = 3.
-v, --verbose
show encoder statistics / status information
-i, --input=filter-name
Choose input-filter: [>ppm<, pgm, video] The ppm-filter only supports raw rgb ppm files. The pgm file format is the one generated
by mpeg2dec of the livid project. ( http://linuxvideo.org ) This means: Y-data appended by U and V data which are scaled down by 2
and placed side by side. This option defaults to PPM. Some things you want to keep in mind:
1) If you want to stream video frames (using video_pattern = "-") you have to make sure that there is no trailing garbage at the end
of the pictures. This is ignored by most image manipulation programs!
2) If you are one of the poor persons with a buggy PCI bus-mastering board be sure to have a backup handy if you want to use video
support. Some versions of the VIA board chipsets crash your machine and even your harddisk. Since encodedv uses full resolution cap-
turing it is more likely to trigger these bugs than other programs. If you have a VIA board you definitely want to upgrade to Linux
2.4.3 or higher.
3) The encoded pictures must have the correct resolution. If they don't, you may want to try ppmqscale. The used video format is
chosen by picture resolution. Use 720x576 for PAL and 720x480 for NTSC.
4) If you want to speed up things a little bit and you are generating the input pictures automatically you may want to try pgm's
instead of ppm's since they are encoded somewhat faster. But keep in mind, that this pgm format is only optimal for PAL since NTSC
averages the U and V values somewhat differently.
-a, --audio-input=filter-name
Choose audio-input-filter: [>none<, wav, dsp]
-o, --output=filter-name
Choose output-filter: [>raw<]
-q, --static-qno=table-no
Static qno tables for quantisation on 2 VLC passes. For turbo (but somewhat lossy encoding) try -q [1,2] -p [2,3]. There are only
two static qno tables registered right now:
1 : for sharp DV pictures
2 : for somewhat noisy satelite television signal
If you want to add some more, go ahead ;-)
-f, --fps=fps-number
Set frames per second (default: use all frames)
-d, --force-dct=dct-mode
Force dct mode (88 or 248) for whole picture
Help Options
-?, --help
Show help message.
--usage
Display brief usage message.
SEE ALSO playdv(1),dvconnect(1),dubdv(1),encodedv(1).
AVAILABILITY
See http://libdv.sourceforge.net/ for the latest version.
AUTHORS
encodedv was written by James Bowman <jamesb@excamera.com> and Peter Schlaile <udbz@rz.uni-karlsruhe.de>.
This manual page is based on encodedv's help message and was written by Daniel Kobras <kobras@debian.org> for the Debian GNU/Linux system
(but may be used by others). It was updated by Peter Schlaile <udbz@rz.uni-karlsruhe.de>.
April 2001 ENCODE(1)