ARATAPIF(1) General Commands Manual ARATAPIF(1)NAME
ARanyM - Atari Running on Any Machine - aratapif
SYNOPSIS
aratapif tap_device host_IP atari_IP netmask mtu_size
DESCRIPTION
This manual page documents briefly the aratapif program. This manual page was written for the Debian GNU/Linux distribution because the
original program does not have a manual page.
aratapif is used for setting up the network device in ARAnyM. It's basically stripped down version of standard ifconfig command that works
on the TAP device only and so it's safe to setuid root.
AUTHOR
This manual page was written by Antonin Kral <A.Kral@sh.cvut.cz>, for the Debian GNU/Linux system (but may be used by others).
April 11, 2003 ARATAPIF(1)
Check Out this Related Man Page
WMKBD(1) General Commands Manual WMKBD(1)NAME
gtkguitune - KGuitune
SYNOPSIS
gtkguitune
DESCRIPTION
This manual page documents briefly the gtkguitune program. This manual page was written for the Debian GNU/Linux distribution because the
original program does not have a manual page.
Guitune is a linux program for tuning guitars and other instruments by using the method of Schmitt-triggering, i.e. counting the number of
triggerings between two trigger levels in a certain amount of time.
With FFT you need many samples to archieve the accuracy needed for tuning instruments. You often get times of around 1 second between two
measurements and the computer is quite busy in this second calculating the FFT. Using Schmitt-triggering you get a measurement every 10th
of a second or even less (depending on the sample frequency you use). Most of the time the computer only waits for the samples.
The Trigger levels are adjustable. For a pure sine-wave the trigger levels could be zero. But for a wave wth overtones like the one in the
figure above you need a non-zero triggerlevel. It is preadjusted to a level of 60% of the current maximum which should be able to deal with
most instruments.
SEE ALSO
http://www.geocities.com/harpin_floh/kguitune_page.html
Project web page.
AUTHOR
This manual page was written by Antonin Kral <A.Kral@sh.cvut.cz>, for the Debian GNU/Linux system (but may be used by others).
September 06, 2003 WMKBD(1)
I have a huge matrix file containing some 1.5 million rows and 6000 columns. The matrix looks something like this:
1 2 3
4 5 6
7 8 9
3 4 5
I want to add all the numbers in the columns of this matrix and display the result to my stdout. This means that the numbers in the first column are:
... (2 Replies)
Hi,
Just trying to get to grips with sed and awk for some reporting for work and I need some assistance:
I have a file that lists policy names on the first line and then on the second line whether the policy is active or not.
Policy Name: Policy1
Active: yes
Policy... (8 Replies)
version info :
vi availabe with RHEL 5.4
I have a text file with 10,000 lines. I want to copy lines from 5000th line to 7000th and redirect to a file. Any idea how I can do this?
Note:
The above scenario is just an example. In my actual requirement, the file has 14 million lines and I want... (9 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello,
I couldn't find an actual introduction thread, so I decided to just put this here.
I go by d0wngrade online. I have been programming in multiple languages for about 15+ years. I started with standard web design languages like HTML and CSS, but I then advanced from design to development... (2 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Hi.
In thread https://www.unix.com/shell-programming-and-scripting/267833-grouping-counting.html rovf and I had a mini-discussion on grep and awk.
Here is a demo script that compares the awk and grep approaches for this single problem:
#!/usr/bin/env bash
# @(#) s2 Demonstrate group... (1 Reply)
Hello,
I have to fish out some specific columns from a file based on the header value. I have the list of columns I need in a different file. I thought I could read in the list of headers I need,
# file with header names of required columns in required order
headers_file=$2
# read contents... (11 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
I have data of an excel files as given below,
file1
org1_1 1 1 2.5 100
org1_2 1 2 5.5 98
org1_3 1 3 7.2 88
file2
org2_1 1 1 2.5 100
org2_2 1 2 5.5 56
org2_3 1 3 7.2 70
I have multiple excel files as above shown.
I have to copy column 1, column 4 and paste into a new excel file as... (26 Replies)
Dear All,
Taking a break from Vue.js coding for the site, SEO and YT videos; and hopefully addressing some well deserved criticism from some here that I have been too focused on the visual aspects of the forums versus the substance and the community....
While the "current generation... (9 Replies)
Hi all...
Well guys and gals, I jumped in at the deep end and found things that PERL cannot do by default.
Many tricky terminal escape codes are not catered for so I had to create workarounds.
One thing I searched for was this:
Passing perl variable to shell command
AND, @Neo this was... (15 Replies)