debian man page for checkisomd5

CHECKISOMD5(1)						      General Commands Manual						    CHECKISOMD5(1)

NAME
       checkisomd5 -- check an MD5 checksum implanted by implantisomd5

SYNOPSIS
       checkisomd5 [--md5sumonly]  [--verbose]	[--gauge]  [isofilename  | blockdevice ]

DESCRIPTION
       This  manual  page  documents  briefly the checkisomd5 command.	checkisomd5 is a program that checks an embedded MD5 checksum in a ISO9660
       image (.iso), or block device.  The checksum is embedded by the corresponding implantisomd5 command.

       The check can be aborted by pressing Esc key.

EXIT STATUS
       Program returns exit status 0 if the checksum is correct, or 1 if the checksum is incorrect, non-existent, or check was aborted.

OPTIONS
       --md5sumonly
		 Do not check the target.  Instead, output human-readable information about the target's checksums.

       --verbose Display human-readable progress as the target is checked.  Without this option, nothing is outputted except errors.

       --gauge	 Display a series of numbers from 0 to 100, corresponding to check progress.  This output can be piped to  dialog  --gauge  for  a
		 user-friendly progress bar.

SEE ALSO
       implantisomd5 (1).

																    CHECKISOMD5(1)