z8530_sync_close(9) [centos man page]

Z8530_SYNC_CLOSE(9)					     Public Functions Provided					       Z8530_SYNC_CLOSE(9)

NAME

       z8530_sync_close - Close a PIO Z8530 channel

SYNOPSIS

       int z8530_sync_close(struct net_device * dev, struct z8530_channel * c);

ARGUMENTS

       dev
	   Network device to close

       c
	   Z8530 channel to disassociate and move to idle

DESCRIPTION

       Close down a Z8530 interface and switch its interrupt handlers to discard future events.

AUTHOR

       Alan Cox <alan@lxorguk.ukuu.org.uk>
	   Author.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						       Z8530_SYNC_CLOSE(9)

CCW_DEVICE_START_TIM(9) 					    The ccw bus 					   CCW_DEVICE_START_TIM(9)

NAME

       ccw_device_start_timeout - start a s390 channel program with timeout

SYNOPSIS

       int ccw_device_start_timeout(struct ccw_device * cdev, struct ccw1 * cpa, unsigned long intparm, __u8 lpm, unsigned long flags,
				    int expires);

ARGUMENTS

       cdev
	   target ccw device

       cpa
	   logical start address of channel program

       intparm
	   user specific interruption parameter; will be presented back to cdev's interrupt handler. Allows a device driver to associate the
	   interrupt with a particular I/O request.

       lpm
	   defines the channel path to be used for a specific I/O request. A value of 0 will make cio use the opm.

       flags
	   additional flags; defines the action to be performed for I/O processing.

       expires
	   timeout value in jiffies

DESCRIPTION

       Start a S/390 channel program. When the interrupt arrives, the IRQ handler is called, either immediately, delayed (dev-end missing, or
       sense required) or never (no IRQ handler registered). This function notifies the device driver if the channel program has not completed
       during the time specified by expires. If a timeout occurs, the channel program is terminated via xsch, hsch or csch, and the device's
       interrupt handler will be called with an irb containing ERR_PTR(-ETIMEDOUT).

RETURNS

       0, if the operation was successful; -EBUSY, if the device is busy, or status pending; -EACCES, if no path specified in lpm is operational;
       -ENODEV, if the device is not operational.

CONTEXT

       Interrupts disabled, ccw device lock held

AUTHOR

       Cornelia Huck <cornelia.huck@de.ibm.com>
	   Author.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						   CCW_DEVICE_START_TIM(9)