USB_ALTNUM_TO_ALTSET(9) USB Core APIs USB_ALTNUM_TO_ALTSET(9)NAME
usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number.
SYNOPSIS
struct usb_host_interface * usb_altnum_to_altsetting(const struct usb_interface * intf, unsigned int altnum);
ARGUMENTS
intf
the interface containing the altsetting in question
altnum
the desired alternate setting number
DESCRIPTION
This searches the altsetting array of the specified interface for an entry with the correct bAlternateSetting value.
Note that altsettings need not be stored sequentially by number, so it would be incorrect to assume that the first altsetting entry in the
array corresponds to altsetting zero. This routine helps device drivers avoid such mistakes.
Don't call this function unless you are bound to the intf interface or you have locked the device!
RETURN
A pointer to the entry of the altsetting array of intf that has altnum as the alternate setting number. NULL if not found.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 USB_ALTNUM_TO_ALTSET(9)
Check Out this Related Man Page
STRUCT USB_FUNCTION(9) Kernel Mode Gadget API STRUCT USB_FUNCTION(9)NAME
struct_usb_function - describes one function of a configuration
SYNOPSIS
struct usb_function {
const char * name;
struct usb_gadget_strings ** strings;
struct usb_descriptor_header ** fs_descriptors;
struct usb_descriptor_header ** hs_descriptors;
struct usb_descriptor_header ** ss_descriptors;
struct usb_configuration * config;
int (* bind) (struct usb_configuration *,struct usb_function *);
void (* unbind) (struct usb_configuration *,struct usb_function *);
void (* free_func) (struct usb_function *f);
struct module * mod;
int (* set_alt) (struct usb_function *,unsigned interface, unsigned alt);
int (* get_alt) (struct usb_function *,unsigned interface);
void (* disable) (struct usb_function *);
int (* setup) (struct usb_function *,const struct usb_ctrlrequest *);
void (* suspend) (struct usb_function *);
void (* resume) (struct usb_function *);
int (* get_status) (struct usb_function *);
int (* func_suspend) (struct usb_function *,u8 suspend_opt);
};
MEMBERS
name
For diagnostics, identifies the function.
strings
tables of strings, keyed by identifiers assigned during bind and by language IDs provided in control requests
fs_descriptors
Table of full (or low) speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null, the
function will not be available at full speed (or at low speed).
hs_descriptors
Table of high speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null, the function
will not be available at high speed.
ss_descriptors
Table of super speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null after
initiation, the function will not be available at super speed.
config
assigned when usb_add_function() is called; this is the configuration with which this function is associated.
bind
Before the gadget can register, all of its functions bind to the available resources including string and interface identifiers used in
interface or class descriptors; endpoints; I/O buffers; and so on.
unbind
Reverses bind; called as a side effect of unregistering the driver which added this function.
free_func
free the struct usb_function.
mod
(internal) points to the module that created this structure.
set_alt
(REQUIRED) Reconfigures altsettings; function drivers may initialize usb_ep.driver data at this time (when it is used). Note that
setting an interface to its current altsetting resets interface state, and that all interfaces have a disabled state.
get_alt
Returns the active altsetting. If this is not provided, then only altsetting zero is supported.
disable
(REQUIRED) Indicates the function should be disabled. Reasons include host resetting or reconfiguring the gadget, and disconnection.
setup
Used for interface-specific control requests.
suspend
Notifies functions when the host stops sending USB traffic.
resume
Notifies functions when the host restarts USB traffic.
get_status
Returns function status as a reply to GetStatus request when the recepient is Interface.
func_suspend
callback to be called when SetFeature(FUNCTION_SUSPEND) is reseived
DESCRIPTION
A single USB function uses one or more interfaces, and should in most cases support operation at both full and high speeds. Each function
is associated by usb_add_function() with a one configuration; that function causes bind() to be called so resources can be allocated as
part of setting up a gadget driver. Those resources include endpoints, which should be allocated using usb_ep_autoconfig().
To support dual speed operation, a function driver provides descriptors for both high and full speed operation. Except in rare cases that
don't involve bulk endpoints, each speed needs different endpoint descriptors.
Function drivers choose their own strategies for managing instance data. The simplest strategy just declares it "static', which means the
function can only be activated once. If the function needs to be exposed in more than one configuration at a given speed, it needs to
support multiple usb_function structures (one for each configuration).
A more complex strategy might encapsulate a usb_function structure inside a driver-specific instance structure to allows multiple
activations. An example of multiple activations might be a CDC ACM function that supports two or more distinct instances within the same
configuration, providing several independent logical data links to a USB host.
AUTHOR
David Brownell <dbrownell@users.sourceforge.net>
Author.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 STRUCT USB_FUNCTION(9)