regulator_bulk_disable(9) [centos man page]

REGULATOR_BULK_DISAB(9) 					   API reference					   REGULATOR_BULK_DISAB(9)

NAME

       regulator_bulk_disable - disable multiple regulator consumers

SYNOPSIS

       int regulator_bulk_disable(int num_consumers, struct regulator_bulk_data * consumers);

ARGUMENTS

       num_consumers
	   Number of consumers

       consumers
	   Consumer data; clients are stored here.  return 0 on success, an errno on failure

DESCRIPTION

       This convenience API allows consumers to disable multiple regulator clients in a single API call. If any consumers cannot be disabled then
       any others that were disabled will be enabled again prior to return.

AUTHORS

       Liam Girdwood <lrg@slimlogic.co.uk>
	   Author.

       Mark Brown <broonie@opensource.wolfsonmicro.com>
       Wolfson Microelectronics,

	   Author.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						   REGULATOR_BULK_DISAB(9)

STRUCT 
REGULATION_CO(9) 					   API reference					   STRUCT REGULATION_CO(9)

NAME

       struct_regulation_constraints - regulator operating constraints.

SYNOPSIS

       struct regulation_constraints {
	 const char * name;
	 int min_uV;
	 int max_uV;
	 int uV_offset;
	 int min_uA;
	 int max_uA;
	 unsigned int valid_modes_mask;
	 unsigned int valid_ops_mask;
	 int input_uV;
	 struct regulator_state state_disk;
	 struct regulator_state state_mem;
	 struct regulator_state state_standby;
	 suspend_state_t initial_state;
	 unsigned int initial_mode;
	 unsigned int ramp_delay;
	 unsigned always_on:1;
	 unsigned boot_on:1;
	 unsigned apply_uV:1;
       };

MEMBERS

       name
	   Descriptive name for the constraints, used for display purposes.

       min_uV
	   Smallest voltage consumers may set.

       max_uV
	   Largest voltage consumers may set.

       uV_offset
	   Offset applied to voltages from consumer to compensate for voltage drops.

       min_uA
	   Smallest current consumers may set.

       max_uA
	   Largest current consumers may set.

       valid_modes_mask
	   Mask of modes which may be configured by consumers.

       valid_ops_mask
	   Operations which may be performed by consumers.

       input_uV
	   Input voltage for regulator when supplied by another regulator.

       state_disk
	   State for regulator when system is suspended in disk mode.

       state_mem
	   State for regulator when system is suspended in mem mode.

       state_standby
	   State for regulator when system is suspended in standby mode.

       initial_state
	   Suspend state to set by default.

       initial_mode
	   Mode to set at startup.

       ramp_delay
	   Time to settle down after voltage change (unit: uV/us)

       always_on
	   Set if the regulator should never be disabled.

       boot_on
	   Set if the regulator is enabled when the system is initially started. If the regulator is not enabled by the hardware or bootloader
	   then it will be enabled when the constraints are applied.

       apply_uV
	   Apply the voltage constraint when initialising.

DESCRIPTION

       This struct describes regulator and board/machine specific constraints.

AUTHORS

       Liam Girdwood <lrg@slimlogic.co.uk>
	   Author.

       Mark Brown <broonie@opensource.wolfsonmicro.com>
       Wolfson Microelectronics,

	   Author.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						   STRUCT REGULATION_CO(9)