PHY_GET_EEE_ERR(9) Network device support PHY_GET_EEE_ERR(9)NAME
phy_get_eee_err - report the EEE wake error count
int phy_get_eee_err(struct phy_device * phydev);
target phy_device struct
it is to report the number of time where the PHY failed to complete its normal wake sequence.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 PHY_GET_EEE_ERR(9)
Check Out this Related Man Page
PARPORT_REGISTER_DEV(9) Parallel Port Devices PARPORT_REGISTER_DEV(9)NAME
parport_register_device - register a device on a parallel port
struct pardevice * parport_register_device(struct parport * port, const char * name, int (*pf) (void *), void (*kf) (void *),
void (*irq_func) (void *), int flags, void * handle);
port to which the device is attached
a name to refer to the device
kick callback (wake-up)
data for callback functions
This function, called by parallel port device drivers, declares that a device is connected to a port, and tells the system all it needs to
The name is allocated by the caller and must not be deallocated until the caller calls parport_unregister_device for that device.
The preemption callback function, pf, is called when this device driver has claimed access to the port but another device driver wants to
use it. It is given handle as its parameter, and should return zero if it is willing for the system to release the port to another driver
on its behalf. If it wants to keep control of the port it should return non-zero, and no action will be taken. It is good manners for the
driver to try to release the port at the earliest opportunity after its preemption callback rejects a preemption attempt. Note that if a
preemption callback is happy for preemption to go ahead, there is no need to release the port; it is done automatically. This function may
not block, as it may be called from interrupt context. If the device driver does not support preemption, pf can be NULL.
The wake-up ("kick") callback function, kf, is called when the port is available to be claimed for exclusive access; that is, parport_claim
is guaranteed to succeed when called from inside the wake-up callback function. If the driver wants to claim the port it should do so;
otherwise, it need not take any action. This function may not block, as it may be called from interrupt context. If the device driver does
not want to be explicitly invited to claim the port in this way, kf can be NULL.
The interrupt handler, irq_func, is called when an interrupt arrives from the parallel port. Note that if a device driver wants to use
interrupts it should use parport_enable_irq, and can also check the irq member of the parport structure representing the port.
The parallel port (lowlevel) driver is the one that has called request_irq and whose interrupt handler is called first. This handler does
whatever needs to be done to the hardware to acknowledge the interrupt (for PC-style ports there is nothing special to be done). It then
tells the IEEE 1284 code about the interrupt, which may involve reacting to an IEEE 1284 event depending on the current IEEE 1284 phase.
After this, it calls irq_func. Needless to say, irq_func will be called from interrupt context, and may not block.
The PARPORT_DEV_EXCL flag is for preventing port sharing, and so should only be used when sharing the port with other device drivers is
impossible and would lead to incorrect behaviour. Use it sparingly! Normally, flags will be zero.
This function returns a pointer to a structure that represents the device on the port, or NULL if there is not enough memory to allocate
space for that structure.
COPYRIGHT Kernel Hackers Manual 2.6. July 2010 PARPORT_REGISTER_DEV(9)