pci_set_power_state(9) [centos man page]

PCI_SET_POWER_STATE(9)						Hardware Interfaces					    PCI_SET_POWER_STATE(9)

NAME

       pci_set_power_state - Set the power state of a PCI device

SYNOPSIS

       int pci_set_power_state(struct pci_dev * dev, pci_power_t state);

ARGUMENTS

       dev
	   PCI device to handle.

       state
	   PCI power state (D0, D1, D2, D3hot) to put the device into.

DESCRIPTION

       Transition a device to a new power state, using the platform firmware and/or the device's PCI PM registers.

RETURN VALUE

       -EINVAL if the requested state is invalid. -EIO if device does not support PCI PM or its PM capabilities register has a wrong version, or
       device doesn't support the requested state. 0 if device already is in the requested state. 0 if device's power state has been successfully
       changed.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						    PCI_SET_POWER_STATE(9)

PCI(9)							   BSD Kernel Developer's Manual						    PCI(9)

NAME

     pci, pci_read_config, pci_write_config, pci_enable_busmaster, pci_disable_busmaster, pci_enable_io, pci_disable_io, pci_set_powerstate,
     pci_get_powerstate, pci_find_bsf, pci_find_dbsf, pci_find_device -- PCI bus interface

SYNOPSIS

     #include <sys/bus.h>
     #include <dev/pci/pcivar.h>
     #include <dev/pci/pcireg.h>
     #include <machine/pci_cfgreg.h>

     void
     pci_write_config(device_t dev, int reg, uint32_t val, int width);

     int
     pci_enable_busmaster(device_t dev);

     int
     pci_disable_busmaster(device_t dev);

     int
     pci_enable_io(device_t dev, int space);

     int
     pci_disable_io(device_t dev, int space);

     int
     pci_set_powerstate(device_t dev, int state);

     int
     pci_get_powerstate(device_t dev);

     uint32_t
     pci_read_config(device_t dev, int reg, int width);

     device_t
     pci_find_bsf(uint8_t bus, uint8_t slot, uint8_t func);

     device_t
     pci_find_dbsf(uint32_t domain, uint8_t bus, uint8_t slot, uint8_t func);

     device_t
     pci_find_device(uint16_t vendor, uint16_t device);

DESCRIPTION

     The pci set of functions are used for managing PCI devices.

     The pci_read_config() function is used to read data from the PCI configuration space of the device dev, at offset reg, with width specifying
     the size of the access.

     The pci_write_config() function is used to write the value val to the PCI configuration space of the device dev, at offset reg, with width
     specifying the size of the access.

     The pci_enable_busmaster() function enables PCI bus mastering for the device dev, by setting the PCIM_CMD_BUSMASTEREN bit in the PCIR_COMMAND
     register.	The pci_disable_busmaster() function clears this bit.

     The pci_enable_io() function enables memory or I/O port address decoding for the device dev, by setting the PCIM_CMD_MEMEN or PCIM_CMD_PORTEN
     bit in the PCIR_COMMAND register appropriately.  The pci_disable_io() function clears the appropriate bit.  The space argument specifies
     which resource is affected; this can be either SYS_RES_MEMORY or SYS_RES_IOPORT as appropriate.

     NOTE: These functions should be used in preference to manually manipulating the configuration space.

     The pci_get_powerstate() function returns the current ACPI power state of the device dev.	If the device does not support power management
     capabilities, then the default state of PCI_POWERSTATE_D0 is returned.  The following power states are defined by ACPI:

     PCI_POWERSTATE_D0	     State in which device is on and running.  It is receiving full power from the system and delivering full functional-
			     ity to the user.

     PCI_POWERSTATE_D1	     Class-specific low-power state in which device context may or may not be lost.  Busses in this state cannot do any-
			     thing to the bus, to force devices to lose context.

     PCI_POWERSTATE_D2	     Class-specific low-power state in which device context may or may not be lost.  Attains greater power savings than
			     PCI_POWERSTATE_D1.  Busses in this state can cause devices to lose some context.  Devices must be prepared for the
			     bus to be in this state or higher.

     PCI_POWERSTATE_D3	     State in which the device is off and not running.	Device context is lost, and power from the device can be removed.

     PCI_POWERSTATE_UNKNOWN  State of the device is unknown.

     The pci_set_powerstate() function is used to transition the device dev to the ACPI power state state.  It checks to see if the device is PCI
     2.2 compliant.  If so, it checks the capabilities pointer to determine which power states the device supports.  If the device does not have
     power management capabilities, the default state of PCI_POWERSTATE_D0 is set.

     The pci_find_bsf() function looks up the device_t of a PCI device, given its bus, slot, and func.	The slot number actually refers to the
     number of the device on the bus, which does not necessarily indicate its geographic location in terms of a physical slot.	Note that in case
     the system has multiple PCI domains, the pci_find_bsf() function only searches the first one.  Actually, it is equivalent to:

	   pci_find_dbsf(0, bus, slot, func);

     The pci_find_dbsf() function looks up the device_t of a PCI device, given its domain, bus, slot, and func.  The slot number actually refers
     to the number of the device on the bus, which does not necessarily indicate its geographic location in terms of a physical slot.

     The pci_find_device() function looks up the device_t of a PCI device, given its vendor and device IDs.  Note that there can be multiple
     matches for this search; this function only returns the first matching device.

IMPLEMENTATION NOTES

     The pci_addr_t type varies according to the size of the PCI bus address space on the target architecture.

SEE ALSO

     pci(4), pciconf(8), bus_alloc_resource(9), bus_dma(9), bus_release_resource(9), bus_setup_intr(9), bus_teardown_intr(9), devclass(9),
     device(9), driver(9), rman(9)

     "NewBus", FreeBSD Developers' Handbook, http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/developers-handbook/.

     Shanley and Anderson, PCI System Architecture, Addison-Wesley, 2nd Edition, ISBN 0-201-30974-2.

AUTHORS

     This manual page was written by Bruce M Simpson <bms@FreeBSD.org>.

BUGS

     The kernel PCI code has a number of references to ``slot numbers''.  These do not refer to the geographic location of PCI devices, but to the
     device number assigned by the combination of the PCI IDSEL mechanism and the platform firmware.  This should be taken note of when working
     with the kernel PCI code.

BSD
								September 30, 2007							       BSD