pci_reset_bus(9) [centos man page]

PCI_RESET_BUS(9)						Hardware Interfaces						  PCI_RESET_BUS(9)

NAME

       pci_reset_bus - reset a PCI bus

SYNOPSIS

       int pci_reset_bus(struct pci_bus * bus);

ARGUMENTS

       bus
	   top level PCI bus to reset

DESCRIPTION

       Do a bus reset on the given bus and any subordinate buses, saving and restoring state of all devices.

       Return 0 on success, non-zero on error.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014							  PCI_RESET_BUS(9)

I2C_ADD_NUMBERED_ADA(9) 				      I2C and SMBus Subsystem					   I2C_ADD_NUMBERED_ADA(9)

NAME

       i2c_add_numbered_adapter - declare i2c adapter, use static bus number

SYNOPSIS

       int i2c_add_numbered_adapter(struct i2c_adapter * adap);

ARGUMENTS

       adap
	   the adapter to register (with adap->nr initialized)

CONTEXT

       can sleep

DESCRIPTION

       This routine is used to declare an I2C adapter when its bus number matters. For example, use it for I2C adapters from system-on-chip CPUs,
       or otherwise built in to the system's mainboard, and where i2c_board_info is used to properly configure I2C devices.

       If the requested bus number is set to -1, then this function will behave identically to i2c_add_adapter, and will dynamically assign a bus
       number.

       If no devices have pre-been declared for this bus, then be sure to register the adapter before any dynamically allocated ones. Otherwise
       the required bus ID may not be available.

       When this returns zero, the specified adapter became available for clients using the bus number provided in adap->nr. Also, the table of
       I2C devices pre-declared using i2c_register_board_info is scanned, and the appropriate driver model device nodes are created. Otherwise, a
       negative errno value is returned.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						   I2C_ADD_NUMBERED_ADA(9)