PARPORT_REGISTER_DRI(9) Parallel Port Devices PARPORT_REGISTER_DRI(9)NAME
parport_register_driver - register a parallel port device driver
SYNOPSIS
int parport_register_driver(struct parport_driver * drv);
ARGUMENTS
drv
structure describing the driver
DESCRIPTION
This can be called by a parallel port device driver in order to receive notifications about ports being found in the system, as well as
ports no longer available.
The drv structure is allocated by the caller and must not be deallocated until after calling parport_unregister_driver.
The driver's attach function may block. The port that attach is given will be valid for the duration of the callback, but if the driver
wants to take a copy of the pointer it must call parport_get_port to do so. Calling parport_register_device on that port will do this for
you.
The driver's detach function may block. The port that detach is given will be valid for the duration of the callback, but if the driver
wants to take a copy of the pointer it must call parport_get_port to do so.
Returns 0 on success. Currently it always succeeds.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 PARPORT_REGISTER_DRI(9)
Check Out this Related Man Page
PARPORT_REGISTER_POR(9) Parallel Port Devices PARPORT_REGISTER_POR(9)NAME
parport_register_port - register a parallel port
SYNOPSIS
struct parport * parport_register_port(unsigned long base, int irq, int dma, struct parport_operations * ops);
ARGUMENTS
base
base I/O address
irq
IRQ line
dma
DMA channel
ops
pointer to the port driver's port operations structure
DESCRIPTION
When a parallel port (lowlevel) driver finds a port that should be made available to parallel port device drivers, it should call
parport_register_port. The base, irq, and dma parameters are for the convenience of port drivers, and for ports where they aren't
meaningful needn't be set to anything special. They can be altered afterwards by adjusting the relevant members of the parport structure
that is returned and represents the port. They should not be tampered with after calling parport_announce_port, however.
If there are parallel port device drivers in the system that have registered themselves using parport_register_driver, they are not told
about the port at this time; that is done by parport_announce_port.
The ops structure is allocated by the caller, and must not be deallocated before calling parport_remove_port.
If there is no memory to allocate a new parport structure, this function will return NULL.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 PARPORT_REGISTER_POR(9)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
hi all,
i have installed quota on my centos 7 machine and its what im after (setting size limit on users, so they cant fill the hard drive)
i want to now make this part of my create user script for my sftp server so i want to do a echo and a read command so i capture the limit they enter... (0 Replies)
Hi everybody,
Which Unix base OS have best performance for HOST virtualization?
I tested SmartOS but it needs another OS to connect remotely!
Thanks in advance. (11 Replies)
Hi All,
I need to write a shell script which opens a file and increments the version(text) within the file every time the script runs. For example:
$ cat docker_file.yml
version: '3.1'
services:
ui:
image: repo-srv.dev.io:5000/facebook/ui:0.0.2-QA1
$
So, I would like... (6 Replies)
Dear Team
We use DB2 v10.5 and using DBArtisan tool
Can someone please guide how to convert digits to binary numbers using db2 feature.
Ex> for number 9 , binary should be 1001 ( 8+1)
Any help appreciated. Thanks (2 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello... And thanks in advance for any help anyone can offer me
I was trying to work out the differences between displaying modify, access, and change times with the 'ls' command. Everything seems in order when I look at files, but the access time on a directory doesn't seem to change when I... (4 Replies)
Hello everyone,
I am having an issue here with CentOS release 6.6 (Final) that shows all of the space used up, but I can't tell where the space went.
Seemingly I am using up 100%, according to
df -h
Filesystem Size Used Avail Use% Mounted on... (27 Replies)
I'm trying to use a bash script for a psych experiment that involves listening to sound files and responding. If I have something like the code below, how can I make sure that a key press is assigned to RESPONSE only after the second echo statement?
for i in 1 2 3; do
echo "Ready?"
sleep 2
... (10 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)
Dear All,
I am very pleased to announce that Dave Munro (gull04) is joining the Moderation Team, after being a very valuable member of UNIX.com for 15+ years.
Dave is an IT Consultant with 30 years of experience this year, has worked in many of the industry vertical market segments and has... (6 Replies)