NAND_TRANSFER_OOB(9) Internal Functions Provided NAND_TRANSFER_OOB(9)NAME
nand_transfer_oob - [INTERN] Transfer oob to client buffer
SYNOPSIS
uint8_t * nand_transfer_oob(struct nand_chip * chip, uint8_t * oob, struct mtd_oob_ops * ops, size_t len);
ARGUMENTS
chip
nand chip structure
oob
oob destination address
ops
oob ops structure
len
size of oob to transfer
AUTHOR
Thomas Gleixner <tglx@linutronix.de>
Author.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 NAND_TRANSFER_OOB(9)
Check Out this Related Man Page
STRUCT NAND_CHIP(9) Structures STRUCT NAND_CHIP(9)NAME
struct_nand_chip - NAND Private Flash Chip Data
SYNOPSIS
struct nand_chip {
void __iomem * IO_ADDR_R;
void __iomem * IO_ADDR_W;
uint8_t (* read_byte) (struct mtd_info *mtd);
u16 (* read_word) (struct mtd_info *mtd);
void (* write_buf) (struct mtd_info *mtd, const uint8_t *buf, int len);
void (* read_buf) (struct mtd_info *mtd, uint8_t *buf, int len);
void (* select_chip) (struct mtd_info *mtd, int chip);
int (* block_bad) (struct mtd_info *mtd, loff_t ofs, int getchip);
int (* block_markbad) (struct mtd_info *mtd, loff_t ofs);
void (* cmd_ctrl) (struct mtd_info *mtd, int dat, unsigned int ctrl);
int (* init_size) (struct mtd_info *mtd, struct nand_chip *this,u8 *id_data);
int (* dev_ready) (struct mtd_info *mtd);
void (* cmdfunc) (struct mtd_info *mtd, unsigned command, int column,int page_addr);
int(* waitfunc) (struct mtd_info *mtd, struct nand_chip *this);
void (* erase_cmd) (struct mtd_info *mtd, int page);
int (* scan_bbt) (struct mtd_info *mtd);
int (* errstat) (struct mtd_info *mtd, struct nand_chip *this, int state,int status, int page);
int (* write_page) (struct mtd_info *mtd, struct nand_chip *chip,uint32_t offset, int data_len, const uint8_t *buf,int oob_required, int page, int cached, int raw);
int (* onfi_set_features) (struct mtd_info *mtd, struct nand_chip *chip,int feature_addr, uint8_t *subfeature_para);
int (* onfi_get_features) (struct mtd_info *mtd, struct nand_chip *chip,int feature_addr, uint8_t *subfeature_para);
int chip_delay;
unsigned int options;
unsigned int bbt_options;
int page_shift;
int phys_erase_shift;
int bbt_erase_shift;
int chip_shift;
int numchips;
uint64_t chipsize;
int pagemask;
int pagebuf;
unsigned int pagebuf_bitflips;
int subpagesize;
uint8_t cellinfo;
int badblockpos;
int badblockbits;
int onfi_version;
struct nand_onfi_params onfi_params;
flstate_t state;
uint8_t * oob_poi;
struct nand_hw_control * controller;
struct nand_ecclayout * ecclayout;
struct nand_ecc_ctrl ecc;
struct nand_buffers * buffers;
struct nand_hw_control hwcontrol;
uint8_t * bbt;
struct nand_bbt_descr * bbt_td;
struct nand_bbt_descr * bbt_md;
struct nand_bbt_descr * badblock_pattern;
void * priv;
};
MEMBERS
IO_ADDR_R
[BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
IO_ADDR_W
[BOARDSPECIFIC] address to write the 8 I/O lines of the flash device.
read_byte
[REPLACEABLE] read one byte from the chip
read_word
[REPLACEABLE] read one word from the chip
write_buf
[REPLACEABLE] write data from the buffer to the chip
read_buf
[REPLACEABLE] read data from the chip into the buffer
select_chip
[REPLACEABLE] select chip nr
block_bad
[REPLACEABLE] check, if the block is bad
block_markbad
[REPLACEABLE] mark the block bad
cmd_ctrl
[BOARDSPECIFIC] hardwarespecific function for controlling ALE/CLE/nCE. Also used to write command and address
init_size
[BOARDSPECIFIC] hardwarespecific function for setting mtd->oobsize, mtd->writesize and so on. id_data contains the 8 bytes values of
NAND_CMD_READID. Return with the bus width.
dev_ready
[BOARDSPECIFIC] hardwarespecific function for accessing device ready/busy line. If set to NULL no access to ready/busy is available and
the ready/busy information is read from the chip status register.
cmdfunc
[REPLACEABLE] hardwarespecific function for writing commands to the chip.
waitfunc
[REPLACEABLE] hardwarespecific function for wait on ready.
erase_cmd
[INTERN] erase command write function, selectable due to AND support.
scan_bbt
[REPLACEABLE] function to scan bad block table
errstat
[OPTIONAL] hardware specific function to perform additional error status checks (determine if errors are correctable).
write_page
[REPLACEABLE] High-level page write function
onfi_set_features
[REPLACEABLE] set the features for ONFI nand
onfi_get_features
[REPLACEABLE] get the features for ONFI nand
chip_delay
[BOARDSPECIFIC] chip dependent delay for transferring data from array to read regs (tR).
options
[BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about special functionality. See the defines for
further explanation.
bbt_options
[INTERN] bad block specific options. All options used here must come from bbm.h. By default, these options will be copied to the
appropriate nand_bbt_descr's.
page_shift
[INTERN] number of address bits in a page (column address bits).
phys_erase_shift
[INTERN] number of address bits in a physical eraseblock
bbt_erase_shift
[INTERN] number of address bits in a bbt entry
chip_shift
[INTERN] number of address bits in one chip
numchips
[INTERN] number of physical chips
chipsize
[INTERN] the size of one chip for multichip arrays
pagemask
[INTERN] page number mask = number of (pages / chip) - 1
pagebuf
[INTERN] holds the pagenumber which is currently in data_buf.
pagebuf_bitflips
[INTERN] holds the bitflip count for the page which is currently in data_buf.
subpagesize
[INTERN] holds the subpagesize
cellinfo
[INTERN] MLC/multichip data from chip ident
badblockpos
[INTERN] position of the bad block marker in the oob area.
badblockbits
[INTERN] minimum number of set bits in a good block's bad block marker position; i.e., BBM == 11110111b is not bad when badblockbits ==
7
onfi_version
[INTERN] holds the chip ONFI version (BCD encoded), non 0 if ONFI supported.
onfi_params
[INTERN] holds the ONFI page parameter when ONFI is supported, 0 otherwise.
state
[INTERN] the current state of the NAND device
oob_poi
"poison value buffer," used for laying out OOB data before writing
controller
[REPLACEABLE] a pointer to a hardware controller structure which is shared among multiple independent devices.
ecclayout
[REPLACEABLE] the default ECC placement scheme
ecc
[BOARDSPECIFIC] ECC control structure
buffers
buffer structure for read/write
hwcontrol
platform-specific hardware control structure
bbt
[INTERN] bad block table pointer
bbt_td
[REPLACEABLE] bad block table descriptor for flash lookup.
bbt_md
[REPLACEABLE] bad block table mirror descriptor
badblock_pattern
[REPLACEABLE] bad block scan pattern used for initial bad block scan.
priv
[OPTIONAL] pointer to private chip data
AUTHOR
Thomas Gleixner <tglx@linutronix.de>
Author.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 STRUCT NAND_CHIP(9)