mptscsih_taskmgmt_complete(9) [centos man page]

MPTSCSIH_TASKMGMT_CO(9) 				       Message-based devices					   MPTSCSIH_TASKMGMT_CO(9)

NAME

       mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver

SYNOPSIS

       int mptscsih_taskmgmt_complete(MPT_ADAPTER * ioc, MPT_FRAME_HDR * mf, MPT_FRAME_HDR * mr);

ARGUMENTS

       ioc
	   Pointer to MPT_ADAPTER structure

       mf
	   Pointer to SCSI task mgmt request frame

       mr
	   Pointer to SCSI task mgmt reply frame

DESCRIPTION

       This routine is called from mptbase.c::mpt_interrupt at the completion of any SCSI task management request. This routine is registered with
       the MPT (base) driver at driver load/init time via the mpt_register API call.

       Returns 1 indicating alloc'd request frame ptr should be freed.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014						   MPTSCSIH_TASKMGMT_CO(9)

MPT(4)							   BSD Kernel Interfaces Manual 						    MPT(4)

NAME

     mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device mpt

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   mpt_load="YES"

DESCRIPTION

     The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel and SAS controllers.

HARDWARE

     The following controllers are supported by the mpt driver:

     o	 LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
     o	 LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
     o	 LSI Logic FC909 (1Gb/s Fibre Channel)
     o	 LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
     o	 LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
     o	 LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel)
     o	 LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
     o	 LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express)

     The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many systems including:

     o	 Dell PowerEdge 1750 thru 2850
     o	 IBM eServer xSeries 335

     These systems also contain Integrated RAID Mirroring and Integrated RAID Mirroring Enhanced which this driver also supports.

     The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100.  Note that this controller can drive both
     SAS and SATA drives or a mix of them at the same time. The Integrated RAID Mirroring available for these controllers is poorly supported at
     best.

     The Fibre Channel controller chipset are supported by a broad variety of speeds and systems.  The Apple Fibre Channel HBA is in fact the
     FC949ES card.

     This driver also supports target mode for Fibre Channel cards.  This support may be enabled by setting the desired role of the core via the
     LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required.

SEE ALSO

     cd(4), ch(4), da(4), mps(4), pci(4), sa(4), scsi(4), targ(4), gmultipath(8), mptutil(8)

     LSI Logic Website, http://www.lsi.com/.

HISTORY

     The mpt driver first appeared in FreeBSD 4.6.

AUTHORS

     The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved upon by Matt Jacob <mjacob@FreeBSD.org>.

     Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more substantial improvements.

BSD
								   July 23, 2011							       BSD