MPT_GET_MSG_FRAME(9) Message-based devices MPT_GET_MSG_FRAME(9)NAME
mpt_get_msg_frame - Obtain an MPT request frame from the pool
SYNOPSIS
MPT_FRAME_HDR* mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER * ioc);
ARGUMENTS
cb_idx
Handle of registered MPT protocol driver
ioc
Pointer to MPT adapter structure
DESCRIPTION
Obtain an MPT request frame from the pool (of 1024) that are allocated per MPT adapter.
Returns pointer to a MPT request frame or NULL if none are available or IOC is not active.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 MPT_GET_MSG_FRAME(9)
Check Out this Related Man Page
MPT(4) BSD Kernel Interfaces Manual MPT(4)NAME
mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device scbus
device mpt
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
mpt_load="YES"
DESCRIPTION
The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel and SAS controllers.
HARDWARE
The following controllers are supported by the mpt driver:
o LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
o LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
o LSI Logic FC909 (1Gb/s Fibre Channel)
o LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
o LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
o LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel)
o LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
o LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express)
The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many systems including:
o Dell PowerEdge 1750 thru 2850
o IBM eServer xSeries 335
These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports.
The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100. Note that this controller can drive both
SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at
best.
The Fibre Channel controller chipset are supported by a broad variety of speeds and systems. The Apple Fibre Channel HBA is in fact the
FC949ES card.
This driver also supports target mode for Fibre Channel cards. This support may be enabled by setting the desired role of the core via the
LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required.
SEE ALSO cd(4), ch(4), da(4), pci(4), sa(4), scsi(4), targ(4), mptutil(8), gmultipath(8)
LSI Logic Website, http://www.lsilogic.com/.
HISTORY
The mpt driver first appeared in FreeBSD 4.6.
AUTHORS
The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved upon by Matt Jacob <mjacob@FreeBSD.org>.
Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more substantial improvements.
BUGS BSD May 13, 2010 BSD
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
hi all,
i have installed quota on my centos 7 machine and its what im after (setting size limit on users, so they cant fill the hard drive)
i want to now make this part of my create user script for my sftp server so i want to do a echo and a read command so i capture the limit they enter... (0 Replies)
Hi everybody,
Which Unix base OS have best performance for HOST virtualization?
I tested SmartOS but it needs another OS to connect remotely!
Thanks in advance. (11 Replies)
Hi All,
I need to write a shell script which opens a file and increments the version(text) within the file every time the script runs. For example:
$ cat docker_file.yml
version: '3.1'
services:
ui:
image: repo-srv.dev.io:5000/facebook/ui:0.0.2-QA1
$
So, I would like... (6 Replies)
Dear Team
We use DB2 v10.5 and using DBArtisan tool
Can someone please guide how to convert digits to binary numbers using db2 feature.
Ex> for number 9 , binary should be 1001 ( 8+1)
Any help appreciated. Thanks (2 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello... And thanks in advance for any help anyone can offer me
I was trying to work out the differences between displaying modify, access, and change times with the 'ls' command. Everything seems in order when I look at files, but the access time on a directory doesn't seem to change when I... (4 Replies)
Hello everyone,
I am having an issue here with CentOS release 6.6 (Final) that shows all of the space used up, but I can't tell where the space went.
Seemingly I am using up 100%, according to
df -h
Filesystem Size Used Avail Use% Mounted on... (27 Replies)
I'm trying to use a bash script for a psych experiment that involves listening to sound files and responding. If I have something like the code below, how can I make sure that a key press is assigned to RESPONSE only after the second echo statement?
for i in 1 2 3; do
echo "Ready?"
sleep 2
... (10 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)
Dear All,
I am very pleased to announce that Dave Munro (gull04) is joining the Moderation Team, after being a very valuable member of UNIX.com for 15+ years.
Dave is an IT Consultant with 30 years of experience this year, has worked in many of the industry vertical market segments and has... (6 Replies)