i2c_master_send(9) [centos man page]

I2C_MASTER_SEND(9)					      I2C and SMBus Subsystem						I2C_MASTER_SEND(9)

NAME

       i2c_master_send - issue a single I2C message in master transmit mode

SYNOPSIS

       int i2c_master_send(const struct i2c_client * client, const char * buf, int count);

ARGUMENTS

       client
	   Handle to slave device

       buf
	   Data that will be written to the slave

       count
	   How many bytes to write, must be less than 64k since msg.len is u16

DESCRIPTION

       Returns negative errno, or else the number of bytes written.

COPYRIGHT

Kernel Hackers Manual 3.10					     June 2014							I2C_MASTER_SEND(9)

STRUCT 
I2C_MSG(9)					      I2C and SMBus Subsystem						 STRUCT I2C_MSG(9)

NAME

       struct_i2c_msg - an I2C transaction segment beginning with START

SYNOPSIS

       struct i2c_msg {
	 __u16 addr;
	 __u16 flags;
       #define I2C_M_TEN	0x0010
       #define I2C_M_RD 	0x0001
       #define I2C_M_NOSTART	     0x4000
       #define I2C_M_REV_DIR_ADDR    0x2000
       #define I2C_M_IGNORE_NAK 0x1000
       #define I2C_M_NO_RD_ACK	     0x0800
       #define I2C_M_RECV_LEN	     0x0400
	 __u16 len;
	 __u8 * buf;
       };

MEMBERS

       addr
	   Slave address, either seven or ten bits. When this is a ten bit address, I2C_M_TEN must be set in flags and the adapter must support
	   I2C_FUNC_10BIT_ADDR.

       flags
	   I2C_M_RD is handled by all adapters. No other flags may be provided unless the adapter exported the relevant I2C_FUNC_* flags through
	   i2c_check_functionality.

       len
	   Number of data bytes in buf being read from or written to the I2C slave address. For read transactions where I2C_M_RECV_LEN is set, the
	   caller guarantees that this buffer can hold up to 32 bytes in addition to the initial length byte sent by the slave (plus, if used, the
	   SMBus PEC); and this value will be incremented by the number of block data bytes received.

       buf
	   The buffer into which data is read, or from which it's written.

DESCRIPTION

       An i2c_msg is the low level representation of one segment of an I2C transaction. It is visible to drivers in the i2c_transfer() procedure,
       to userspace from i2c-dev, and to I2C adapter drivers through the i2c_adapter.master_xfer() method.

       Except when I2C "protocol mangling" is used, all I2C adapters implement the standard rules for I2C transactions. Each transaction begins
       with a START. That is followed by the slave address, and a bit encoding read versus write. Then follow all the data bytes, possibly
       including a byte with SMBus PEC. The transfer terminates with a NAK, or when all those bytes have been transferred and ACKed. If this is
       the last message in a group, it is followed by a STOP. Otherwise it is followed by the next i2c_msg transaction segment, beginning with a
       (repeated) START.

       Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then passing certain flags may have changed those standard protocol
       behaviors. Those flags are only for use with broken/nonconforming slaves, and with adapters which are known to support the specific
       mangling options they need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).

COPYRIGHT

Kernel Hackers Manual 2.6.					     July 2010							 STRUCT I2C_MSG(9)