FB_SET_SUSPEND(9) Frame Buffer Library FB_SET_SUSPEND(9)NAME
fb_set_suspend - low level driver signals suspend
SYNOPSIS
void fb_set_suspend(struct fb_info * info, int state);
ARGUMENTS
info
framebuffer affected
state
0 = resuming, !=0 = suspending
DESCRIPTION
This is meant to be used by low level drivers to signal suspend/resume to the core & clients. It must be called with the console semaphore
held
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 FB_SET_SUSPEND(9)
Check Out this Related Man Page
STRUCT SPI_DRIVER(9) Serial Peripheral Interface (S STRUCT SPI_DRIVER(9)NAME
struct_spi_driver - Host side "protocol" driver
SYNOPSIS
struct spi_driver {
const struct spi_device_id * id_table;
int (* probe) (struct spi_device *spi);
int (* remove) (struct spi_device *spi);
void (* shutdown) (struct spi_device *spi);
int (* suspend) (struct spi_device *spi, pm_message_t mesg);
int (* resume) (struct spi_device *spi);
struct device_driver driver;
};
MEMBERS
id_table
List of SPI devices supported by this driver
probe
Binds this driver to the spi device. Drivers can verify that the device is actually present, and may need to configure characteristics
(such as bits_per_word) which weren't needed for the initial configuration done during system setup.
remove
Unbinds this driver from the spi device
shutdown
Standard shutdown callback used during system state transitions such as powerdown/halt and kexec
suspend
Standard suspend callback used during system state transitions
resume
Standard resume callback used during system state transitions
driver
SPI device drivers should initialize the name and owner field of this structure.
DESCRIPTION
This represents the kind of device driver that uses SPI messages to interact with the hardware at the other end of a SPI link. It's called
a "protocol" driver because it works through messages rather than talking directly to SPI hardware (which is what the underlying SPI
controller driver does to pass those messages). These protocols are defined in the specification for the device(s) supported by the driver.
As a rule, those device protocols represent the lowest level interface supported by a driver, and it will support upper level interfaces
too. Examples of such upper levels include frameworks like MTD, networking, MMC, RTC, filesystem character device nodes, and hardware
monitoring.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 STRUCT SPI_DRIVER(9)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
hi all,
i have installed quota on my centos 7 machine and its what im after (setting size limit on users, so they cant fill the hard drive)
i want to now make this part of my create user script for my sftp server so i want to do a echo and a read command so i capture the limit they enter... (0 Replies)
Hi everybody,
Which Unix base OS have best performance for HOST virtualization?
I tested SmartOS but it needs another OS to connect remotely!
Thanks in advance. (11 Replies)
Hi All,
I need to write a shell script which opens a file and increments the version(text) within the file every time the script runs. For example:
$ cat docker_file.yml
version: '3.1'
services:
ui:
image: repo-srv.dev.io:5000/facebook/ui:0.0.2-QA1
$
So, I would like... (6 Replies)
Dear Team
We use DB2 v10.5 and using DBArtisan tool
Can someone please guide how to convert digits to binary numbers using db2 feature.
Ex> for number 9 , binary should be 1001 ( 8+1)
Any help appreciated. Thanks (2 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello... And thanks in advance for any help anyone can offer me
I was trying to work out the differences between displaying modify, access, and change times with the 'ls' command. Everything seems in order when I look at files, but the access time on a directory doesn't seem to change when I... (4 Replies)
Hello everyone,
I am having an issue here with CentOS release 6.6 (Final) that shows all of the space used up, but I can't tell where the space went.
Seemingly I am using up 100%, according to
df -h
Filesystem Size Used Avail Use% Mounted on... (27 Replies)
I'm trying to use a bash script for a psych experiment that involves listening to sound files and responding. If I have something like the code below, how can I make sure that a key press is assigned to RESPONSE only after the second echo statement?
for i in 1 2 3; do
echo "Ready?"
sleep 2
... (10 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)
Dear All,
I am very pleased to announce that Dave Munro (gull04) is joining the Moderation Team, after being a very valuable member of UNIX.com for 15+ years.
Dave is an IT Consultant with 30 years of experience this year, has worked in many of the industry vertical market segments and has... (6 Replies)