SUDO(8) BSD System Manager's Manual SUDO(8)
sudo, sudoedit -- execute a command as another user
sudo -h | -K | -k | -V
sudo -v [-AknS] [-g group name | #gid] [-p prompt] [-u user name | #uid]
sudo -l[l] [-AknS] [-g group name | #gid] [-p prompt] [-U user name] [-u user name | #uid] [command]
sudo [-AbEHnPS] [-C fd] [-g group name | #gid] [-p prompt] [-r role] [-t type] [-u user name | #uid] [VAR=value] -i | -s [command]
sudoedit [-AnS] [-C fd] [-g group name | #gid] [-p prompt] [-u user name | #uid] file ...
sudo allows a permitted user to execute a command as the superuser or another user, as specified by the security policy.
sudo supports a plugin architecture for security policies and input/output logging. Third parties can develop and distribute their own pol-
icy and I/O logging plugins to work seamlessly with the sudo front end. The default security policy is sudoers, which is configured via the
file /etc/sudoers, or via LDAP. See the PLUGINS section for more information.
The security policy determines what privileges, if any, a user has to run sudo. The policy may require that users authenticate themselves
with a password or another authentication mechanism. If authentication is required, sudo will exit if the user's password is not entered
within a configurable time limit. This limit is policy-specific; the default password prompt timeout for the sudoers security policy is 5
Security policies may support credential caching to allow the user to run sudo again for a period of time without requiring authentication.
The sudoers policy caches credentials for 5 minutes, unless overridden in sudoers(5). By running sudo with the -v option, a user can update
the cached credentials without running a command.
When invoked as sudoedit, the -e option (described below), is implied.
Security policies may log successful and failed attempts to use sudo. If an I/O plugin is configured, the running command's input and output
may be logged as well.
The options are as follows:
-A Normally, if sudo requires a password, it will read it from the user's terminal. If the -A (askpass) option is specified, a
(possibly graphical) helper program is executed to read the user's password and output the password to the standard output. If
the SUDO_ASKPASS environment variable is set, it specifies the path to the helper program. Otherwise, if /etc/sudo.conf contains
a line specifying the askpass program, that value will be used. For example:
# Path to askpass helper program
Path askpass /usr/X11R6/bin/ssh-askpass
If no askpass program is available, sudo will exit with an error.
-b The -b (background) option tells sudo to run the given command in the background. Note that if you use the -b option you cannot
use shell job control to manipulate the process. Most interactive commands will fail to work properly in background mode.
-C fd Normally, sudo will close all open file descriptors other than standard input, standard output and standard error. The -C (close
from) option allows the user to specify a starting point above the standard error (file descriptor three). Values less than
three are not permitted. The security policy may restrict the user's ability to use the -C option. The sudoers policy only per-
mits use of the -C option when the administrator has enabled the closefrom_override option.
-E The -E (preserve environment) option indicates to the security policy that the user wishes to preserve their existing environment
variables. The security policy may return an error if the -E option is specified and the user does not have permission to pre-
serve the environment.
-e The -e (edit) option indicates that, instead of running a command, the user wishes to edit one or more files. In lieu of a com-
mand, the string "sudoedit" is used when consulting the security policy. If the user is authorized by the policy, the following
steps are taken:
1. Temporary copies are made of the files to be edited with the owner set to the invoking user.
2. The editor specified by the policy is run to edit the temporary files. The sudoers policy uses the SUDO_EDITOR, VISUAL and
EDITOR environment variables (in that order). If none of SUDO_EDITOR, VISUAL or EDITOR are set, the first program listed in
the editor sudoers(5) option is used.
3. If they have been modified, the temporary files are copied back to their original location and the temporary versions are
If the specified file does not exist, it will be created. Note that unlike most commands run by sudo, the editor is run with the
invoking user's environment unmodified. If, for some reason, sudo is unable to update a file with its edited version, the user
will receive a warning and the edited copy will remain in a temporary file.
-g group Normally, sudo runs a command with the primary group set to the one specified by the password database for the user the command
is being run as (by default, root). The -g (group) option causes sudo to run the command with the primary group set to group
instead. To specify a gid instead of a group name, use #gid. When running commands as a gid, many shells require that the '#'
be escaped with a backslash (''). If no -u option is specified, the command will be run as the invoking user (not root). In
either case, the primary group will be set to group.
-H The -H (HOME) option requests that the security policy set the HOME environment variable to the home directory of the target user
(root by default) as specified by the password database. Depending on the policy, this may be the default behavior.
-h The -h (help) option causes sudo to print a short help message to the standard output and exit.
The -i (simulate initial login) option runs the shell specified by the password database entry of the target user as a login
shell. This means that login-specific resource files such as .profile or .login will be read by the shell. If a command is
specified, it is passed to the shell for execution via the shell's -c option. If no command is specified, an interactive shell
is executed. sudo attempts to change to that user's home directory before running the shell. The security policy shall initial-
ize the environment to a minimal set of variables, similar to what is present when a user logs in. The Command Environment sec-
tion in the sudoers(5) manual documents how the -i option affects the environment in which a command is run when the sudoers pol-
icy is in use.
-K The -K (sure kill) option is like -k except that it removes the user's cached credentials entirely and may not be used in con-
junction with a command or other option. This option does not require a password. Not all security policies support credential
When used alone, the -k (kill) option to sudo invalidates the user's cached credentials. The next time sudo is run a password
will be required. This option does not require a password and was added to allow a user to revoke sudo permissions from a
.logout file. Not all security policies support credential caching.
When used in conjunction with a command or an option that may require a password, the -k option will cause sudo to ignore the
user's cached credentials. As a result, sudo will prompt for a password (if one is required by the security policy) and will not
update the user's cached credentials.
If no command is specified, the -l (list) option will list the allowed (and forbidden) commands for the invoking user (or the
user specified by the -U option) on the current host. If a command is specified and is permitted by the security policy, the
fully-qualified path to the command is displayed along with any command line arguments. If command is specified but not allowed,
sudo will exit with a status value of 1. If the -l option is specified with an l argument (i.e. -ll), or if -l is specified mul-
tiple times, a longer list format is used.
-n The -n (non-interactive) option prevents sudo from prompting the user for a password. If a password is required for the command
to run, sudo will display an error message and exit.
-P The -P (preserve group vector) option causes sudo to preserve the invoking user's group vector unaltered. By default, the
sudoers policy will initialize the group vector to the list of groups the target user is in. The real and effective group IDs,
however, are still set to match the target user.
-p prompt The -p (prompt) option allows you to override the default password prompt and use a custom one. The following percent ('%')
escapes are supported by the sudoers policy:
%H expanded to the host name including the domain name (on if the machine's host name is fully qualified or the fqdn option is
set in sudoers(5))
%h expanded to the local host name without the domain name
%p expanded to the name of the user whose password is being requested (respects the rootpw, targetpw, and runaspw flags in
%U expanded to the login name of the user the command will be run as (defaults to root unless the -u option is also specified)
%u expanded to the invoking user's login name
%% two consecutive '%' characters are collapsed into a single '%' character
The prompt specified by the -p option will override the system password prompt on systems that support PAM unless the
passprompt_override flag is disabled in sudoers.
-r role The -r (role) option causes the new (SELinux) security context to have the role specified by role.
-S The -S (stdin) option causes sudo to read the password from the standard input instead of the terminal device. The password must
be followed by a newline character.
The -s (shell) option runs the shell specified by the SHELL environment variable if it is set or the shell as specified in the
password database. If a command is specified, it is passed to the shell for execution via the shell's -c option. If no command
is specified, an interactive shell is executed.
-t type The -t (type) option causes the new (SELinux) security context to have the type specified by type. If no type is specified, the
default type is derived from the specified role.
-U user The -U (other user) option is used in conjunction with the -l option to specify the user whose privileges should be listed. The
security policy may restrict listing other users' privileges. The sudoers policy only allows root or a user with the ALL privi-
lege on the current host to use this option.
-u user The -u (user) option causes sudo to run the specified command as a user other than root. To specify a uid instead of a user
name, #uid. When running commands as a uid, many shells require that the '#' be escaped with a backslash (''). Security poli-
cies may restrict uids to those listed in the password database. The sudoers policy allows uids that are not in the password
database as long as the targetpw option is not set. Other security policies may not support this.
-V The -V (version) option causes sudo to print its version string and the version string of the security policy plugin and any I/O
plugins. If the invoking user is already root the -V option will display the arguments passed to configure when sudo was built
and plugins may display more verbose information such as default options.
-v When given the -v (validate) option, sudo will update the user's cached credentials, authenticating the user's password if neces-
sary. For the sudoers plugin, this extends the sudo timeout for another 5 minutes (or whatever the timeout is set to by the
security policy) but does not run a command. Not all security policies support cached credentials.
-- The -- option indicates that sudo should stop processing command line arguments.
Environment variables to be set for the command may also be passed on the command line in the form of VAR=value, e.g.
LD_LIBRARY_PATH=/usr/local/pkg/lib. Variables passed on the command line are subject to the same restrictions as normal environment vari-
ables with one important exception. If the setenv option is set in sudoers, the command to be run has the SETENV tag set or the command
matched is ALL, the user may set variables that would otherwise be forbidden. See sudoers(5) for more information.
When sudo executes a command, the security policy specifies the execution envionment for the command. Typically, the real and effective uid
and gid are set to match those of the target user, as specified in the password database, and the group vector is initialized based on the
group database (unless the -P option was specified).
The following parameters may be specified by security policy:
o real and effective user ID
o real and effective group ID
o supplementary group IDs
o the environment list
o current working directory
o file creation mode mask (umask)
o SELinux role and type
o scheduling priority (aka nice value)
When sudo runs a command, it calls fork(2), sets up the execution environment as described above, and calls the execve system call in the
child process. The main sudo process waits until the command has completed, then passes the command's exit status to the security policy's
close method and exits. If an I/O logging plugin is configured, a new pseudo-terminal (``pty'') is created and a second sudo process is
used to relay job control signals between the user's existing pty and the new pty the command is being run in. This extra process makes it
possible to, for example, suspend and resume the command. Without it, the command would be in what POSIX terms an ``orphaned process group''
and it would not receive any job control signals.
Because the command is run as a child of the sudo process, sudo will relay signals it receives to the command. Unless the command is being
run in a new pty, the SIGHUP, SIGINT and SIGQUIT signals are not relayed unless they are sent by a user process, not the kernel. Otherwise,
the command would receive SIGINT twice every time the user entered control-C. Some signals, such as SIGSTOP and SIGKILL, cannot be caught
and thus will not be relayed to the command. As a general rule, SIGTSTP should be used instead of SIGSTOP when you wish to suspend a command
being run by sudo.
As a special case, sudo will not relay signals that were sent by the command it is running. This prevents the command from accidentally
killing itself. On some systems, the reboot(8) command sends SIGTERM to all non-system processes other than itself before rebooting the
systyem. This prevents sudo from relaying the SIGTERM signal it received back to reboot(8), which might then exit before the system was
actually rebooted, leaving it in a half-dead state similar to single user mode. Note, however, that this check only applies to the command
run by sudo and not any other processes that the command may create. As a result, running a script that calls reboot(8) or shutdown(8) via
sudo may cause the system to end up in this undefined state unless the reboot(8) or shutdown(8) are run using the exec() family of functions
instead of system() (which interposes a shell between the command and the calling process).
Plugins are dynamically loaded based on the contents of the /etc/sudo.conf file. If no /etc/sudo.conf file is present, or it contains no
Plugin lines, sudo will use the traditional sudoers security policy and I/O logging, which corresponds to the following /etc/sudo.conf file.
# Default /etc/sudo.conf file
# Plugin plugin_name plugin_path plugin_options ...
# Path askpass /path/to/askpass
# Path noexec /path/to/sudo_noexec.so
# Debug sudo /var/log/sudo_debug all@warn
# Set disable_coredump true
# The plugin_path is relative to /usr/libexec unless
# fully qualified.
# The plugin_name corresponds to a global symbol in the plugin
# that contains the plugin interface structure.
# The plugin_options are optional.
Plugin policy_plugin sudoers.so
Plugin io_plugin sudoers.so
A Plugin line consists of the Plugin keyword, followed by the symbol_name and the path to the shared object containing the plugin. The
symbol_name is the name of the struct policy_plugin or struct io_plugin in the plugin shared object. The path may be fully qualified or rel-
ative. If not fully qualified it is relative to the /usr/libexec directory. Any additional parameters after the path are passed as argu-
ments to the plugin's open function. Lines that don't begin with Plugin, Path, Debug, or Set are silently ignored.
For more information, see the sudo_plugin(8) manual.
A Path line consists of the Path keyword, followed by the name of the path to set and its value. E.g.
Path noexec /usr/libexec/sudo_noexec.so
Path askpass /usr/X11R6/bin/ssh-askpass
The following plugin-agnostic paths may be set in the /etc/sudo.conf file:
askpass The fully qualified path to a helper program used to read the user's password when no terminal is available. This may be the case
when sudo is executed from a graphical (as opposed to text-based) application. The program specified by askpass should display the
argument passed to it as the prompt and write the user's password to the standard output. The value of askpass may be overridden
by the SUDO_ASKPASS environment variable.
noexec The fully-qualified path to a shared library containing dummy versions of the execv(), execve() and fexecve() library functions
that just return an error. This is used to implement the noexec functionality on systems that support LD_PRELOAD or its equiva-
lent. Defaults to /usr/libexec/sudo_noexec.so.
sudo versions 1.8.4 and higher support a flexible debugging framework that can help track down what sudo is doing internally if there is a
A Debug line consists of the Debug keyword, followed by the name of the program to debug (sudo, visudo, sudoreplay), the debug file name and
a comma-separated list of debug flags. The debug flag syntax used by sudo and the sudoers plugin is subsystem@priority but the plugin is
free to use a different format so long as it does not include a comma (',').
Debug sudo /var/log/sudo_debug all@warn,plugin@info
would log all debugging statements at the warn level and higher in addition to those at the info level for the plugin subsystem.
Currently, only one Debug entry per program is supported. The sudo Debug entry is shared by the sudo front end, sudoedit and the plugins. A
future release may add support for per-plugin Debug lines and/or support for multiple debugging files for a single program.
The priorities used by the sudo front end, in order of decreasing severity, are: crit, err, warn, notice, diag, info, trace and debug. Each
priority, when specified, also includes all priorities higher than it. For example, a priority of notice would include debug messages logged
at notice and higher.
The following subsystems are used by the sudo front-end:
all matches every subsystem
args command line argument processing
conv user conversation
exec command execution
main sudo main function
netif network interface handling
pcomm communication with the plugin
plugin plugin configuration
pty pseudo-tty related code
selinux SELinux-specific handling
util utility functions
utmp utmp handling
Upon successful execution of a program, the exit status from sudo will simply be the exit status of the program that was executed.
Otherwise, sudo exits with a value of 1 if there is a configuration/permission problem or if sudo cannot execute the given command. In the
latter case the error string is printed to the standard error. If sudo cannot stat(2) one or more entries in the user's PATH, an error is
printed on stderr. (If the directory does not exist or if it is not really a directory, the entry is ignored and no error is printed.) This
should not happen under normal circumstances. The most common reason for stat(2) to return ``permission denied'' is if you are running an
automounter and one of the directories in your PATH is on a machine that is currently unreachable.
sudo tries to be safe when executing external commands.
To prevent command spoofing, sudo checks "." and "" (both denoting current directory) last when searching for a command in the user's PATH
(if one or both are in the PATH). Note, however, that the actual PATH environment variable is not modified and is passed unchanged to the
program that sudo executes.
Please note that sudo will normally only log the command it explicitly runs. If a user runs a command such as sudo su or sudo sh, subsequent
commands run from that shell are not subject to sudo's security policy. The same is true for commands that offer shell escapes (including
most editors). If I/O logging is enabled, subsequent commands will have their input and/or output logged, but there will not be traditional
logs for those commands. Because of this, care must be taken when giving users access to commands via sudo to verify that the command does
not inadvertently give the user an effective root shell. For more information, please see the PREVENTING SHELL ESCAPES section in
To prevent the disclosure of potentially sensitive information, sudo disables core dumps by default while it is executing (they are re-
enabled for the command that is run). To aid in debugging sudo crashes, you may wish to re-enable core dumps by setting ``disable_coredump''
to false in the /etc/sudo.conf file as follows:
Set disable_coredump false
Note that by default, most operating systems disable core dumps from setuid programs, which includes sudo. To actually get a sudo core file
you may need to enable core dumps for setuid processes. On BSD and Linux systems this is accomplished via the sysctl command, on Solaris the
coreadm command can be used.
sudo utilizes the following environment variables. The security policy has control over the actual content of the command's environment.
EDITOR Default editor to use in -e (sudoedit) mode if neither SUDO_EDITOR nor VISUAL is set.
MAIL In -i mode or when env_reset is enabled in sudoers, set to the mail spool of the target user.
HOME Set to the home directory of the target user if -i or -H are specified, env_reset or always_set_home are set in sudoers, or
when the -s option is specified and set_home is set in sudoers.
PATH May be overridden by the security policy.
SHELL Used to determine shell to run with -s option.
SUDO_ASKPASS Specifies the path to a helper program used to read the password if no terminal is available or if the -A option is speci-
SUDO_COMMAND Set to the command run by sudo.
SUDO_EDITOR Default editor to use in -e (sudoedit) mode.
SUDO_GID Set to the group ID of the user who invoked sudo.
SUDO_PROMPT Used as the default password prompt.
SUDO_PS1 If set, PS1 will be set to its value for the program being run.
SUDO_UID Set to the user ID of the user who invoked sudo.
SUDO_USER Set to the login name of the user who invoked sudo.
USER Set to the target user (root unless the -u option is specified).
VISUAL Default editor to use in -e (sudoedit) mode if SUDO_EDITOR is not set.
/etc/sudo.conf sudo front end configuration
Note: the following examples assume a properly configured security policy.
To get a file listing of an unreadable directory:
$ sudo ls /usr/local/protected
To list the home directory of user yaz on a machine where the file system holding ~yaz is not exported as root:
$ sudo -u yaz ls ~yaz
To edit the index.html file as user www:
$ sudo -u www vi ~www/htdocs/index.html
To view system logs only accessible to root and users in the adm group:
$ sudo -g adm view /var/log/syslog
To run an editor as jim with a different primary group:
$ sudo -u jim -g audio vi ~jim/sound.txt
To shut down a machine:
$ sudo shutdown -r +15 "quick reboot"
To make a usage listing of the directories in the /home partition. Note that this runs the commands in a sub-shell to make the cd and file
$ sudo sh -c "cd /home ; du -s * | sort -rn > USAGE"
grep(1), su(1), stat(2), passwd(5), sudoers(5), sudo_plugin(8), sudoreplay(8), visudo(8)
See the HISTORY file in the sudo distribution (http://www.sudo.ws/sudo/history.html) for a brief history of sudo.
Many people have worked on sudo over the years; this version consists of code written primarily by:
Todd C. Miller
See the CONTRIBUTORS file in the sudo distribution (http://www.sudo.ws/sudo/contributors.html) for an exhaustive list of people who have con-
tributed to sudo.
There is no easy way to prevent a user from gaining a root shell if that user is allowed to run arbitrary commands via sudo. Also, many pro-
grams (such as editors) allow the user to run commands via shell escapes, thus avoiding sudo's checks. However, on most systems it is possi-
ble to prevent shell escapes with the sudoers(5) plugin's noexec functionality.
It is not meaningful to run the cd command directly via sudo, e.g.,
$ sudo cd /usr/local/protected
since when the command exits the parent process (your shell) will still be the same. Please see the EXAMPLES section for more information.
Running shell scripts via sudo can expose the same kernel bugs that make setuid shell scripts unsafe on some operating systems (if your OS
has a /dev/fd/ directory, setuid shell scripts are generally safe).
If you feel you have found a bug in sudo, please submit a bug report at http://www.sudo.ws/sudo/bugs/
Limited free support is available via the sudo-users mailing list, see http://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search
sudo is provided ``AS IS'' and any express or implied warranties, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose are disclaimed. See the LICENSE file distributed with sudo or http://www.sudo.ws/sudo/license.html for
Sudo 1.8.6p7 July 10, 2012 Sudo 1.8.6p7