Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

fence_ipmilan(8) [centos man page]

FENCE_AGENT(8)						      System Manager's Manual						    FENCE_AGENT(8)

NAME
fence_ipmilan - Fence agent for IPMI over LAN fence_ilo3 - Fence agent for HP iLO3 (symlink) fence_ilo4 - Fence agent for HP iLO4 (symlink) fence_idrac - Fence agent for Dell iDRAC (symlink) fence_imm - Fence agent for IBM Integrated Management Module (symlink) DESCRIPTION
fence_ipmilan is an I/O Fencing agent which can be used with machines controlled by IPMI. This agent calls support software using ipmitool (http://ipmitool.sf.net/). To use fence_ipmilan with HP iLO 3 or HP iLO 4 you have to enable lanplus option (lanplus / -P) and increase wait after operation to 4 sec- onds (power_wait=4 / -T 4) fence_ipmilan accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ipmilan can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.intel.com PARAMETERS
-A IPMI Lan Auth type (md5, password, or none) -a IPMI Lan IP to talk to This parameter is always required. -p Password (if required) to control power on IPMI device -S Script to retrieve password (if required) -P Use Lanplus to improve security of connection -l Username/Login (if required) to control power on IPMI device -o Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) -t Timeout (sec) for IPMI operation -C Ciphersuite to use (same as ipmitool -C parameter) -M Method to fence (onoff or cycle) (Default Value: onoff) -T Wait X seconds after on/off operation (Default Value: 2) -f Wait X seconds before fencing is started -L Privilege level on IPMI device -v Verbose mode ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. diag The operational behavior of this is not known. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check the health of fence device metadata Display the XML metadata describing this resource. STDIN PARAMETERS
auth IPMI Lan Auth type (md5, password, or none) ipaddr IPMI Lan IP to talk to This parameter is always required. passwd Password (if required) to control power on IPMI device passwd_script Script to retrieve password (if required) lanplus Use Lanplus to improve security of connection login Username/Login (if required) to control power on IPMI device action Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) timeout Timeout (sec) for IPMI operation cipher Ciphersuite to use (same as ipmitool -C parameter) method Method to fence (onoff or cycle) (Default Value: onoff) power_wait Wait X seconds after on/off operation (Default Value: 2) delay Wait X seconds before fencing is started privlvl Privilege level on IPMI device verbose Verbose mode fence_ipmilan (Fence Agent) 2009-10-20 FENCE_AGENT(8)

Check Out this Related Man Page

FENCE_AGENT(8)						      System Manager's Manual						    FENCE_AGENT(8)

NAME
fence_ipmilan - Fence agent for IPMI over LAN DESCRIPTION
fence_ipmilan is an I/O Fencing agent which can be used with machines controlled by IPMI. This agent calls support software using ipmitool (http://ipmitool.sf.net/). To use fence_ipmilan with HP iLO 3 you have to enable lanplus option (lanplus / -P) and increase wait after operation to 4 seconds (power_wait=4 / -T 4) fence_ipmilan accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ipmilan can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. PARAMETERS
-A IPMI Lan Auth type (md5, password, or none) -a IPMI Lan IP to talk to -p Password (if required) to control power on IPMI device -S Script to retrieve password (if required) -P Use Lanplus -l Username/Login (if required) to control power on IPMI device -o Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) -t Timeout (sec) for IPMI operation -C Ciphersuite to use (same as ipmitool -C parameter) -M Method to fence (onoff or cycle) (Default Value: onoff) -T Wait X seconds after on/off operation (Default Value: 2) -f Wait X seconds before fencing is started -v Verbose mode ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. diag The operational behavior of this is not known. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more). metadata The operational behavior of this is not known. STDIN PARAMETERS
auth IPMI Lan Auth type (md5, password, or none) ipaddr IPMI Lan IP to talk to passwd Password (if required) to control power on IPMI device passwd_script Script to retrieve password (if required) lanplus Use Lanplus login Username/Login (if required) to control power on IPMI device action Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) timeout Timeout (sec) for IPMI operation cipher Ciphersuite to use (same as ipmitool -C parameter) method Method to fence (onoff or cycle) (Default Value: onoff) power_wait Wait X seconds after on/off operation (Default Value: 2) delay Wait X seconds before fencing is started verbose Verbose mode fence_ipmilan (Fence Agent) 2009-10-20 FENCE_AGENT(8)
Man Page

Featured Tech Videos