fence_idrac(8) [centos man page]
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME
fence_ipmilan - Fence agent for IPMI over LAN fence_ilo3 - Fence agent for HP iLO3 (symlink) fence_ilo4 - Fence agent for HP iLO4 (symlink) fence_idrac - Fence agent for Dell iDRAC (symlink) fence_imm - Fence agent for IBM Integrated Management Module (symlink) DESCRIPTION
fence_ipmilan is an I/O Fencing agent which can be used with machines controlled by IPMI. This agent calls support software using ipmitool (http://ipmitool.sf.net/). To use fence_ipmilan with HP iLO 3 or HP iLO 4 you have to enable lanplus option (lanplus / -P) and increase wait after operation to 4 sec- onds (power_wait=4 / -T 4) fence_ipmilan accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ipmilan can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.intel.com PARAMETERS
-A IPMI Lan Auth type (md5, password, or none) -a IPMI Lan IP to talk to This parameter is always required. -p Password (if required) to control power on IPMI device -S Script to retrieve password (if required) -P Use Lanplus to improve security of connection -l Username/Login (if required) to control power on IPMI device -o Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) -t Timeout (sec) for IPMI operation -C Ciphersuite to use (same as ipmitool -C parameter) -M Method to fence (onoff or cycle) (Default Value: onoff) -T Wait X seconds after on/off operation (Default Value: 2) -f Wait X seconds before fencing is started -L Privilege level on IPMI device -v Verbose mode ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. diag The operational behavior of this is not known. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check the health of fence device metadata Display the XML metadata describing this resource. STDIN PARAMETERS
auth IPMI Lan Auth type (md5, password, or none) ipaddr IPMI Lan IP to talk to This parameter is always required. passwd Password (if required) to control power on IPMI device passwd_script Script to retrieve password (if required) lanplus Use Lanplus to improve security of connection login Username/Login (if required) to control power on IPMI device action Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) timeout Timeout (sec) for IPMI operation cipher Ciphersuite to use (same as ipmitool -C parameter) method Method to fence (onoff or cycle) (Default Value: onoff) power_wait Wait X seconds after on/off operation (Default Value: 2) delay Wait X seconds before fencing is started privlvl Privilege level on IPMI device verbose Verbose mode fence_ipmilan (Fence Agent) 2009-10-20 FENCE_AGENT(8)
Check Out this Related Man Page
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME
fence_eps - Fence agent for ePowerSwitch DESCRIPTION
fence_eps is an I/O Fencing agent which can be used with the ePowerSwitch 8M+ power switch to fence connected machines. Fence agent works ONLY on 8M+ device, because this is only one, which has support for hidden page feature. Agent basically works by connecting to hidden page and pass appropriate arguments to GET request. This means, that hidden page feature must be enabled and properly configured. fence_eps accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_eps can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.epowerswitch.com PARAMETERS
-a, --ip=[ip] IP Address or Hostname This parameter is always required. -l, --username=[name] Login Name -p, --password=[password] Login password or passphrase -n, --plug=[id] Physical plug number, name of virtual machine or UUID This parameter is always required. -c, --page=[page] Name of hidden page (Default Value: hidden.htm) -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 23) -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -S, --password-script=[script] Script to retrieve password -o, --action=[action] Fencing Action (Default Value: reboot) -v, --verbose Verbose mode -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit -C, --separator=[char] Separator for CSV created by operation list (Default Value: ,) --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check the health of fence device metadata Display the XML metadata describing this resource. STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required. login Login Name passwd Login password or passphrase port Physical plug number, name of virtual machine or UUID This parameter is always required. hidden_page Name of hidden page (Default Value: hidden.htm) ipport TCP/UDP port to use for connection with device (Default Value: 23) inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only passwd_script Script to retrieve password action Fencing Action (Default Value: reboot) verbose Verbose mode debug Write debug information to given file version Display version information and exit help Display help and exit separator Separator for CSV created by operation list (Default Value: ,) power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) delay Wait X seconds before fencing is started (Default Value: 0) retry_on Count of attempts to retry power on (Default Value: 1) fence_eps (Fence Agent) 2009-10-20 FENCE_AGENT(8)