Unix/Linux Go Back    


CentOS 7.0 - man page for qslider (centos section 3qt)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)


QSlider(3qt)									     QSlider(3qt)

NAME
       QSlider - Vertical or horizontal slider

SYNOPSIS
       #include <qslider.h>

       Inherits QWidget and QRangeControl.

   Public Members
       enum TickSetting { NoMarks = 0, Above = 1, Left = Above, Below = 2, Right = Below, Both =
	   3 }
       QSlider ( QWidget * parent, const char * name = 0 )
       QSlider ( Orientation orientation, QWidget * parent, const char * name = 0 )
       QSlider ( int minValue, int maxValue, int pageStep, int value, Orientation orientation,
	   QWidget * parent, const char * name = 0 )
       ~QSlider ()
       virtual void setOrientation ( Orientation )
       Orientation orientation () const
       virtual void setTracking ( bool enable )
       bool tracking () const
       virtual void setPalette ( const QPalette & p )
       int sliderStart () const
       QRect sliderRect () const
       virtual void setTickmarks ( TickSetting )
       TickSetting tickmarks () const
       virtual void setTickInterval ( int )
       int tickInterval () const
       int minValue () const
       int maxValue () const
       void setMinValue ( int )
       void setMaxValue ( int )
       int lineStep () const
       int pageStep () const
       void setLineStep ( int )
       void setPageStep ( int )
       int value () const

   Public Slots
       virtual void setValue ( int )
       void addStep ()
       void subtractStep ()

   Signals
       void valueChanged ( int value )
       void sliderPressed ()
       void sliderMoved ( int value )
       void sliderReleased ()

   Important Inherited Members
       void setRange ( int minValue, int maxValue )

   Properties
       int lineStep - the current line step
       int maxValue - the current maximum value of the slider
       int minValue - the current minimum value of the slider
       Orientation orientation - the slider's orientation
       int pageStep - the current page step
       int tickInterval - the interval between tickmarks
       TickSetting tickmarks - the tickmark settings for this slider
       bool tracking - whether slider tracking is enabled
       int value - the current slider value

   Protected Members
       virtual void valueChange ()
       virtual void rangeChange ()

DESCRIPTION
       The QSlider widget provides a vertical or horizontal slider.

       The slider is the classic widget for controlling a bounded value. It lets the user move a
       slider along a horizontal or vertical groove and translates the slider's position into an
       integer value within the legal range.

       QSlider inherits QRangeControl, which provides the "integer" side of the slider.
       setRange() and value() are likely to be used by practically all slider users; see the
       QRangeControl documentation for information about the many other functions that class
       provides.

       The main functions offered by the slider itself are tickmark and orientation control; you
       can use setTickmarks() to indicate where you want the tickmarks to be, setTickInterval()
       to indicate how many of them you want and setOrientation() to indicate whether the slider
       is to be horizontal or vertical.

       A slider accepts focus on Tab and uses the mouse wheel and a suitable keyboard interface.

					    [Image Omitted]

					    [Image Omitted]

       See also QScrollBar, QSpinBox, GUI Design Handbook: Slider, and Basic Widgets.

   Member Type Documentation
QSlider::TickSetting
       This enum specifies where the tickmarks are to be drawn relative to the slider's groove
       and the handle the user moves.

       QSlider::NoMarks - do not draw any tickmarks.

       QSlider::Both - draw tickmarks on both sides of the groove.

       QSlider::Above - draw tickmarks above the (horizontal) slider

       QSlider::Below - draw tickmarks below the (horizontal) slider

       QSlider::Left - draw tickmarks to the left of the (vertical) slider

       QSlider::Right - draw tickmarks to the right of the (vertical) slider

MEMBER FUNCTION DOCUMENTATION
QSlider::QSlider ( QWidget * parent, const char * name = 0 )
       Constructs a vertical slider.

       The parent and name arguments are sent on to the QWidget constructor.

QSlider::QSlider ( Orientation orientation, QWidget * parent, const char * name = 0 )
       Constructs a slider.

       The orientation must be Qt::Vertical or Qt::Horizontal.

       The parent and name arguments are sent on to the QWidget constructor.

QSlider::QSlider ( int minValue, int maxValue, int pageStep, int value, Orientation orientation,
       QWidget * parent, const char * name = 0 )
       Constructs a slider whose value can never be smaller than minValue or greater than
       maxValue, whose page step size is pageStep and whose value is initially value (which is
       guaranteed to be in range using bound()).

       If orientation is Qt::Vertical the slider is vertical and if it is Qt::Horizontal the
       slider is horizontal.

       The parent and name arguments are sent on to the QWidget constructor.

QSlider::~QSlider ()
       Destructor.

void QSlider::addStep () [slot]
       Moves the slider one pageStep() up or right.

int QSlider::lineStep () const
       Returns the current line step. See the "lineStep" property for details.

int QSlider::maxValue () const
       Returns the current maximum value of the slider. See the "maxValue" property for details.

int QSlider::minValue () const
       Returns the current minimum value of the slider. See the "minValue" property for details.

Orientation QSlider::orientation () const
       Returns the slider's orientation. See the "orientation" property for details.

int QSlider::pageStep () const
       Returns the current page step. See the "pageStep" property for details.

void QSlider::rangeChange () [virtual protected]
       Implements the virtual QRangeControl function.

       Reimplemented from QRangeControl.

void QSlider::setLineStep ( int )
       Sets the current line step. See the "lineStep" property for details.

void QSlider::setMaxValue ( int )
       Sets the current maximum value of the slider. See the "maxValue" property for details.

void QSlider::setMinValue ( int )
       Sets the current minimum value of the slider. See the "minValue" property for details.

void QSlider::setOrientation ( Orientation ) [virtual]
       Sets the slider's orientation. See the "orientation" property for details.

void QSlider::setPageStep ( int )
       Sets the current page step. See the "pageStep" property for details.

void QSlider::setPalette ( const QPalette & p ) [virtual]
       Reimplements the virtual function QWidget::setPalette().

       Sets the background color to the mid color for Motif style sliders using palette p.

       Reimplemented from QWidget.

void QRangeControl::setRange ( int minValue, int maxValue )
       Sets the range control's minimum value to minValue and its maximum value to maxValue.

       Calls the virtual rangeChange() function if one or both of the new minimum and maximum
       values are different from the previous setting. Calls the virtual valueChange() function
       if the current value is adjusted because it was outside the new range.

       If maxValue is smaller than minValue, minValue becomes the only legal value.

       See also minValue and maxValue.

       Examples:

void QSlider::setTickInterval ( int ) [virtual]
       Sets the interval between tickmarks. See the "tickInterval" property for details.

void QSlider::setTickmarks ( TickSetting ) [virtual]
       Sets the tickmark settings for this slider. See the "tickmarks" property for details.

void QSlider::setTracking ( bool enable ) [virtual]
       Sets whether slider tracking is enabled to enable. See the "tracking" property for
       details.

void QSlider::setValue ( int ) [virtual slot]
       Sets the current slider value. See the "value" property for details.

void QSlider::sliderMoved ( int value ) [signal]
       This signal is emitted when the slider is dragged, with the new slider value as its
       argument.

void QSlider::sliderPressed () [signal]
       This signal is emitted when the user presses the slider with the mouse.

QRect QSlider::sliderRect () const
       Returns the slider handle rectangle. (This is the visual marker that the user can move.)

void QSlider::sliderReleased () [signal]
       This signal is emitted when the user releases the slider with the mouse.

int QSlider::sliderStart () const
       Returns the start position of the slider.

void QSlider::subtractStep () [slot]
       Moves the slider one pageStep() down or left.

int QSlider::tickInterval () const
       Returns the interval between tickmarks. See the "tickInterval" property for details.

TickSetting QSlider::tickmarks () const
       Returns the tickmark settings for this slider. See the "tickmarks" property for details.

bool QSlider::tracking () const
       Returns TRUE if slider tracking is enabled; otherwise returns FALSE. See the "tracking"
       property for details.

int QSlider::value () const
       Returns the current slider value. See the "value" property for details.

void QSlider::valueChange () [virtual protected]
       Implements the virtual QRangeControl function.

       Reimplemented from QRangeControl.

void QSlider::valueChanged ( int value ) [signal]
       This signal is emitted when the slider value is changed, with the new slider value as its
       argument.

       Examples:

   Property Documentation
int lineStep
       This property holds the current line step.

       When setting lineStep, the virtual stepChange() function will be called if the new line
       step is different from the previous setting.

       See also setSteps(), QRangeControl::pageStep(), and setRange().

       Set this property's value with setLineStep() and get this property's value with
       lineStep().

int maxValue
       This property holds the current maximum value of the slider.

       When setting this property, the QSlider::minValue is adjusted, if necessary, to ensure
       that the range remains valid.

       See also setRange().

       Set this property's value with setMaxValue() and get this property's value with
       maxValue().

int minValue
       This property holds the current minimum value of the slider.

       When setting this property, the QSlider::maxValue is adjusted, if necessary, to ensure
       that the range remains valid.

       See also setRange().

       Set this property's value with setMinValue() and get this property's value with
       minValue().

Orientation orientation
       This property holds the slider's orientation.

       The orientation must be Qt::Vertical (the default) or Qt::Horizontal.

       Set this property's value with setOrientation() and get this property's value with
       orientation().

int pageStep
       This property holds the current page step.

       When setting pageStep, the virtual stepChange() function will be called if the new page
       step is different from the previous setting.

       See also QRangeControl::setSteps(), lineStep, and setRange().

       Set this property's value with setPageStep() and get this property's value with
       pageStep().

int tickInterval
       This property holds the interval between tickmarks.

       This is a value interval, not a pixel interval. If it is 0, the slider will choose between
       lineStep() and pageStep(). The initial value of tickInterval is 0.

       See also QRangeControl::lineStep() and QRangeControl::pageStep().

       Set this property's value with setTickInterval() and get this property's value with
       tickInterval().

TickSetting tickmarks
       This property holds the tickmark settings for this slider.

       The valid values are in QSlider::TickSetting. The default is NoMarks.

       See also tickInterval.

       Set this property's value with setTickmarks() and get this property's value with
       tickmarks().

bool tracking
       This property holds whether slider tracking is enabled.

       If tracking is enabled (the default), the slider emits the valueChanged() signal whenever
       the slider is being dragged. If tracking is disabled, the slider emits the valueChanged()
       signal when the user releases the mouse button (unless the value happens to be the same as
       before).

       Set this property's value with setTracking() and get this property's value with
       tracking().

int value
       This property holds the current slider value.

       Set this property's value with setValue() and get this property's value with value().

       See also QRangeControl::value() and prevValue().

SEE ALSO
       http://doc.trolltech.com/qslider.html http://www.trolltech.com/faq/tech.html

COPYRIGHT
       Copyright 1992-2007 Trolltech ASA, http://www.trolltech.com.  See the license file
       included in the distribution for a complete license statement.

AUTHOR
       Generated automatically from the source code.

BUGS
       If you find a bug in Qt, please report it as described in
       http://doc.trolltech.com/bughowto.html.	Good bug reports help us to help you. Thank you.

       The definitive Qt documentation is provided in HTML format; it is located at
       $QTDIR/doc/html and can be read using Qt Assistant or with a web browser. This man page is
       provided as a convenience for those users who prefer man pages, although this format is
       not officially supported by Trolltech.

       If you find errors in this manual page, please report them to qt-bugs@trolltech.com.
       Please include the name of the manual page (qslider.3qt) and the Qt version (3.3.8).

Trolltech AS				 2 February 2007			     QSlider(3qt)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums


All times are GMT -4. The time now is 11:38 AM.