CentOS 7.0 - man page for test (centos section 3pm)

Linux & Unix Commands - Search Man Pages

Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

Test(3pm)			 Perl Programmers Reference Guide			Test(3pm)

       Test - provides a simple framework for writing test scripts

	 use strict;
	 use Test;

	 # use a BEGIN block so we print our plan before MyModule is loaded
	 BEGIN { plan tests => 14, todo => [3,4] }

	 # load your module...
	 use MyModule;

	 # Helpful notes.  All note-lines must start with a "#".
	 print "# I'm testing MyModule version $MyModule::VERSION\n";

	 ok(0); # failure
	 ok(1); # success

	 ok(0); # ok, expected failure (see todo list, above)
	 ok(1); # surprise success!

	 ok(0,1);	      # failure: '0' ne '1'
	 ok('broke','fixed'); # failure: 'broke' ne 'fixed'
	 ok('fixed','fixed'); # success: 'fixed' eq 'fixed'
	 ok('fixed',qr/x/);   # success: 'fixed' =~ qr/x/

	 ok(sub { 1+1 }, 2);  # success: '2' eq '2'
	 ok(sub { 1+1 }, 3);  # failure: '2' ne '3'

	 my @list = (0,0);
	 ok @list, 3, "\@list=".join(',',@list);      #extra notes
	 ok 'segmentation fault', '/(?i)success/';    #regex match

	   $^O =~ m/MSWin/ ? "Skip if MSWin" : 0,  # whether to skip
	   $foo, $bar  # arguments just like for ok(...)
	   $^O =~ m/MSWin/ ? 0 : "Skip unless MSWin",  # whether to skip
	   $foo, $bar  # arguments just like for ok(...)

       This module simplifies the task of writing test files for Perl modules, such that their
       output is in the format that Test::Harness expects to see.

       To write a test for your new (and probably not even done) module, create a new file called
       t/test.t (in a new t directory). If you have multiple test files, to test the "foo",
       "bar", and "baz" feature sets, then feel free to call your files t/foo.t, t/bar.t, and

       This module defines three public functions, "plan(...)", "ok(...)", and "skip(...)".  By
       default, all three are exported by the "use Test;" statement.

		BEGIN { plan %theplan; }

	   This should be the first thing you call in your test script.  It declares your testing
	   plan, how many there will be, if any of them should be allowed to fail, and so on.

	   Typical usage is just:

		use Test;
		BEGIN { plan tests => 23 }

	   These are the things that you can put in the parameters to plan:

	   "tests => number"
	       The number of tests in your script.  This means all ok() and skip() calls.

	   "todo => [1,5,14]"
	       A reference to a list of tests which are allowed to fail.  See "TODO TESTS".

	   "onfail => sub { ... }"
	   "onfail => \&some_sub"
	       A subroutine reference to be run at the end of the test script, if any of the
	       tests fail.  See "ONFAIL".

	   You must call "plan(...)" once and only once.  You should call it in a "BEGIN {...}"
	   block, like so:

		BEGIN { plan tests => 23 }

	     ok(1 + 1 == 2);
	     ok($have, $expect);
	     ok($have, $expect, $diagnostics);

	   This function is the reason for "Test"'s existence.	It's the basic function that
	   handles printing ""ok"" or ""not ok"", along with the current test number.  (That's
	   what "Test::Harness" wants to see.)

	   In its most basic usage, "ok(...)" simply takes a single scalar expression.	If its
	   value is true, the test passes; if false, the test fails.  Examples:

	       # Examples of ok(scalar)

	       ok( 1 + 1 == 2 );	   # ok if 1 + 1 == 2
	       ok( $foo =~ /bar/ );	   # ok if $foo contains 'bar'
	       ok( baz($x + $y) eq 'Armondo' );    # ok if baz($x + $y) returns
						   # 'Armondo'
	       ok( @a == @b );		   # ok if @a and @b are the same length

	   The expression is evaluated in scalar context.  So the following will work:

	       ok( @stuff );			   # ok if @stuff has any elements
	       ok( !grep !defined $_, @stuff );    # ok if everything in @stuff is
						   # defined.

	   A special case is if the expression is a subroutine reference (in either "sub {...}"
	   syntax or "\&foo" syntax).  In that case, it is executed and its value (true or false)
	   determines if the test passes or fails.  For example,

	       ok( sub {   # See whether sleep works at least passably
		 my $start_time = time;
		 sleep 5;
		 time() - $start_time  >= 4

	   In its two-argument form, "ok(arg1, arg2)" compares the two scalar values to see if
	   they match.	They match if both are undefined, or if arg2 is a regex that matches
	   arg1, or if they compare equal with "eq".

	       # Example of ok(scalar, scalar)

	       ok( "this", "that" );		   # not ok, 'this' ne 'that'
	       ok( "", undef ); 		   # not ok, "" is defined

	   The second argument is considered a regex if it is either a regex object or a string
	   that looks like a regex.  Regex objects are constructed with the qr// operator in
	   recent versions of perl.  A string is considered to look like a regex if its first and
	   last characters are "/", or if the first character is "m" and its second and last
	   characters are both the same non-alphanumeric non-whitespace character.  These regexp

	   Regex examples:

	       ok( 'JaffO', '/Jaff/' );    # ok, 'JaffO' =~ /Jaff/
	       ok( 'JaffO', 'm|Jaff|' );   # ok, 'JaffO' =~ m|Jaff|
	       ok( 'JaffO', qr/Jaff/ );    # ok, 'JaffO' =~ qr/Jaff/;
	       ok( 'JaffO', '/(?i)jaff/ ); # ok, 'JaffO' =~ /jaff/i;

	   If either (or both!) is a subroutine reference, it is run and used as the value for
	   comparing.  For example:

	       ok sub {
		   open(OUT, ">x.dat") || die $!;
		   print OUT "\x{e000}";
		   close OUT;
		   my $bytecount = -s 'x.dat';
		   unlink 'x.dat' or warn "Can't unlink : $!";
		   return $bytecount;

	   The above test passes two values to "ok(arg1, arg2)" -- the first a coderef, and the
	   second is the number 4.  Before "ok" compares them, it calls the coderef, and uses its
	   return value as the real value of this parameter. Assuming that $bytecount returns 4,
	   "ok" ends up testing "4 eq 4".  Since that's true, this test passes.

	   Finally, you can append an optional third argument, in "ok(arg1,arg2, note)", where
	   note is a string value that will be printed if the test fails.  This should be some
	   useful information about the test, pertaining to why it failed, and/or a description
	   of the test.  For example:

	       ok( grep($_ eq 'something unique', @stuff), 1,
		   "Something that should be unique isn't!\n".
		   '@stuff = '.join ', ', @stuff

	   Unfortunately, a note cannot be used with the single argument style of "ok()".  That
	   is, if you try "ok(arg1, note)", then "Test" will interpret this as "ok(arg1, arg2)",
	   and probably end up testing "arg1 eq arg2" -- and that's not what you want!

	   All of the above special cases can occasionally cause some problems.  See "BUGS and

       "skip(skip_if_true, args...)"
	   This is used for tests that under some conditions can be skipped.  It's basically
	   equivalent to:

	     if( $skip_if_true ) {
	     } else {
	       ok( args... );

	   ...except that the ok(1) emits not just ""ok testnum"" but actually ""ok testnum #

	   The arguments after the skip_if_true are what is fed to "ok(...)" if this test isn't

	   Example usage:

	     my $if_MSWin =
	       $^O =~ m/MSWin/ ? 'Skip if under MSWin' : '';

	     # A test to be skipped if under MSWin (i.e., run except under MSWin)
	     skip($if_MSWin, thing($foo), thing($bar) );

	   Or, going the other way:

	     my $unless_MSWin =
	       $^O =~ m/MSWin/ ? '' : 'Skip unless under MSWin';

	     # A test to be skipped unless under MSWin (i.e., run only under MSWin)
	     skip($unless_MSWin, thing($foo), thing($bar) );

	   The tricky thing to remember is that the first parameter is true if you want to skip
	   the test, not run it; and it also doubles as a note about why it's being skipped. So
	   in the first codeblock above, read the code as "skip if MSWin -- (otherwise) test
	   whether "thing($foo)" is "thing($bar)"" or for the second case, "skip unless

	   Also, when your skip_if_reason string is true, it really should (for backwards
	   compatibility with older Test.pm versions) start with the string "Skip", as shown in
	   the above examples.

	   Note that in the above cases, "thing($foo)" and "thing($bar)" are evaluated -- but as
	   long as the "skip_if_true" is true, then we "skip(...)" just tosses out their value
	   (i.e., not bothering to treat them like values to "ok(...)".  But if you need to not
	   eval the arguments when skipping the test, use this format:

	     skip( $unless_MSWin,
	       sub {
		 # This code returns true if the test passes.
		 # (But it doesn't even get called if the test is skipped.)
		 thing($foo) eq thing($bar)

	   or even this, which is basically equivalent:

	     skip( $unless_MSWin,
	       sub { thing($foo) }, sub { thing($bar) }

	   That is, both are like this:

	     if( $unless_MSWin ) {
	       ok(1);  # but it actually appends "# $unless_MSWin"
		       #  so that Test::Harness can tell it's a skip
	     } else {
	       # Not skipping, so actually call and evaluate...
	       ok( sub { thing($foo) }, sub { thing($bar) } );

       o   NORMAL TESTS

	   These tests are expected to succeed.  Usually, most or all of your tests are in this
	   category.  If a normal test doesn't succeed, then that means that something is wrong.

       o   SKIPPED TESTS

	   The "skip(...)" function is for tests that might or might not be possible to run,
	   depending on the availability of platform-specific features.  The first argument
	   should evaluate to true (think "yes, please skip") if the required feature is not
	   available.  After the first argument, "skip(...)" works exactly the same way as
	   "ok(...)" does.

       o   TODO TESTS

	   TODO tests are designed for maintaining an executable TODO list.  These tests are
	   expected to fail.  If a TODO test does succeed, then the feature in question shouldn't
	   be on the TODO list, now should it?

	   Packages should NOT be released with succeeding TODO tests.	As soon as a TODO test
	   starts working, it should be promoted to a normal test, and the newly working feature
	   should be documented in the release notes or in the change log.

	 BEGIN { plan test => 4, onfail => sub { warn "CALL 911!" } }

       Although test failures should be enough, extra diagnostics can be triggered at the end of
       a test run.  "onfail" is passed an array ref of hash refs that describe each test failure.
       Each hash will contain at least the following fields: "package", "repetition", and
       "result".  (You shouldn't rely on any other fields being present.)  If the test had an
       expected value or a diagnostic (or "note") string, these will also be included.

       The optional "onfail" hook might be used simply to print out the version of your package
       and/or how to report problems.  It might also be used to generate extremely sophisticated
       diagnostics for a particularly bizarre test failure.  However it's not a panacea.  Core
       dumps or other unrecoverable errors prevent the "onfail" hook from running.  (It is run
       inside an "END" block.)	Besides, "onfail" is probably over-kill in most cases.	(Your
       test code should be simpler than the code it is testing, yes?)

       o   "ok(...)"'s special handing of strings which look like they might be regexes can also
	   cause unexpected behavior.  An innocent:

	       ok( $fileglob, '/path/to/some/*stuff/' );

	   will fail, since Test.pm considers the second argument to be a regex!  The best bet is
	   to use the one-argument form:

	       ok( $fileglob eq '/path/to/some/*stuff/' );

       o   "ok(...)"'s use of string "eq" can sometimes cause odd problems when comparing
	   numbers, especially if you're casting a string to a number:

	       $foo = "1.0";
	       ok( $foo, 1 );	   # not ok, "1.0" ne 1

	   Your best bet is to use the single argument form:

	       ok( $foo == 1 );    # ok "1.0" == 1

       o   As you may have inferred from the above documentation and examples, "ok"'s prototype
	   is "($;$$)" (and, incidentally, "skip"'s is "($;$$$)"). This means, for example, that
	   you can do "ok @foo, @bar" to compare the size of the two arrays. But don't be fooled
	   into thinking that "ok @foo, @bar" means a comparison of the contents of two arrays --
	   you're comparing just the number of elements of each. It's so easy to make that
	   mistake in reading "ok @foo, @bar" that you might want to be very explicit about it,
	   and instead write "ok scalar(@foo), scalar(@bar)".

       o   This almost definitely doesn't do what you expect:

		ok $thingy->can('some_method');

	   Why?  Because "can" returns a coderef to mean "yes it can (and the method is
	   this...)", and then "ok" sees a coderef and thinks you're passing a function that you
	   want it to call and consider the truth of the result of!  I.e., just like:

		ok $thingy->can('some_method')->();

	   What you probably want instead is this:

		ok $thingy->can('some_method') && 1;

	   If the "can" returns false, then that is passed to "ok".  If it returns true, then the
	   larger expression "$thingy->can('some_method') && 1" returns 1, which "ok" sees as a
	   simple signal of success, as you would expect.

       o   The syntax for "skip" is about the only way it can be, but it's still quite confusing.
	   Just start with the above examples and you'll be okay.

	   Moreover, users may expect this:

	     skip $unless_mswin, foo($bar), baz($quux);

	   to not evaluate "foo($bar)" and "baz($quux)" when the test is being skipped.  But in
	   reality, they are evaluated, but "skip" just won't bother comparing them if
	   $unless_mswin is true.

	   You could do this:

	     skip $unless_mswin, sub{foo($bar)}, sub{baz($quux)};

	   But that's not terribly pretty.  You may find it simpler or clearer in the long run to
	   just do things like this:

	     if( $^O =~ m/MSWin/ ) {
	       print "# Yay, we're under $^O\n";
	       ok foo($bar), baz($quux);
	       ok thing($whatever), baz($stuff);
	       ok blorp($quux, $whatever);
	       ok foo($barzbarz), thang($quux);
	     } else {
	       print "# Feh, we're under $^O.  Watch me skip some tests...\n";
	       for(1 .. 4) { skip "Skip unless under MSWin" }

	   But be quite sure that "ok" is called exactly as many times in the first block as
	   "skip" is called in the second block.

       If "PERL_TEST_DIFF" environment variable is set, it will be used as a command for
       comparing unexpected multiline results.	If you have GNU diff installed, you might want to
       set "PERL_TEST_DIFF" to "diff -u".  If you don't have a suitable program, you might
       install the "Text::Diff" module and then set "PERL_TEST_DIFF" to be "perl -MText::Diff -e
       'print diff(@ARGV)'".  If "PERL_TEST_DIFF" isn't set but the "Algorithm::Diff" module is
       available, then it will be used to show the differences in multiline results.

       A past developer of this module once said that it was no longer being actively developed.
       However, rumors of its demise were greatly exaggerated.	Feedback and suggestions are
       quite welcome.

       Be aware that the main value of this module is its simplicity.  Note that there are
       already more ambitious modules out there, such as Test::More and Test::Unit.

       Some earlier versions of this module had docs with some confusing typos in the description
       of "skip(...)".


       Test::Simple, Test::More, Devel::Cover

       Test::Builder for building your own testing library.

       Test::Unit is an interesting XUnit-style testing library.

       Test::Inline and SelfTest let you embed tests in code.

       Copyright (c) 1998-2000 Joshua Nathaniel Pritikin.

       Copyright (c) 2001-2002 Michael G. Schwern.

       Copyright (c) 2002-2004 Sean M. Burke.

       Current maintainer: Jesse Vincent. <jesse@bestpractical.com>

       This package is free software and is provided "as is" without express or implied warranty.
       It may be used, redistributed and/or modified under the same terms as Perl itself.

perl v5.16.3				    2013-03-04					Test(3pm)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums

All times are GMT -4. The time now is 12:37 PM.

Unix & Linux Forums Content Copyright©1993-2018. All Rights Reserved.
Show Password

Not a Forum Member?
Forgot Password?