👤
Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:
Select Section of Man Page:
Select Man Page Repository:

CentOS 7.0 - man page for ppi::tokenizer (centos section 3)

PPI::Tokenizer(3)	       User Contributed Perl Documentation		PPI::Tokenizer(3)

NAME
       PPI::Tokenizer - The Perl Document Tokenizer

SYNOPSIS
	 # Create a tokenizer for a file, array or string
	 $Tokenizer = PPI::Tokenizer->new( 'filename.pl' );
	 $Tokenizer = PPI::Tokenizer->new( \@lines	 );
	 $Tokenizer = PPI::Tokenizer->new( \$source	 );

	 # Return all the tokens for the document
	 my $tokens = $Tokenizer->all_tokens;

	 # Or we can use it as an iterator
	 while ( my $Token = $Tokenizer->get_token ) {
	       print "Found token '$Token'\n";
	 }

	 # If we REALLY need to manually nudge the cursor, you
	 # can do that to (The lexer needs this ability to do rollbacks)
	 $is_incremented = $Tokenizer->increment_cursor;
	 $is_decremented = $Tokenizer->decrement_cursor;

DESCRIPTION
       PPI::Tokenizer is the class that provides Tokenizer objects for use in breaking strings of
       Perl source code into Tokens.

       By the time you are reading this, you probably need to know a little about the difference
       between how perl parses Perl "code" and how PPI parsers Perl "documents".

       "perl" itself (the interpreter) uses a heavily modified lex specification to specify its
       parsing logic, maintains several types of state as it goes, and incrementally tokenizes,
       lexes AND EXECUTES at the same time.

       In fact, it is provably impossible to use perl's parsing method without simultaneously
       executing code. A formal mathematical proof has been published demonstrating the method.

       This is where the truism "Only perl can parse Perl" comes from.

       PPI uses a completely different approach by abandoning the (impossible) ability to parse
       Perl the same way that the interpreter does, and instead parsing the source as a document,
       using a document structure independantly derived from the Perl documentation and
       approximating the perl interpreter interpretation as closely as possible.

       It was touch and go for a long time whether we could get it close enough, but in the end
       it turned out that it could be done.

       In this approach, the tokenizer "PPI::Tokenizer" is implemented separately from the lexer
       PPI::Lexer.

       The job of "PPI::Tokenizer" is to take pure source as a string and break it up into a
       stream/set of tokens, and contains most of the "black magic" used in PPI. By comparison,
       the lexer implements a relatively straight forward tree structure, and has an
       implementation that is uncomplicated (compared to the insanity in the tokenizer at least).

       The Tokenizer uses an immense amount of heuristics, guessing and cruft, supported by a
       very VERY flexible internal API, but fortunately it was possible to largely encapsulate
       the black magic, so there is not a lot that gets exposed to people using the
       "PPI::Tokenizer" itself.

METHODS
       Despite the incredible complexity, the Tokenizer itself only exposes a relatively small
       number of methods, with most of the complexity implemented in private methods.

   new $file | \@lines | \$source
       The main "new" constructor creates a new Tokenizer object. These objects have no
       configuration parameters, and can only be used once, to tokenize a single perl source
       file.

       It takes as argument either a normal scalar containing source code, a reference to a
       scalar containing source code, or a reference to an ARRAY containing newline-terminated
       lines of source code.

       Returns a new "PPI::Tokenizer" object on success, or throws a PPI::Exception exception on
       error.

   get_token
       When using the PPI::Tokenizer object as an iterator, the "get_token" method is the primary
       method that is used. It increments the cursor and returns the next Token in the output
       array.

       The actual parsing of the file is done only as-needed, and a line at a time. When
       "get_token" hits the end of the token array, it will cause the parser to pull in the next
       line and parse it, continuing as needed until there are more tokens on the output array
       that get_token can then return.

       This means that a number of Tokenizer objects can be created, and won't consume
       significant CPU until you actually begin to pull tokens from it.

       Return a PPI::Token object on success, 0 if the Tokenizer had reached the end of the file,
       or "undef" on error.

   all_tokens
       When not being used as an iterator, the "all_tokens" method tells the Tokenizer to parse
       the entire file and return all of the tokens in a single ARRAY reference.

       It should be noted that "all_tokens" does NOT interfere with the use of the Tokenizer
       object as an iterator (does not modify the token cursor) and use of the two different
       mechanisms can be mixed safely.

       Returns a reference to an ARRAY of PPI::Token objects on success or throws an exception on
       error.

   increment_cursor
       Although exposed as a public method, "increment_method" is implemented for expert use
       only, when writing lexers or other components that work directly on token streams.

       It manually increments the token cursor forward through the file, in effect "skipping" the
       next token.

       Return true if the cursor is incremented, 0 if already at the end of the file, or "undef"
       on error.

   decrement_cursor
       Although exposed as a public method, "decrement_method" is implemented for expert use
       only, when writing lexers or other components that work directly on token streams.

       It manually decrements the token cursor backwards through the file, in effect "rolling
       back" the token stream. And indeed that is what it is primarily intended for, when the
       component that is consuming the token stream needs to implement some sort of "roll back"
       feature in its use of the token stream.

       Return true if the cursor is decremented, 0 if already at the beginning of the file, or
       "undef" on error.

NOTES
   How the Tokenizer Works
       Understanding the Tokenizer is not for the feint-hearted. It is by far the most complex
       and twisty piece of perl I've ever written that is actually still built properly and isn't
       a terrible spaghetti-like mess. In fact, you probably want to skip this section.

       But if you really want to understand, well then here goes.

   Source Input and Clean Up
       The Tokenizer starts by taking source in a variety of forms, sucking it all in and merging
       into one big string, and doing our own internal line split, using a "universal line
       separator" which allows the Tokenizer to take source for any platform (and even supports a
       few known types of broken newlines caused by mixed mac/pc/*nix editor screw ups).

       The resulting array of lines is used to feed the tokenizer, and is also accessed directly
       by the heredoc-logic to do the line-oriented part of here-doc support.

   Doing Things the Old Fashioned Way
       Due to the complexity of perl, and after 2 previously aborted parser attempts, in the end
       the tokenizer was fashioned around a line-buffered character-by-character method.

       That is, the Tokenizer pulls and holds a line at a time into a line buffer, and then
       iterates a cursor along it. At each cursor position, a method is called in whatever token
       class we are currently in, which will examine the character at the current position, and
       handle it.

       As the handler methods in the various token classes are called, they build up a output
       token array for the source code.

       Various parts of the Tokenizer use look-ahead, arbitrary-distance look-behind (although
       currently the maximum is three significant tokens), or both, and various other heuristic
       guesses.

       I've been told it is officially termed a "backtracking parser with infinite lookaheads".

   State Variables
       Aside from the current line and the character cursor, the Tokenizer maintains a number of
       different state variables.

       Current Class
	   The Tokenizer maintains the current token class at all times. Much of the time is just
	   going to be the "Whitespace" class, which is what the base of a document is. As the
	   tokenizer executes the various character handlers, the class changes a lot as it moves
	   a long. In fact, in some instances, the character handler may not handle the character
	   directly itself, but rather change the "current class" and then hand off to the
	   character handler for the new class.

	   Because of this, and some other things I'll deal with later, the number of times the
	   character handlers are called does not in fact have a direct relationship to the
	   number of actual characters in the document.

       Current Zone
	   Rather than create a class stack to allow for infinitely nested layers of classes, the
	   Tokenizer recognises just a single layer.

	   To put it a different way, in various parts of the file, the Tokenizer will recognise
	   different "base" or "substrate" classes. When a Token such as a comment or a number is
	   finalised by the tokenizer, it "falls back" to the base state.

	   This allows proper tokenization of special areas such as __DATA__ and __END__ blocks,
	   which also contain things like comments and POD, without allowing the creation of any
	   significant Tokens inside these areas.

	   For the main part of a document we use PPI::Token::Whitespace for this, with the idea
	   being that code is "floating in a sea of whitespace".

       Current Token
	   The final main state variable is the "current token". This is the Token that is
	   currently being built by the Tokenizer. For certain types, it can be manipulated and
	   morphed and change class quite a bit while being assembled, as the Tokenizer's
	   understanding of the token content changes.

	   When the Tokenizer is confident that it has seen the end of the Token, it will be
	   "finalized", which adds it to the output token array and resets the current class to
	   that of the zone that we are currently in.

	   I should also note at this point that the "current token" variable is optional. The
	   Tokenizer is capable of knowing what class it is currently set to, without actually
	   having accumulated any characters in the Token.

   Making It Faster
       As I'm sure you can imagine, calling several different methods for each character and
       running regexes and other complex heuristics made the first fully working version of the
       tokenizer extremely slow.

       During testing, I created a metric to measure parsing speed called LPGC, or "lines per
       gigacycle" . A gigacycle is simple a billion CPU cycles on a typical single-core CPU, and
       so a Tokenizer running at "1000 lines per gigacycle" should generate around 1200 lines of
       tokenized code when running on a 1200 MHz processor.

       The first working version of the tokenizer ran at only 350 LPGC, so to tokenize a typical
       large module such as ExtUtils::MakeMaker took 10-15 seconds. This sluggishness made it
       unpractical for many uses.

       So in the current parser, there are multiple layers of optimisation very carefully built
       in to the basic. This has brought the tokenizer up to a more reasonable 1000 LPGC, at the
       expense of making the code quite a bit twistier.

   Making It Faster - Whole Line Classification
       The first step in the optimisation process was to add a hew handler to enable several of
       the more basic classes (whitespace, comments) to be able to be parsed a line at a time. At
       the start of each line, a special optional handler (only supported by a few classes) is
       called to check and see if the entire line can be parsed in one go.

       This is used mainly to handle things like POD, comments, empty lines, and a few other
       minor special cases.

   Making It Faster - Inlining
       The second stage of the optimisation involved inlining a small number of critical methods
       that were repeated an extremely high number of times. Profiling suggested that there were
       about 1,000,000 individual method calls per gigacycle, and by cutting these by two thirds
       a significant speed improvement was gained, in the order of about 50%.

       You may notice that many methods in the "PPI::Tokenizer" code look very nested and long
       hand. This is primarily due to this inlining.

       At around this time, some statistics code that existed in the early versions of the parser
       was also removed, as it was determined that it was consuming around 15% of the CPU for the
       entire parser, while making the core more complicated.

       A judgment call was made that with the difficulties likely to be encountered with future
       planned enhancements, and given the relatively high cost involved, the statistics features
       would be removed from the Tokenizer.

   Making It Faster - Quote Engine
       Once inlining had reached diminishing returns, it became obvious from the profiling
       results that a huge amount of time was being spent stepping a char at a time though long,
       simple and "syntactically boring" code such as comments and strings.

       The existing regex engine was expanded to also encompass quotes and other quote-like
       things, and a special abstract base class was added that provided a number of specialised
       parsing methods that would "scan ahead", looking out ahead to find the end of a string,
       and updating the cursor to leave it in a valid position for the next call.

       This is also the point at which the number of character handler calls began to greatly
       differ from the number of characters. But it has been done in a way that allows the parser
       to retain the power of the original version at the critical points, while skipping through
       the "boring bits" as needed for additional speed.

       The addition of this feature allowed the tokenizer to exceed 1000 LPGC for the first time.

   Making It Faster - The "Complete" Mechanism
       As it became evident that great speed increases were available by using this "skipping
       ahead" mechanism, a new handler method was added that explicitly handles the parsing of an
       entire token, where the structure of the token is relatively simple. Tokens such as
       symbols fit this case, as once we are passed the initial sigil and word char, we know that
       we can skip ahead and "complete" the rest of the token much more easily.

       A number of these have been added for most or possibly all of the common cases, with most
       of these "complete" handlers implemented using regular expressions.

       In fact, so many have been added that at this point, you could arguably reclassify the
       tokenizer as a "hybrid regex, char-by=char heuristic tokenizer". More tokens are now
       consumed in "complete" methods in a typical program than are handled by the normal char-
       by-char methods.

       Many of the these complete-handlers were implemented during the writing of the Lexer, and
       this has allowed the full parser to maintain around 1000 LPGC despite the increasing
       weight of the Lexer.

   Making It Faster - Porting To C (In Progress)
       While it would be extraordinarily difficult to port all of the Tokenizer to C, work has
       started on a PPI::XS "accelerator" package which acts as a separate and automatically-
       detected add-on to the main PPI package.

       PPI::XS implements faster versions of a variety of functions scattered over the entire PPI
       codebase, from the Tokenizer Core, Quote Engine, and various other places, and implements
       them identically in XS/C.

       In particular, the skip-ahead methods from the Quote Engine would appear to be extremely
       amenable to being done in C, and a number of other functions could be cherry-picked one at
       a time and implemented in C.

       Each method is heavily tested to ensure that the functionality is identical, and a
       versioning mechanism is included to ensure that if a function gets out of sync, PPI::XS
       will degrade gracefully and just not replace that single method.

TO DO
       - Add an option to reset or seek the token stream...

       - Implement more Tokenizer functions in PPI::XS

SUPPORT
       See the support section in the main module.

AUTHOR
       Adam Kennedy <adamk@cpan.org>

COPYRIGHT
       Copyright 2001 - 2011 Adam Kennedy.

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.

       The full text of the license can be found in the LICENSE file included with this module.

perl v5.16.3				    2011-02-26				PPI::Tokenizer(3)


All times are GMT -4. The time now is 03:55 AM.



All times are GMT -4. The time now is 03:55 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
×
UNIX.COM Login
Username:
Password:  
Show Password