grub2-bios-setup(3) [centos man page]

GRUB-BIOS-SETUP(3)					     Library Functions Manual						GRUB-BIOS-SETUP(3)

NAME

       grub-bios-setup -- Set up images to boot from a device.

SYNOPSIS

       grub-bios-setup [-a | --allow-floppy] [-b | --boot-image=FILE]
			[-c | --core-image=FILE] [-d | --directory=DIR]
			[-f | --force] [-m | --device-map=FILE]
			[-s | --skip-fs-probe] [-v | --verbose] DEVICE

DESCRIPTION

       You should not normally run this program directly.  Use grub-install instead.

OPTIONS

       --allow-floppy
	      Make  the device also bootable as a floppy.  This option is the default for /dev/fdX devices.  Some BIOSes will not boot images cre-
	      ated with this option.

       --boot-image=FILE
	      Use FILE as the boot image.  The default value is boot.img.

       --core-image=FILE
	      Use FILE as ther core image.  The default value is core.img.

       --directory=DIR
	      Use GRUB files in the directory DIR.  The default value is /boot/grub.

       --force
	      Install even if problems are detected.

       --device-map=FILE
	      Use FILE as the device map.  The default value is /boot/grub/device.map .

       --skip-fs-probe
	      Do not probe DEVICE for filesystems.

       --verbose
	      Print verbose messages.

SEE ALSO

       info grub

								  Wed Feb 26 2014						GRUB-BIOS-SETUP(3)

GRUB-INSTALL(8) 							FSF							   GRUB-INSTALL(8)

NAME

       grub-install - install GRUB on your drive

SYNOPSIS

       grub-install [OPTION] install_device

DESCRIPTION

       Install GRUB on your drive.

       -h, --help
	      print this message and exit

       -v, --version
	      print the version information and exit

       --root-directory=DIR
	      install GRUB images under the directory DIR instead of the root directory

       --grub-shell=FILE
	      use FILE as the grub shell

       --no-floppy
	      do not probe any floppy drive

       --force-lba
	      force GRUB to use LBA mode even for a buggy BIOS

       --recheck
	      probe a device map even if it already exists

       INSTALL_DEVICE can be a GRUB device name or a system device filename.

       grub-install  copies GRUB images into the DIR/boot directory specfied by --root-directory, and uses the grub shell to install grub into the
       boot sector.

       The grub source distribution carries this script to ease the installation of grub as a boot loader. In Suse Linux however,  grub  installa-
       tion  is  much  better handled by Yast; use of this script is generally discouraged and therefore unsupported. Consequently, the script has
       been renamed to grub-install.unsupported.

       In order to (re-)install grub for the currently running system, simply use Yast. For an installation aiming  at	a  differing  system,  the
       crafting  of an appropriate device.map and grub shell script is strongly advised, e.g.  "grub --batch --device-map=target-device.map < tar-
       get-grub.conf"

SEE ALSO

       The full documentation for grub-install is maintained as a Texinfo manual.  If the info and grub-install programs are properly installed at
       your site, the command

	      info grub-install

       should give you access to the complete manual.

grub-install (GNU GRUB 0.97)					     May 2005							   GRUB-INSTALL(8)