
dpbsvx.f(3) LAPACK dpbsvx.f(3)
NAME
dpbsvx.f 
SYNOPSIS
Functions/Subroutines
subroutine dpbsvx (FACT, UPLO, N, KD, NRHS, AB, LDAB, AFB, LDAFB, EQUED, S, B, LDB, X,
LDX, RCOND, FERR, BERR, WORK, IWORK, INFO)
DPBSVX computes the solution to system of linear equations A * X = B for OTHER
matrices
Function/Subroutine Documentation
subroutine dpbsvx (characterFACT, characterUPLO, integerN, integerKD, integerNRHS, double
precision, dimension( ldab, * )AB, integerLDAB, double precision, dimension( ldafb, *
)AFB, integerLDAFB, characterEQUED, double precision, dimension( * )S, double precision,
dimension( ldb, * )B, integerLDB, double precision, dimension( ldx, * )X, integerLDX,
double precisionRCOND, double precision, dimension( * )FERR, double precision, dimension(
* )BERR, double precision, dimension( * )WORK, integer, dimension( * )IWORK, integerINFO)
DPBSVX computes the solution to system of linear equations A * X = B for OTHER matrices
Purpose:
DPBSVX uses the Cholesky factorization A = U**T*U or A = L*L**T to
compute the solution to a real system of linear equations
A * X = B,
where A is an NbyN symmetric positive definite band matrix and X
and B are NbyNRHS matrices.
Error bounds on the solution and a condition estimate are also
provided.
Description:
The following steps are performed:
1. If FACT = 'E', real scaling factors are computed to equilibrate
the system:
diag(S) * A * diag(S) * inv(diag(S)) * X = diag(S) * B
Whether or not the system will be equilibrated depends on the
scaling of the matrix A, but if equilibration is used, A is
overwritten by diag(S)*A*diag(S) and B by diag(S)*B.
2. If FACT = 'N' or 'E', the Cholesky decomposition is used to
factor the matrix A (after equilibration if FACT = 'E') as
A = U**T * U, if UPLO = 'U', or
A = L * L**T, if UPLO = 'L',
where U is an upper triangular band matrix, and L is a lower
triangular band matrix.
3. If the leading ibyi principal minor is not positive definite,
then the routine returns with INFO = i. Otherwise, the factored
form of A is used to estimate the condition number of the matrix
A. If the reciprocal of the condition number is less than machine
precision, INFO = N+1 is returned as a warning, but the routine
still goes on to solve for X and compute error bounds as
described below.
4. The system of equations is solved for X using the factored form
of A.
5. Iterative refinement is applied to improve the computed solution
matrix and calculate error bounds and backward error estimates
for it.
6. If equilibration was used, the matrix X is premultiplied by
diag(S) so that it solves the original system before
equilibration.
Parameters:
FACT
FACT is CHARACTER*1
Specifies whether or not the factored form of the matrix A is
supplied on entry, and if not, whether the matrix A should be
equilibrated before it is factored.
= 'F': On entry, AFB contains the factored form of A.
If EQUED = 'Y', the matrix A has been equilibrated
with scaling factors given by S. AB and AFB will not
be modified.
= 'N': The matrix A will be copied to AFB and factored.
= 'E': The matrix A will be equilibrated if necessary, then
copied to AFB and factored.
UPLO
UPLO is CHARACTER*1
= 'U': Upper triangle of A is stored;
= 'L': Lower triangle of A is stored.
N
N is INTEGER
The number of linear equations, i.e., the order of the
matrix A. N >= 0.
KD
KD is INTEGER
The number of superdiagonals of the matrix A if UPLO = 'U',
or the number of subdiagonals if UPLO = 'L'. KD >= 0.
NRHS
NRHS is INTEGER
The number of righthand sides, i.e., the number of columns
of the matrices B and X. NRHS >= 0.
AB
AB is DOUBLE PRECISION array, dimension (LDAB,N)
On entry, the upper or lower triangle of the symmetric band
matrix A, stored in the first KD+1 rows of the array, except
if FACT = 'F' and EQUED = 'Y', then A must contain the
equilibrated matrix diag(S)*A*diag(S). The jth column of A
is stored in the jth column of the array AB as follows:
if UPLO = 'U', AB(KD+1+ij,j) = A(i,j) for max(1,jKD)<=i<=j;
if UPLO = 'L', AB(1+ij,j) = A(i,j) for j<=i<=min(N,j+KD).
See below for further details.
On exit, if FACT = 'E' and EQUED = 'Y', A is overwritten by
diag(S)*A*diag(S).
LDAB
LDAB is INTEGER
The leading dimension of the array A. LDAB >= KD+1.
AFB
AFB is DOUBLE PRECISION array, dimension (LDAFB,N)
If FACT = 'F', then AFB is an input argument and on entry
contains the triangular factor U or L from the Cholesky
factorization A = U**T*U or A = L*L**T of the band matrix
A, in the same storage format as A (see AB). If EQUED = 'Y',
then AFB is the factored form of the equilibrated matrix A.
If FACT = 'N', then AFB is an output argument and on exit
returns the triangular factor U or L from the Cholesky
factorization A = U**T*U or A = L*L**T.
If FACT = 'E', then AFB is an output argument and on exit
returns the triangular factor U or L from the Cholesky
factorization A = U**T*U or A = L*L**T of the equilibrated
matrix A (see the description of A for the form of the
equilibrated matrix).
LDAFB
LDAFB is INTEGER
The leading dimension of the array AFB. LDAFB >= KD+1.
EQUED
EQUED is CHARACTER*1
Specifies the form of equilibration that was done.
= 'N': No equilibration (always true if FACT = 'N').
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
EQUED is an input argument if FACT = 'F'; otherwise, it is an
output argument.
S
S is DOUBLE PRECISION array, dimension (N)
The scale factors for A; not accessed if EQUED = 'N'. S is
an input argument if FACT = 'F'; otherwise, S is an output
argument. If FACT = 'F' and EQUED = 'Y', each element of S
must be positive.
B
B is DOUBLE PRECISION array, dimension (LDB,NRHS)
On entry, the NbyNRHS right hand side matrix B.
On exit, if EQUED = 'N', B is not modified; if EQUED = 'Y',
B is overwritten by diag(S) * B.
LDB
LDB is INTEGER
The leading dimension of the array B. LDB >= max(1,N).
X
X is DOUBLE PRECISION array, dimension (LDX,NRHS)
If INFO = 0 or INFO = N+1, the NbyNRHS solution matrix X to
the original system of equations. Note that if EQUED = 'Y',
A and B are modified on exit, and the solution to the
equilibrated system is inv(diag(S))*X.
LDX
LDX is INTEGER
The leading dimension of the array X. LDX >= max(1,N).
RCOND
RCOND is DOUBLE PRECISION
The estimate of the reciprocal condition number of the matrix
A after equilibration (if done). If RCOND is less than the
machine precision (in particular, if RCOND = 0), the matrix
is singular to working precision. This condition is
indicated by a return code of INFO > 0.
FERR
FERR is DOUBLE PRECISION array, dimension (NRHS)
The estimated forward error bound for each solution vector
X(j) (the jth column of the solution matrix X).
If XTRUE is the true solution corresponding to X(j), FERR(j)
is an estimated upper bound for the magnitude of the largest
element in (X(j)  XTRUE) divided by the magnitude of the
largest element in X(j). The estimate is as reliable as
the estimate for RCOND, and is almost always a slight
overestimate of the true error.
BERR
BERR is DOUBLE PRECISION array, dimension (NRHS)
The componentwise relative backward error of each solution
vector X(j) (i.e., the smallest relative change in
any element of A or B that makes X(j) an exact solution).
WORK
WORK is DOUBLE PRECISION array, dimension (3*N)
IWORK
IWORK is INTEGER array, dimension (N)
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = i, the ith argument had an illegal value
> 0: if INFO = i, and i is
<= N: the leading minor of order i of A is
not positive definite, so the factorization
could not be completed, and the solution has not
been computed. RCOND = 0 is returned.
= N+1: U is nonsingular, but RCOND is less than machine
precision, meaning that the matrix is singular
to working precision. Nevertheless, the
solution and error bounds are computed because
there are a number of situations where the
computed solution can be more accurate than the
value of RCOND would suggest.
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
April 2012
Further Details:
The band storage scheme is illustrated by the following example, when
N = 6, KD = 2, and UPLO = 'U':
Twodimensional storage of the symmetric matrix A:
a11 a12 a13
a22 a23 a24
a33 a34 a35
a44 a45 a46
a55 a56
(aij=conjg(aji)) a66
Band storage of the upper triangle of A:
* * a13 a24 a35 a46
* a12 a23 a34 a45 a56
a11 a22 a33 a44 a55 a66
Similarly, if UPLO = 'L' the format of A is as follows:
a11 a22 a33 a44 a55 a66
a21 a32 a43 a54 a65 *
a31 a42 a53 a64 * *
Array elements marked * are not used by the routine.
Definition at line 342 of file dpbsvx.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.
Version 3.4.2 Tue Sep 25 2012 dpbsvx.f(3) 
