×
UNIX.COM Login
Username:
Password:  
Show Password






👤


CentOS 7.0 - man page for perlos390 (centos section 1)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:
man
Select Man Page Set:
apropos Keyword Search (sections above)


PERLOS390(1)			 Perl Programmers Reference Guide		     PERLOS390(1)

NAME
       perlos390 - building and installing Perl for OS/390 and z/OS

SYNOPSIS
       This document will help you Configure, build, test and install Perl on OS/390 (aka z/OS)
       Unix System Services.

DESCRIPTION
       This is a fully ported Perl for OS/390 Version 2 Release 3, 5, 6, 7, 8, and 9.  It may
       work on other versions or releases, but those are the ones we've tested it on.

       You may need to carry out some system configuration tasks before running the Configure
       script for Perl.

   Tools
       The z/OS Unix Tools and Toys list may prove helpful and contains links to ports of much of
       the software helpful for building Perl.
       http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1toy.html

   Unpacking Perl distribution on OS/390
       If using ftp remember to transfer the distribution in binary format.

       Gunzip/gzip for OS/390 is discussed at:

	 http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1ty1.html

       to extract an ASCII tar archive on OS/390, try this:

	  pax -o to=IBM-1047,from=ISO8859-1 -r < latest.tar

       or

	  zcat latest.tar.Z | pax -o to=IBM-1047,from=ISO8859-1 -r

       If you get lots of errors of the form

	 tar: FSUM7171 ...: cannot set uid/gid: EDC5139I Operation not permitted.

       you didn't read the above and tried to use tar instead of pax, you'll first have to remove
       the (now corrupt) perl directory

	  rm -rf perl-...

       and then use pax.

   Setup and utilities for Perl on OS/390
       Be sure that your yacc installation is in place including any necessary parser template
       files. If you have not already done so then be sure to:

	 cp /samples/yyparse.c /etc

       This may also be a good time to ensure that your /etc/protocol file and either your
       /etc/resolv.conf or /etc/hosts files are in place.  The IBM document that described such
       USS system setup issues was SC28-1890-07 "OS/390 UNIX System Services Planning", in
       particular Chapter 6 on customizing the OE shell.

       GNU make for OS/390, which is recommended for the build of perl (as well as building CPAN
       modules and extensions), is available from the "Tools".

       Some people have reported encountering "Out of memory!" errors while trying to build Perl
       using GNU make binaries.  If you encounter such trouble then try to download the source
       code kit and build GNU make from source to eliminate any such trouble.  You might also
       find GNU make (as well as Perl and Apache) in the red-piece/book "Open Source Software for
       OS/390 UNIX", SG24-5944-00 from IBM.

       If instead of the recommended GNU make you would like to use the system supplied make
       program then be sure to install the default rules file properly via the shell command:

	   cp /samples/startup.mk /etc

       and be sure to also set the environment variable _C89_CCMODE=1 (exporting _C89_CCMODE=1 is
       also a good idea for users of GNU make).

       You might also want to have GNU groff for OS/390 installed before running the "make
       install" step for Perl.

       There is a syntax error in the /usr/include/sys/socket.h header file that IBM supplies
       with USS V2R7, V2R8, and possibly V2R9.	The problem with the header file is that near the
       definition of the SO_REUSEPORT constant there is a spurious extra '/' character outside of
       a comment like so:

	#define SO_REUSEPORT	0x0200	  /* allow local address & port
					     reuse */			 /

       You could edit that header yourself to remove that last '/', or you might note that
       Language Environment (LE) APAR PQ39997 describes the problem and PTF's UQ46272 and UQ46271
       are the (R8 at least) fixes and apply them.  If left unattended that syntax error will
       turn up as an inability for Perl to build its "Socket" extension.

       For successful testing you may need to turn on the sticky bit for your world readable /tmp
       directory if you have not already done so (see man chmod).

   Configure Perl on OS/390
       Once you've unpacked the distribution, run "sh Configure" (see INSTALL for a full
       discussion of the Configure options).  There is a "hints" file for os390 that specifies
       the correct values for most things.  Some things to watch out for include:

       o   A message of the form:

	    (I see you are using the Korn shell.  Some ksh's blow up on Configure,
	    mainly on older exotic systems.  If yours does, try the Bourne shell instead.)

	   is nothing to worry about at all.

       o   Some of the parser default template files in /samples are needed in /etc.  In
	   particular be sure that you at least copy /samples/yyparse.c to /etc before running
	   Perl's Configure.  This step ensures successful extraction of EBCDIC versions of
	   parser files such as perly.c, perly.h, and x2p/a2p.c.  This has to be done before
	   running Configure the first time.  If you failed to do so then the easiest way to re-
	   Configure Perl is to delete your misconfigured build root and re-extract the source
	   from the tar ball.  Then you must ensure that /etc/yyparse.c is properly in place
	   before attempting to re-run Configure.

       o   This port will support dynamic loading, but it is not selected by default.  If you
	   would like to experiment with dynamic loading then be sure to specify -Dusedl in the
	   arguments to the Configure script.  See the comments in hints/os390.sh for more
	   information on dynamic loading.  If you build with dynamic loading then you will need
	   to add the $archlibexp/CORE directory to your LIBPATH environment variable in order
	   for perl to work.  See the config.sh file for the value of $archlibexp.  If in trying
	   to use Perl you see an error message similar to:

	    CEE3501S The module libperl.dll was not found.
		    From entry point __dllstaticinit at compile unit offset +00000194 at

	   then your LIBPATH does not have the location of libperl.x and either libperl.dll or
	   libperl.so in it.  Add that directory to your LIBPATH and proceed.

       o   Do not turn on the compiler optimization flag "-O".	There is a bug in either the
	   optimizer or perl that causes perl to not work correctly when the optimizer is on.

       o   Some of the configuration files in /etc used by the networking APIs are either missing
	   or have the wrong names.  In particular, make sure that there's either an
	   /etc/resolv.conf or an /etc/hosts, so that gethostbyname() works, and make sure that
	   the file /etc/proto has been renamed to /etc/protocol (NOT /etc/protocols, as used by
	   other Unix systems).  You may have to look for things like HOSTNAME and DOMAINORIGIN
	   in the "//'SYS1.TCPPARMS(TCPDATA)'" PDS member in order to properly set up your /etc
	   networking files.

   Build, Test, Install Perl on OS/390
       Simply put:

	   sh Configure
	   make
	   make test

       if everything looks ok (see the next section for test/IVP diagnosis) then:

	   make install

       this last step may or may not require UID=0 privileges depending on how you answered the
       questions that Configure asked and whether or not you have write access to the directories
       you specified.

   Build Anomalies with Perl on OS/390
       "Out of memory!" messages during the build of Perl are most often fixed by re building the
       GNU make utility for OS/390 from a source code kit.

       Another memory limiting item to check is your MAXASSIZE parameter in your
       'SYS1.PARMLIB(BPXPRMxx)' data set (note too that as of V2R8 address space limits can be
       set on a per user ID basis in the USS segment of a RACF profile).  People have reported
       successful builds of Perl with MAXASSIZE parameters as small as 503316480 (and it may be
       possible to build Perl with a MAXASSIZE smaller than that).

       Within USS your /etc/profile or $HOME/.profile may limit your ulimit settings.  Check that
       the following command returns reasonable values:

	   ulimit -a

       To conserve memory you should have your compiler modules loaded into the Link Pack Area
       (LPA/ELPA) rather than in a link list or step lib.

       If the c89 compiler complains of syntax errors during the build of the Socket extension
       then be sure to fix the syntax error in the system header /usr/include/sys/socket.h.

   Testing Anomalies with Perl on OS/390
       The "make test" step runs a Perl Verification Procedure, usually before installation.  You
       might encounter STDERR messages even during a successful run of "make test".  Here is a
       guide to some of the more commonly seen anomalies:

       o   A message of the form:

	    io/openpid...........CEE5210S The signal SIGHUP was received.
	    CEE5210S The signal SIGHUP was received.
	    CEE5210S The signal SIGHUP was received.
	    ok

	   indicates that the t/io/openpid.t test of Perl has passed but done so with extraneous
	   messages on stderr from CEE.

       o   A message of the form:

	    lib/ftmp-security....File::Temp::_gettemp: Parent directory (/tmp/) is not safe
	    (sticky bit not set when world writable?) at lib/ftmp-security.t line 100
	    File::Temp::_gettemp: Parent directory (/tmp/) is not safe (sticky bit not
	    set when world writable?) at lib/ftmp-security.t line 100
	    ok

	   indicates a problem with the permissions on your /tmp directory within the HFS.  To
	   correct that problem issue the command:

		chmod a+t /tmp

	   from an account with write access to the directory entry for /tmp.

       o   Out of Memory!

	   Recent perl test suite is quite memory hungry. In addition to the comments above on
	   memory limitations it is also worth checking for _CEE_RUNOPTS in your environment.
	   Perl now has (in miniperlmain.c) a C #pragma to set CEE run options, but the
	   environment variable wins.

	   The C code asks for:

	    #pragma runopts(HEAP(2M,500K,ANYWHERE,KEEP,8K,4K) STACK(,,ANY,) ALL31(ON))

	   The important parts of that are the second argument (the increment) to HEAP, and
	   allowing the stack to be "Above the (16M) line". If the heap increment is too small
	   then when perl (for example loading unicode/Name.pl) tries to create a "big" (400K+)
	   string it cannot fit in a single segment and you get "Out of Memory!" - even if there
	   is still plenty of memory available.

	   A related issue is use with perl's malloc. Perl's malloc uses "sbrk()" to get memory,
	   and "sbrk()" is limited to the first allocation so in this case something like:

	     HEAP(8M,500K,ANYWHERE,KEEP,8K,4K)

	   is needed to get through the test suite.

   Installation Anomalies with Perl on OS/390
       The installman script will try to run on OS/390.  There will be fewer errors if you have a
       roff utility installed.	You can obtain GNU groff from the Redbook SG24-5944-00 ftp site.

   Usage Hints for Perl on OS/390
       When using perl on OS/390 please keep in mind that the EBCDIC and ASCII character sets are
       different.  See perlebcdic.pod for more on such character set issues.  Perl builtin
       functions that may behave differently under EBCDIC are also mentioned in the perlport.pod
       document.

       Open Edition (UNIX System Services) from V2R8 onward does support #!/path/to/perl script
       invocation.  There is a PTF available from IBM for V2R7 that will allow shell/kernel
       support for #!.	USS releases prior to V2R7 did not support the #! means of script
       invocation.  If you are running V2R6 or earlier then see:

	   head `whence perldoc`

       for an example of how to use the "eval exec" trick to ask the shell to have Perl run your
       scripts on those older releases of Unix System Services.

       If you are having trouble with square brackets then consider switching your rlogin or
       telnet client.  Try to avoid older 3270 emulators and ISHELL for working with Perl on USS.

   Floating Point Anomalies with Perl on OS/390
       There appears to be a bug in the floating point implementation on S/390 systems such that
       calling int() on the product of a number and a small magnitude number is not the same as
       calling int() on the quotient of that number and a large magnitude number.  For example,
       in the following Perl code:

	   my $x = 100000.0;
	   my $y = int($x * 1e-5) * 1e5; # '0'
	   my $z = int($x / 1e+5) * 1e5;  # '100000'
	   print "\$y is $y and \$z is $z\n"; # $y is 0 and $z is 100000

       Although one would expect the quantities $y and $z to be the same and equal to 100000 they
       will differ and instead will be 0 and 100000 respectively.

       The problem can be further examined in a roughly equivalent C program:

	   #include <stdio.h>
	   #include <math.h>
	   main()
	   {
	   double r1,r2;
	   double x = 100000.0;
	   double y = 0.0;
	   double z = 0.0;
	   x = 100000.0 * 1e-5;
	   r1 = modf (x,&y);
	   x = 100000.0 / 1e+5;
	   r2 = modf (x,&z);
	   printf("y is %e and z is %e\n",y*1e5,z*1e5);
	   /* y is 0.000000e+00 and z is 1.000000e+05 (with c89) */
	   }

   Modules and Extensions for Perl on OS/390
       Pure pure (that is non xs) modules may be installed via the usual:

	   perl Makefile.PL
	   make
	   make test
	   make install

       If you built perl with dynamic loading capability then that would also be the way to build
       xs based extensions.  However, if you built perl with the default static linking you can
       still build xs based extensions for OS/390 but you will need to follow the instructions in
       ExtUtils::MakeMaker for building statically linked perl binaries.  In the simplest
       configurations building a static perl + xs extension boils down to:

	   perl Makefile.PL
	   make
	   make perl
	   make test
	   make install
	   make -f Makefile.aperl inst_perl MAP_TARGET=perl

       In most cases people have reported better results with GNU make rather than the system's
       /bin/make program, whether for plain modules or for xs based extensions.

       If the make process encounters trouble with either compilation or linking then try setting
       the _C89_CCMODE to 1.  Assuming sh is your login shell then run:

	   export _C89_CCMODE=1

       If tcsh is your login shell then use the setenv command.

AUTHORS
       David Fiander and Peter Prymmer with thanks to Dennis Longnecker and William Raffloer for
       valuable reports, LPAR and PTF feedback.  Thanks to Mike MacIsaac and Egon Terwedow for
       SG24-5944-00.  Thanks to Ignasi Roca for pointing out the floating point problems.  Thanks
       to John Goodyear for dynamic loading help.

SEE ALSO
       INSTALL, perlport, perlebcdic, ExtUtils::MakeMaker.

	   http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1toy.html

	   http://www.redbooks.ibm.com/redbooks/SG245944.html

	   http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1ty1.html#opensrc

	   http://www.xray.mpe.mpg.de/mailing-lists/perl-mvs/

	   http://publibz.boulder.ibm.com:80/cgi-bin/bookmgr_OS390/BOOKS/ceea3030/

	   http://publibz.boulder.ibm.com:80/cgi-bin/bookmgr_OS390/BOOKS/CBCUG030/

   Mailing list for Perl on OS/390
       If you are interested in the VM/ESA, z/OS (formerly known as OS/390) and POSIX-BC (BS2000)
       ports of Perl then see the perl-mvs mailing list.  To subscribe, send an empty message to
       perl-mvs-subscribe@perl.org.

       See also:

	   http://lists.perl.org/list/perl-mvs.html

       There are web archives of the mailing list at:

	   http://www.xray.mpe.mpg.de/mailing-lists/perl-mvs/
	   http://archive.develooper.com/perl-mvs@perl.org/

HISTORY
       This document was originally written by David Fiander for the 5.005 release of Perl.

       This document was podified for the 5.005_03 release of Perl 11 March 1999.

       Updated 28 November 2001 for broken URLs.

       Updated 12 November 2000 for the 5.7.1 release of Perl.

       Updated 15 January 2001 for the 5.7.1 release of Perl.

       Updated 24 January 2001 to mention dynamic loading.

       Updated 12 March 2001 to mention //'SYS1.TCPPARMS(TCPDATA)'.

perl v5.16.3				    2013-03-04				     PERLOS390(1)


All times are GMT -4. The time now is 07:42 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.