×
UNIX.COM Login
Username:
Password:  
Show Password






👤


CentOS 7.0 - man page for git-merge (centos section 1)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:
man
Select Man Page Set:
apropos Keyword Search (sections above)


GIT-MERGE(1)				    Git Manual				     GIT-MERGE(1)

NAME
       git-merge - Join two or more development histories together

SYNOPSIS
       git merge [-n] [--stat] [--no-commit] [--squash] [--[no-]edit]
	       [-s <strategy>] [-X <strategy-option>]
	       [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...]
       git merge <msg> HEAD <commit>...
       git merge --abort


DESCRIPTION
       Incorporates changes from the named commits (since the time their histories diverged from
       the current branch) into the current branch. This command is used by git pull to
       incorporate changes from another repository and can be used by hand to merge changes from
       one branch into another.

       Assume the following history exists and the current branch is "master":

		     A---B---C topic
		    /
	       D---E---F---G master

       Then "git merge topic" will replay the changes made on the topic branch since it diverged
       from master (i.e., E) until its current commit (C) on top of master, and record the result
       in a new commit along with the names of the two parent commits and a log message from the
       user describing the changes.

		     A---B---C topic
		    /	      \
	       D---E---F---G---H master

       The second syntax (<msg> HEAD <commit>...) is supported for historical reasons. Do not use
       it from the command line or in new scripts. It is the same as git merge -m <msg>
       <commit>....

       The third syntax ("git merge --abort") can only be run after the merge has resulted in
       conflicts. git merge --abort will abort the merge process and try to reconstruct the
       pre-merge state. However, if there were uncommitted changes when the merge started (and
       especially if those changes were further modified after the merge was started), git merge
       --abort will in some cases be unable to reconstruct the original (pre-merge) changes.
       Therefore:

       Warning: Running git merge with uncommitted changes is discouraged: while possible, it
       leaves you in a state that is hard to back out of in the case of a conflict.

OPTIONS
       --commit, --no-commit
	   Perform the merge and commit the result. This option can be used to override
	   --no-commit.

	   With --no-commit perform the merge but pretend the merge failed and do not autocommit,
	   to give the user a chance to inspect and further tweak the merge result before
	   committing.

       --edit, --no-edit
	   Invoke an editor before committing successful mechanical merge to further edit the
	   auto-generated merge message, so that the user can explain and justify the merge. The
	   --no-edit option can be used to accept the auto-generated message (this is generally
	   discouraged). The --edit option is still useful if you are giving a draft message with
	   the -m option from the command line and want to edit it in the editor.

	   Older scripts may depend on the historical behaviour of not allowing the user to edit
	   the merge log message. They will see an editor opened when they run git merge. To make
	   it easier to adjust such scripts to the updated behaviour, the environment variable
	   GIT_MERGE_AUTOEDIT can be set to no at the beginning of them.

       --ff
	   When the merge resolves as a fast-forward, only update the branch pointer, without
	   creating a merge commit. This is the default behavior.

       --no-ff
	   Create a merge commit even when the merge resolves as a fast-forward. This is the
	   default behaviour when merging an annotated (and possibly signed) tag.

       --ff-only
	   Refuse to merge and exit with a non-zero status unless the current HEAD is already
	   up-to-date or the merge can be resolved as a fast-forward.

       --log[=<n>], --no-log
	   In addition to branch names, populate the log message with one-line descriptions from
	   at most <n> actual commits that are being merged. See also git-fmt-merge-msg(1).

	   With --no-log do not list one-line descriptions from the actual commits being merged.

       --stat, -n, --no-stat
	   Show a diffstat at the end of the merge. The diffstat is also controlled by the
	   configuration option merge.stat.

	   With -n or --no-stat do not show a diffstat at the end of the merge.

       --squash, --no-squash
	   Produce the working tree and index state as if a real merge happened (except for the
	   merge information), but do not actually make a commit or move the HEAD, nor record
	   $GIT_DIR/MERGE_HEAD to cause the next git commit command to create a merge commit.
	   This allows you to create a single commit on top of the current branch whose effect is
	   the same as merging another branch (or more in case of an octopus).

	   With --no-squash perform the merge and commit the result. This option can be used to
	   override --squash.

       -s <strategy>, --strategy=<strategy>
	   Use the given merge strategy; can be supplied more than once to specify them in the
	   order they should be tried. If there is no -s option, a built-in list of strategies is
	   used instead (git merge-recursive when merging a single head, git merge-octopus
	   otherwise).

       -X <option>, --strategy-option=<option>
	   Pass merge strategy specific option through to the merge strategy.

       --verify-signatures, --no-verify-signatures
	   Verify that the commits being merged have good and trusted GPG signatures and abort
	   the merge in case they do not.

       --summary, --no-summary
	   Synonyms to --stat and --no-stat; these are deprecated and will be removed in the
	   future.

       -q, --quiet
	   Operate quietly. Implies --no-progress.

       -v, --verbose
	   Be verbose.

       --progress, --no-progress
	   Turn progress on/off explicitly. If neither is specified, progress is shown if
	   standard error is connected to a terminal. Note that not all merge strategies may
	   support progress reporting.

       -m <msg>
	   Set the commit message to be used for the merge commit (in case one is created).

	   If --log is specified, a shortlog of the commits being merged will be appended to the
	   specified message.

	   The git fmt-merge-msg command can be used to give a good default for automated git
	   merge invocations.

       --[no-]rerere-autoupdate
	   Allow the rerere mechanism to update the index with the result of auto-conflict
	   resolution if possible.

       --abort
	   Abort the current conflict resolution process, and try to reconstruct the pre-merge
	   state.

	   If there were uncommitted worktree changes present when the merge started, git merge
	   --abort will in some cases be unable to reconstruct these changes. It is therefore
	   recommended to always commit or stash your changes before running git merge.

	   git merge --abort is equivalent to git reset --merge when MERGE_HEAD is present.

       <commit>...
	   Commits, usually other branch heads, to merge into our branch. Specifying more than
	   one commit will create a merge with more than two parents (affectionately called an
	   Octopus merge).

	   If no commit is given from the command line, and if merge.defaultToUpstream
	   configuration variable is set, merge the remote-tracking branches that the current
	   branch is configured to use as its upstream. See also the configuration section of
	   this manual page.

PRE-MERGE CHECKS
       Before applying outside changes, you should get your own work in good shape and committed
       locally, so it will not be clobbered if there are conflicts. See also git-stash(1). git
       pull and git merge will stop without doing anything when local uncommitted changes overlap
       with files that git pull/git merge may need to update.

       To avoid recording unrelated changes in the merge commit, git pull and git merge will also
       abort if there are any changes registered in the index relative to the HEAD commit. (One
       exception is when the changed index entries are in the state that would result from the
       merge already.)

       If all named commits are already ancestors of HEAD, git merge will exit early with the
       message "Already up-to-date."

FAST-FORWARD MERGE
       Often the current branch head is an ancestor of the named commit. This is the most common
       case especially when invoked from git pull: you are tracking an upstream repository, you
       have committed no local changes, and now you want to update to a newer upstream revision.
       In this case, a new commit is not needed to store the combined history; instead, the HEAD
       (along with the index) is updated to point at the named commit, without creating an extra
       merge commit.

       This behavior can be suppressed with the --no-ff option.

TRUE MERGE
       Except in a fast-forward merge (see above), the branches to be merged must be tied
       together by a merge commit that has both of them as its parents.

       A merged version reconciling the changes from all branches to be merged is committed, and
       your HEAD, index, and working tree are updated to it. It is possible to have modifications
       in the working tree as long as they do not overlap; the update will preserve them.

       When it is not obvious how to reconcile the changes, the following happens:

	1. The HEAD pointer stays the same.

	2. The MERGE_HEAD ref is set to point to the other branch head.

	3. Paths that merged cleanly are updated both in the index file and in your working tree.

	4. For conflicting paths, the index file records up to three versions: stage 1 stores the
	   version from the common ancestor, stage 2 from HEAD, and stage 3 from MERGE_HEAD (you
	   can inspect the stages with git ls-files -u). The working tree files contain the
	   result of the "merge" program; i.e. 3-way merge results with familiar conflict markers
	   <<<===>>>.

	5. No other changes are made. In particular, the local modifications you had before you
	   started merge will stay the same and the index entries for them stay as they were,
	   i.e. matching HEAD.

       If you tried a merge which resulted in complex conflicts and want to start over, you can
       recover with git merge --abort.

MERGING TAG
       When merging an annotated (and possibly signed) tag, Git always creates a merge commit
       even if a fast-forward merge is possible, and the commit message template is prepared with
       the tag message. Additionally, if the tag is signed, the signature check is reported as a
       comment in the message template. See also git-tag(1).

       When you want to just integrate with the work leading to the commit that happens to be
       tagged, e.g. synchronizing with an upstream release point, you may not want to make an
       unnecessary merge commit.

       In such a case, you can "unwrap" the tag yourself before feeding it to git merge, or pass
       --ff-only when you do not have any work on your own. e.g.

       --- git fetch origin git merge v1.2.3^0 git merge --ff-only v1.2.3 ---

HOW CONFLICTS ARE PRESENTED
       During a merge, the working tree files are updated to reflect the result of the merge.
       Among the changes made to the common ancestor's version, non-overlapping ones (that is,
       you changed an area of the file while the other side left that area intact, or vice versa)
       are incorporated in the final result verbatim. When both sides made changes to the same
       area, however, Git cannot randomly pick one side over the other, and asks you to resolve
       it by leaving what both sides did to that area.

       By default, Git uses the same style as the one used by the "merge" program from the RCS
       suite to present such a conflicted hunk, like this:

	   Here are lines that are either unchanged from the common
	   ancestor, or cleanly resolved because only one side changed.
	   <<<<<<< yours:sample.txt
	   Conflict resolution is hard;
	   let's go shopping.
	   =======
	   Git makes conflict resolution easy.
	   >>>>>>> theirs:sample.txt
	   And here is another line that is cleanly resolved or unmodified.

       The area where a pair of conflicting changes happened is marked with markers <<<<<<<,
       =======, and >>>>>>>. The part before the ======= is typically your side, and the part
       afterwards is typically their side.

       The default format does not show what the original said in the conflicting area. You
       cannot tell how many lines are deleted and replaced with Barbie's remark on your side. The
       only thing you can tell is that your side wants to say it is hard and you'd prefer to go
       shopping, while the other side wants to claim it is easy.

       An alternative style can be used by setting the "merge.conflictstyle" configuration
       variable to "diff3". In "diff3" style, the above conflict may look like this:

	   Here are lines that are either unchanged from the common
	   ancestor, or cleanly resolved because only one side changed.
	   <<<<<<< yours:sample.txt
	   Conflict resolution is hard;
	   let's go shopping.
	   |||||||
	   Conflict resolution is hard.
	   =======
	   Git makes conflict resolution easy.
	   >>>>>>> theirs:sample.txt
	   And here is another line that is cleanly resolved or unmodified.

       In addition to the <<<<<<<, =======, and >>>>>>> markers, it uses another ||||||| marker
       that is followed by the original text. You can tell that the original just stated a fact,
       and your side simply gave in to that statement and gave up, while the other side tried to
       have a more positive attitude. You can sometimes come up with a better resolution by
       viewing the original.

HOW TO RESOLVE CONFLICTS
       After seeing a conflict, you can do two things:

       o   Decide not to merge. The only clean-ups you need are to reset the index file to the
	   HEAD commit to reverse 2. and to clean up working tree changes made by 2. and 3.; git
	   merge --abort can be used for this.

       o   Resolve the conflicts. Git will mark the conflicts in the working tree. Edit the files
	   into shape and git add them to the index. Use git commit to seal the deal.

       You can work through the conflict with a number of tools:

       o   Use a mergetool.  git mergetool to launch a graphical mergetool which will work you
	   through the merge.

       o   Look at the diffs.  git diff will show a three-way diff, highlighting changes from
	   both the HEAD and MERGE_HEAD versions.

       o   Look at the diffs from each branch.	git log --merge -p <path> will show diffs first
	   for the HEAD version and then the MERGE_HEAD version.

       o   Look at the originals.  git show :1:filename shows the common ancestor, git show
	   :2:filename shows the HEAD version, and git show :3:filename shows the MERGE_HEAD
	   version.

EXAMPLES
       o   Merge branches fixes and enhancements on top of the current branch, making an octopus
	   merge:

	       $ git merge fixes enhancements

       o   Merge branch obsolete into the current branch, using ours merge strategy:

	       $ git merge -s ours obsolete

       o   Merge branch maint into the current branch, but do not make a new commit
	   automatically:

	       $ git merge --no-commit maint

	   This can be used when you want to include further changes to the merge, or want to
	   write your own merge commit message.

	   You should refrain from abusing this option to sneak substantial changes into a merge
	   commit. Small fixups like bumping release/version name would be acceptable.

MERGE STRATEGIES
       The merge mechanism (git-merge and git-pull commands) allows the backend merge strategies
       to be chosen with -s option. Some strategies can also take their own options, which can be
       passed by giving -X<option> arguments to git-merge and/or git-pull.

       resolve
	   This can only resolve two heads (i.e. the current branch and another branch you pulled
	   from) using a 3-way merge algorithm. It tries to carefully detect criss-cross merge
	   ambiguities and is considered generally safe and fast.

       recursive
	   This can only resolve two heads using a 3-way merge algorithm. When there is more than
	   one common ancestor that can be used for 3-way merge, it creates a merged tree of the
	   common ancestors and uses that as the reference tree for the 3-way merge. This has
	   been reported to result in fewer merge conflicts without causing mis-merges by tests
	   done on actual merge commits taken from Linux 2.6 kernel development history.
	   Additionally this can detect and handle merges involving renames. This is the default
	   merge strategy when pulling or merging one branch.

	   The recursive strategy can take the following options:

	   ours
	       This option forces conflicting hunks to be auto-resolved cleanly by favoring our
	       version. Changes from the other tree that do not conflict with our side are
	       reflected to the merge result. For a binary file, the entire contents are taken
	       from our side.

	       This should not be confused with the ours merge strategy, which does not even look
	       at what the other tree contains at all. It discards everything the other tree did,
	       declaring our history contains all that happened in it.

	   theirs
	       This is the opposite of ours.

	   patience
	       With this option, merge-recursive spends a little extra time to avoid mismerges
	       that sometimes occur due to unimportant matching lines (e.g., braces from distinct
	       functions). Use this when the branches to be merged have diverged wildly. See also
	       git-diff(1)--patience.

	   diff-algorithm=[patience|minimal|histogram|myers]
	       Tells merge-recursive to use a different diff algorithm, which can help avoid
	       mismerges that occur due to unimportant matching lines (such as braces from
	       distinct functions). See also git-diff(1)--diff-algorithm.

	   ignore-space-change, ignore-all-space, ignore-space-at-eol
	       Treats lines with the indicated type of whitespace change as unchanged for the
	       sake of a three-way merge. Whitespace changes mixed with other changes to a line
	       are not ignored. See also git-diff(1)-b, -w, and --ignore-space-at-eol.

	       o   If their version only introduces whitespace changes to a line, our version is
		   used;

	       o   If our version introduces whitespace changes but their version includes a
		   substantial change, their version is used;

	       o   Otherwise, the merge proceeds in the usual way.

	   renormalize
	       This runs a virtual check-out and check-in of all three stages of a file when
	       resolving a three-way merge. This option is meant to be used when merging branches
	       with different clean filters or end-of-line normalization rules. See "Merging
	       branches with differing checkin/checkout attributes" in gitattributes(5) for
	       details.

	   no-renormalize
	       Disables the renormalize option. This overrides the merge.renormalize
	       configuration variable.

	   rename-threshold=<n>
	       Controls the similarity threshold used for rename detection. See also git-
	       diff(1)-M.

	   subtree[=<path>]
	       This option is a more advanced form of subtree strategy, where the strategy makes
	       a guess on how two trees must be shifted to match with each other when merging.
	       Instead, the specified path is prefixed (or stripped from the beginning) to make
	       the shape of two trees to match.

       octopus
	   This resolves cases with more than two heads, but refuses to do a complex merge that
	   needs manual resolution. It is primarily meant to be used for bundling topic branch
	   heads together. This is the default merge strategy when pulling or merging more than
	   one branch.

       ours
	   This resolves any number of heads, but the resulting tree of the merge is always that
	   of the current branch head, effectively ignoring all changes from all other branches.
	   It is meant to be used to supersede old development history of side branches. Note
	   that this is different from the -Xours option to the recursive merge strategy.

       subtree
	   This is a modified recursive strategy. When merging trees A and B, if B corresponds to
	   a subtree of A, B is first adjusted to match the tree structure of A, instead of
	   reading the trees at the same level. This adjustment is also done to the common
	   ancestor tree.

CONFIGURATION
       merge.conflictstyle
	   Specify the style in which conflicted hunks are written out to working tree files upon
	   merge. The default is "merge", which shows a <<<<<<< conflict marker, changes made by
	   one side, a ======= marker, changes made by the other side, and then a >>>>>>> marker.
	   An alternate style, "diff3", adds a ||||||| marker and the original text before the
	   ======= marker.

       merge.defaultToUpstream
	   If merge is called without any commit argument, merge the upstream branches configured
	   for the current branch by using their last observed values stored in their
	   remote-tracking branches. The values of the branch.<current branch>.merge that name
	   the branches at the remote named by branch.<current branch>.remote are consulted, and
	   then they are mapped via remote.<remote>.fetch to their corresponding remote-tracking
	   branches, and the tips of these tracking branches are merged.

       merge.ff
	   By default, Git does not create an extra merge commit when merging a commit that is a
	   descendant of the current commit. Instead, the tip of the current branch is
	   fast-forwarded. When set to false, this variable tells Git to create an extra merge
	   commit in such a case (equivalent to giving the --no-ff option from the command line).
	   When set to only, only such fast-forward merges are allowed (equivalent to giving the
	   --ff-only option from the command line).

       merge.log
	   In addition to branch names, populate the log message with at most the specified
	   number of one-line descriptions from the actual commits that are being merged.
	   Defaults to false, and true is a synonym for 20.

       merge.renameLimit
	   The number of files to consider when performing rename detection during a merge; if
	   not specified, defaults to the value of diff.renameLimit.

       merge.renormalize
	   Tell Git that canonical representation of files in the repository has changed over
	   time (e.g. earlier commits record text files with CRLF line endings, but recent ones
	   use LF line endings). In such a repository, Git can convert the data recorded in
	   commits to a canonical form before performing a merge to reduce unnecessary conflicts.
	   For more information, see section "Merging branches with differing checkin/checkout
	   attributes" in gitattributes(5).

       merge.stat
	   Whether to print the diffstat between ORIG_HEAD and the merge result at the end of the
	   merge. True by default.

       merge.tool
	   Controls which merge tool is used by git-mergetool(1). The list below shows the valid
	   built-in values. Any other value is treated as a custom merge tool and requires that a
	   corresponding mergetool.<tool>.cmd variable is defined.

	   o   araxis

	   o   bc3

	   o   codecompare

	   o   deltawalker

	   o   diffuse

	   o   ecmerge

	   o   emerge

	   o   gvimdiff

	   o   gvimdiff2

	   o   kdiff3

	   o   meld

	   o   opendiff

	   o   p4merge

	   o   tkdiff

	   o   tortoisemerge

	   o   vimdiff

	   o   vimdiff2

	   o   xxdiff

       merge.verbosity
	   Controls the amount of output shown by the recursive merge strategy. Level 0 outputs
	   nothing except a final error message if conflicts were detected. Level 1 outputs only
	   conflicts, 2 outputs conflicts and file changes. Level 5 and above outputs debugging
	   information. The default is level 2. Can be overridden by the GIT_MERGE_VERBOSITY
	   environment variable.

       merge.<driver>.name
	   Defines a human-readable name for a custom low-level merge driver. See
	   gitattributes(5) for details.

       merge.<driver>.driver
	   Defines the command that implements a custom low-level merge driver. See
	   gitattributes(5) for details.

       merge.<driver>.recursive
	   Names a low-level merge driver to be used when performing an internal merge between
	   common ancestors. See gitattributes(5) for details.

       branch.<name>.mergeoptions
	   Sets default options for merging into branch <name>. The syntax and supported options
	   are the same as those of git merge, but option values containing whitespace characters
	   are currently not supported.

SEE ALSO
       git-fmt-merge-msg(1), git-pull(1), gitattributes(5), git-reset(1), git-diff(1), git-ls-
       files(1), git-add(1), git-rm(1), git-mergetool(1)

GIT
       Part of the git(1) suite

Git 1.8.3.1				    06/10/2014				     GIT-MERGE(1)


All times are GMT -4. The time now is 07:01 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.