ACPI(1) General Commands Manual ACPI(1)NAME
acpi - Shows battery status and other ACPI information
SYNOPSIS
acpi [options]
DESCRIPTION
acpi Shows information from the /proc or the /sys filesystem, such as battery status or thermal information.
OPTIONS -b | --battery
show battery information
-a | --ac-adapter
show ac adapter information
-t | --thermal
show thermal information
-c | --cooling
show cooling device information
-V | --everything
show every device, overrides above options
-s | --show-empty
show non-operational devices
-i | --details
show additional details if available:
* battery capacity information
* temperature trip points
-f | --fahrenheit
use fahrenheit as the temperature unit instead of default celsius
-k | --kelvin
use kelvin as the temperature unit instead of default celsius
-p | --proc
use the old /proc interface, default is the new /sys one
-d | --directory <dir>
path to ACPI info (either /proc/acpi or /sys/class)
-h | --help
display help and exit
-v | --version
output version information and exit
AUTHOR
The original version of this manual page was written by Paul Telford <pxt@debian.org> for the Debian system. Newer additions were done by
Michael Meskes <meskes@debian.org>. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU GPL.
ACPI(1)
Check Out this Related Man Page
ACPI(1) General Commands Manual ACPI(1)NAME
acpi - Shows battery status and other ACPI information
SYNOPSIS
acpi [options]
DESCRIPTION
acpi Shows information from the /proc or the /sys filesystem, such as battery status or thermal information.
OPTIONS -b | --battery
show battery information
-a | --ac-adapter
show ac adapter information
-t | --thermal
show thermal information
-c | --cooling
show cooling device information
-V | --everything
show every device, overrides above options
-s | --show-empty
show non-operational devices
-i | --details
show additional details if available:
* battery capacity information
* temperature trip points
-f | --fahrenheit
use fahrenheit as the temperature unit instead of default celsius
-k | --kelvin
use kelvin as the temperature unit instead of default celsius
-p | --proc
use the old /proc interface, default is the new /sys one
-d | --directory <dir>
path to ACPI info (either /proc/acpi or /sys/class)
-h | --help
display help and exit
-v | --version
output version information and exit
AUTHOR
The original version of this manual page was written by Paul Telford <pxt@debian.org> for the Debian system. Newer additions were done by
Michael Meskes <meskes@debian.org>. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU GPL.
ACPI(1)
I have a DS25 and when i run "show device" don't appear my 'dka.....' and 'dkb....' devices, but i know they must be there, where could be the error? what can i do to see them?
I'm using Tru64
PD: Im so sorry if i repeat this Q but i really need an answer and i dunno where to ask... (6 Replies)
I have a DS25 and when i run "show device" don't appear my 'dka.....' and 'dkb....' devices, but i know they must be there, where could be the error? what can i do to see them? (3 Replies)
I have a Korn shell that successfully queries the system temperature of my server. I am able to use the envmon env_current_temp to display just the last 2 characters of output. The full output is:
envmon:
env_current_temp = 36
I tried writing the value (36) out to txt, then reading the txt... (3 Replies)
Hi,
I have a NETRA 240 server wich should work on high temperature environment (up to 50 deg celsius). After reaching ~48 deg, the system is shuting down.
The HighShutDownThreshold of the CPU is set to 89 deg
The PowerOffThreshold of the CPU is set to 96 deg
Please help me to change these... (2 Replies)
I'm brand new to awk and need your help.
I want to be able to shut down my workstations when they become to hot (because we've lost our cooling). I found a really neat way to monitor the temperature of the system and a short, simple awk scipt to use with it:
/usr/sbin/prtpicl -v -c... (2 Replies)
Currently we have this DS4300 issue, we found that we have to replace the two batteries. Each from each controller.
1) When poweroff the DS4300, when taking out the battery, will this affect or clear out the saved configuration of the local settings ?
2) If no, is there any documentation thats... (2 Replies)
Hi all,
My Sun StorageTek 2540 have redundant batteries, but a battery was failed.
# /opt/SUNWstkcam/bin/sscs list -d MyStorage1 fru
Name FRU Alarm State Status Revision Unique Id
-------------------------- ----------- --------... (2 Replies)
I have been trying to access bios info regarding temperatures under my Slackware 13.37 OS.
I first looked at /proc/acpi/processor/CPU0/throttling where I found my active state to be T0 and my state count is 16. My understanding is that T0 is 100% throttling of either the CPU fan or the processor... (5 Replies)
I got a replacement Heatsink and Fan unit, but the OEM unit has the SUN Thermal Interface Material (TIM) already on the heatsink matting surface. Because mine is used it does not have the TIM. Also there are 2 different TIM material SUN used based on the Processor (1-1.28GHz uses a glue backed... (1 Reply)
Hi everyone,
I am running Debian Wheezy 7.2 with a 3.2.0-4-686-pae kernel. There are a couple of virtual files and directories in /proc I can't seem to find much information about. I am aware that some of them might be legacy, though. Anyway, here they are:
acpi: according to this link, this... (2 Replies)
My TOD battery of IBM 285 is dead
Fast question: i have to buy an original battery(there is only one on ebay!)
Or i can use a normal lithium battery for pc bios?
Thanks (2 Replies)
I have two DELL OPTIPLEX 330 x64 PCs with dual core (2.2ghz x2), 2gigs ram. First one is dual boot with Ubuntu on top of Windows XP pro 86. Second one is stand alone Ubuntu.
The CRT monitors on both PCs periodically fade as if they are going into standby mode. But they don't go completely... (12 Replies)