Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

mkillum(1) [bsd man page]

MKILLUM(1)						      General Commands Manual							MKILLUM(1)

mkillum - compute illum sources for a RADIANCE scene SYNOPSIS
mkillum [ -n nprocs ][ rtrace options ] octree [ < file .. ] mkillum [ rtrace options ] -defaults DESCRIPTION
Mkillum takes a prepared RADIANCE scene description and an octree and computes light source distributions for each surface, replacing them with secondary sources whose contributions can be computed more efficiently by rpict(1) and rvu(1). This type of optimization is most use- ful for windows and skylights which represent concentrated sources of indirect illumination. Mkillum is not appropriate for very large sources or sources with highly directional distributions. These are best handled respectively by the ambient calculation and the secondary source types in RADIANCE. If the -n option is specified with a value greater than 1, multiple ray tracing processes will be used to accelerate computation on a shared memory machine. Note that there is no benefit to using more processes than there are local CPUs available to do the work. Remaining arguments to mkillum are interpreted as rendering options for rtrace(1), to compute the light distributions for the input sur- faces. These surfaces can be any combination of polygons, spheres and rings. Other surfaces may be included, but mkillum cannot compute their distributions. By default, mkillum reads from its standard input and writes to its standard output. It is possible to specify multiple input files in a somewhat unconventional fashion by placing a lesser-than symbol ('<') before the file names. (Note that this character must be escaped from most shells.) This is necessary so mkillum can tell where the rendering arguments end and its own input files begin. VARIABLES
Mkillum has a number of parameters that can be changed by comments in the input file of the form: #@mkillum variable=value option switch{+|-} .. String or integer variables are separated from their values by the equals sign ('='). Options appear by themselves. Switches are followed either by a plus sign to turn them on or a minus sign to turn them off. Parameters are usually changed many times within the same input file to tailor the calculation, specify different labels and so on. The parameters and their meanings are described below. o=string Set the output file to string. All subsequent scene data will be sent to this file. If this appears in the first comment in the input, nothing will be sent to the standard output. Note that this is not recommended when running mkillum from rad(1), which expects the output to be on the standard output. m=string Set the material identifier to string. This name will be used not only as the new surface modifier, but it will also be used to name the distribution pattern and the data files. The distribution name will be string plus the suffix ".dist". The data file will be named string plus possibly an integer plus a ".dat" suffix. The integer is used to avoid accidently writing over an existing file. If overwriting the file is desired, use the f variable below. f=string Set the data file name to string. The next data file will be given this name plus a ".dat" suffix. Subsequent files will be named string plus an integer plus the ".dat" suffix. An existing file with the same name will be clobbered. This variable may be unset by leaving off the value. (See also the m variable above.) a Produce secondary sources for all of the surfaces in the input. This is the default. e=string Produce secondary sources for all surfaces except those modified by string. Surfaces modified by string will be passed to the output unchanged. i=string Only produce secondary sources for surfaces modified by string. n Do not produce any secondary sources. All input will be passed to the output unaffected, except any void surfaces will be removed. b=real Do not produce a secondary source for a surface if its average brightness (radiance) is less than the value real. c={d|a|n} Use color information according to the given character. If the character is d, then color information will be used in three sep- arate data files and the distribution will be fully characterized in terms of color. If the character is a, then only the aver- age color is computed and the distribution will not contain color information. If the character is n, even the average distribu- tion color will be thrown away, producing secondary sources that are completely uncolored. This may be desirable from a color- balancing point of view. d=integer Set the number of direction samples per projected steradian to integer. The number of directions stored in the associated data file will be approximately this number multiplied by pi for polygons and rings, and by 4pi for spheres. If integer is zero, then a diffuse source is assumed and no distribution is created. d=string Set the surface Bidirectional Scattering Distribution Function (BSDF) to the given file. The RADIANCE library path will be searched if the file does not begin with a '.' or '~' character. This file must contain an LBNL Window 6 XML specification of a valid BSDF for the given surface, and all rays will be interpreted through this function, which may be produced by the Radiance genBSDF(1) program. The orientation of the BSDF may be controlled with the u setting, described below. If this variable has no setting or an integer is specified, mkillum returns to the default behavior of computing the output distribution directly. s=integer Set the number of ray samples per direction to integer. This variable affects the accuracy of the distribution value for each direction as well as the computation time for mkillum. l{+|-} Switch between light sources and illum sources. If this switch is enabled (l+), mkillum will use the material type "light" to represent surfaces. If disabled (l-), mkillum will use the material type "illum" with the input surface modifier as its alter- nate material. The default is l-. u=[+|-]{X|Y|Z} The given axis will be considered "up" for the purposes of interpreting BSDF data specified with the d variable. The BSDF will be reoriented relative to the surface as necessary to keep the up vector in the vertical plane that contains this axis and the surface normal, corresponding to an azimuth of 90 degrees. The default up vector is +Z. t=real Set the surface thickness to real in world coordinates. This value is used for determining where to start rays that need to begin on the opposite side of a fenestration system, specifically to compute the incoming distribution for a BSDF computation. If the thickness is set to 0 and a BSDF contains detailed geometry, it will be translated and output as part of the new descrip- tion, provided the l- option is also in effect. (This currently works only for rectangular polygons.) The default thickness is 0. EXAMPLES
The following command generates illum's corresponding to geometry in the files "it1.rad" and "it2.rad": mkillum -ab 2 -ad 1024 -av .1 .1 .1 basic.oct "<" it1.rad it2.rad > illums.rad The output file "illums.rad" would then be combined with the original scene geometry to create a more easily rendered composite. ENVIRONMENT
RAYPATH the directories to check for auxiliary files. AUTHOR
Work on this program was initiated and sponsored by the LESO group at EPFL in Switzerland. SEE ALSO
genBSDF(1), oconv(1), rad(1), rpict(1), rtrace(1), rvu(1) RADIANCE
10/6/95 MKILLUM(1)
Man Page