Connect from USB to serial port of switch

9 More Discussions You Might Find Interesting

1. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!!

2. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports...

3. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. AIX

How to connect PC's USB port to pSeries system?

Hello AIX Group Members, I have two systems: (1) IBM pSeries 640, 7026-B80. (2) A 5-month old HP laptop with Windows Vista. It has no serial port and only has USB ports on it. My question are: How can I use the laptop as the p640's terminal? How can I make the connection? What type of cable...

6. Solaris

USB to Serial Adapter connection

Hi Community, I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly. I've this problem, I'm connecting to Server with Putty client with this settings: boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed...

7. UNIX for Dummies Questions & Answers

USB serial help needed

Hi iam new bie to unix. we are getting the sensor positional values on hyperterminal(UART).but our task is to use this data for mouse movement.so wat we hav to do ?? is this required to change usb driver cud u send info regarding my query?? Thanks in advance :) :) :)

8. SCO

Usb To Serial (sco6)

According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser* Problem is that when I go to mkdev serial, it is not there. Anyone...

9. Linux

modem - usb to serial configuration

I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0 I am using the device /dev/ttyUSB0 When I issue the command "mgetty ttyUSB0" I get the following output in the log file. How do I get the system to see the modem. 12/02 14:17:55...

LEARN ABOUT DEBIAN

fence_vixel

fence_vixel(8)						      System Manager's Manual						    fence_vixel(8)

NAME

       fence_vixel - I/O Fencing agent for Vixel FC switches

SYNOPSIS

       fence_vixel [OPTION]...

DESCRIPTION

       fence_vixel is an I/O Fencing agent which can be used with Vixel FC switches.  It logs into a Vixel switch via telnet and removes the spec-
       ified port from the zone.  Removing the zone access from the port disables the port from being able to access the storage.

       fence_vixel accepts options on the command line as well as from stdin.  fenced sends parameters through stdin  when  it	execs  the  agent.
       fence_vixel can be run by itself with command line options which is useful for testing.

       After  a fence operation has taken place the fenced machine can no longer connect to the Vixel FC switch.  When the fenced machine is ready
       to be brought back into the GFS cluster (after reboot) the port on the Vixel FC switch needs to be enabled. In order to do this,  log  into
       the Vixel FC switch. Then go to:

       config->zones->config <port> <comma-separated-list-of-ports-in-the-zone>

       Then apply

       Consult the Vixel manual for details

       Vendor URL: http://www.emulex.com

OPTIONS

       -a IPaddress
	      IP address of the switch.

       -h     Print out a help message describing available options, then exit.

       -n port
	      The port number to remove zoning from on the switch.

       -p password
	      Password for login.

       -S path
	      Full path to an executable to generate the password for login.

       -V     Print out a version message, then exit.

STDIN PARAMETERS

       agent = < param >
	      This option is used by fence_node(8) and is ignored by fence_vixel.

       ipaddr = < hostname | ip >
	      IP address or hostname of the switch.

       passwd = < param >
	      Password for login.

       passwd_script = < param >
	      Full path to an executable to generate the password for login.

       port = < param >
	      The port number to remove zoning from on the switch.

SEE ALSO

       fence(8), fence_node(8)

																    fence_vixel(8)

Linux