Visit Our UNIX and Linux User Community


Dell Dual Xeon PowerEdge 4600


 
Thread Tools Search this Thread
UNIX Standards and Benchmarks UNIX & LINUX Benchmarks (Version 3.11) Linux Benchmarks Dell Dual Xeon PowerEdge 4600
# 1  
Old 10-04-2003
Dell Dual Xeon PowerEdge 4600

Notes:



System Configuration: [i686] Dell Computer Corporation PowerEdge 4600 (4 X Intel(R) XEON(TM) CPU 2.00GHz
1988.782 MHz) hyperthreaded
System clock frequency: 99.0827 MHz
Memory size (approximate): 2559 Megabytes

========================= CPUs ========================

CPU # CPU MHz CACHE (KB) Bogomips
------- --------- ------------ ----------
0 1988.782 512 KB 3944.04
3970.35
1 1988.782 512 KB
2 1988.782 512 KB
3 1988.782 512 KB 3970.35
3970.35


PCI RAID Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di (rev 01)
PCI SCSI Adaptec RAID
RAID5 across 5 disks.

Results:
BYTE UNIX Benchmarks (Version 3.11)
System -- Linux box .
unknown
Start Benchmark Run: Wed Sep 10 16:13:25 EDT 2003
13 interactive users.
Dhrystone 2 without register variables 2804051.1 lps (10 secs, 6 samples)
Dhrystone 2 using register variables 2779392.5 lps (10 secs, 6 samples)
Arithmetic Test (type = arithoh) 10609125.6 lps (10 secs, 6 samples)
Arithmetic Test (type = register) 495673.6 lps (10 secs, 6 samples)
Arithmetic Test (type = short) 329765.3 lps (10 secs, 6 samples)
Arithmetic Test (type = int) 493445.2 lps (10 secs, 6 samples)
Arithmetic Test (type = long) 495279.2 lps (10 secs, 6 samples)
Arithmetic Test (type = float) 447996.4 lps (10 secs, 6 samples)
Arithmetic Test (type = double) 448015.6 lps (10 secs, 6 samples)
System Call Overhead Test 198333.6 lps (10 secs, 6 samples)
Pipe Throughput Test 282941.1 lps (10 secs, 6 samples)
Pipe-based Context Switching Test 104133.0 lps (10 secs, 6 samples)
Process Creation Test 3907.1 lps (10 secs, 6 samples)
Execl Throughput Test 1299.8 lps (9 secs, 6 samples)
File Read (10 seconds) 856057.0 KBps (10 secs, 6 samples)
File Write (10 seconds) 184249.0 KBps (10 secs, 6 samples)
File Copy (10 seconds) 37179.0 KBps (10 secs, 6 samples)
File Read (30 seconds) 925.0 KBps (30 secs, 2 samples)
File Write (30 seconds) 427.0 KBps (30 secs, 2 samples)
File Copy (30 seconds) 1.0 KBps (30 secs, 2 samples)
C Compiler Test 839.7 lpm (60 secs, 3 samples)
Shell scripts (1 concurrent) 1809.0 lpm (60 secs, 3 samples)
Shell scripts (2 concurrent) 1354.3 lpm (60 secs, 3 samples)
Shell scripts (4 concurrent) 930.0 lpm (60 secs, 3 samples)
Shell scripts (8 concurrent) 497.0 lpm (60 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places 55201.8 lpm (60 secs, 6 samples)
Recursion Test--Tower of Hanoi 48568.8 lps (10 secs, 6 samples)



INDEX VALUES
TEST BASELINE RESULT INDEX

Arithmetic Test (type = double) 2541.7 448015.6 176.3
Dhrystone 2 without register variables 22366.3 2804051.1 125.4
Execl Throughput Test 16.5 1299.8 78.8
File Copy (30 seconds) 179.0 1.0 0.0
Pipe-based Context Switching Test 1318.5 104133.0 79.0
Shell scripts (8 concurrent) 4.0 497.0 124.2
=========
SUM of 6 items 583.6
AVERAGE 97.3

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. SCO

Dell PowerEdge 2600 tape backup

I was asked to get a Dell PowerEdge 2600 server, out of warranty, running SCO 3.2v5.06 to perform a full backup. I spent hours researching and preparing a strategy only to fail on-site. The only device names in /dev for a tape drive were /dev/xStp0 /dev/xcdt0 /dev/xct0 ... (6 Replies)
Discussion started by: ezlarry
6 Replies

2. Linux Benchmarks

HP ML 350 dual Xeon 3.2GHz

CPU: dual Xeon 3.2 GHz Ram: 1Gig Motherboard: Bus: 800MHz Cache: 1MB Controller:Smart Array 641 Disk: UltraSCSI 320 Load: Kernel:2.6.9-1.667smp Kernel ELF?: yes pgms: compiled with gcc 3.4.3 BYTE UNIX Benchmarks (Version 3.11) System -- Linux ford 2.6.9-1.667smp #1 SMP... (0 Replies)
Discussion started by: migurus
0 Replies

3. Programming

/dev/mem on Dell Poweredge

Hi, I have a C++ program to access /dev/mem and retrieve details like Vendor, Manufacturer details of the motherboard. This works fine on all the machines except for on Dell Poweredge 2850,1950... machines. I receive a 'EFAULT' when I try to access /dev/mem on these servers. I suspect some... (1 Reply)
Discussion started by: ragisreekanth
1 Replies

4. SCO

Continueing relyability problems with SCO 6.0 on Dell Poweredge 1800 with PERC DC4.

Hello all, I'am experiencing weird relyability problems with a SCO 6.0 Openserver server that runs on a Dell Poweredge 1800 equipped with a PERC DC4 raid controller and 4 36 GB 15 K rpm hot swappable scsi harddisks. It runs a RAID 10 configuration. It uses the mega hba, Revision 8.03a Release... (1 Reply)
Discussion started by: frederik1
1 Replies

5. UNIX for Dummies Questions & Answers

Stange problem Dell PowerEdge 1950/ Boradcom Netextreme NIC

I have 2 Dell Poweredge 1950 servers running . I have been having intermittent performance issues with the NIC cards on one of them. The two servers are identical and are running the same operating system. The server that has the issue is on the DMZ on a a static IP and is hosting a website. ... (0 Replies)
Discussion started by: skotapal
0 Replies

6. Filesystems, Disks and Memory

Linux and Dell 1500sc Poweredge Server

Does anybody no how to get around the fact that the Red Hat installation does not see the SCSI hard drives. It lets you manually pick the proper device, but still fails saying no drive detected (or something to that effect). I was going to install windows 2003 Server and use VMware...but again,... (1 Reply)
Discussion started by: Fatflea
1 Replies

7. Solaris

Installing Solaris 10 on Dell PowerEdge 2800

hi, i am trying to install solaris 10 (on 4 cd's downloaded from the sun website) on my dell poweredge 2800 server. 2 xeon processors, 2GB of RAM and 2 NICS, 73 GB SCSI (maxtor ultra320, 3.5 series), i can give more details on request... the installation crashes when trying to detect the NICS... (0 Replies)
Discussion started by: xinugeek
0 Replies

8. Linux Benchmarks

Dell Poweredge 2400 / 533

CPU/Speed: Dual PIII 533 Ram: 256Mb PC133 Motherboard: Unknown, Intel Chipset Cache: 256k on board Controller: PARC Raid 2/Si, AIC-7880U Disk: 30Gb RAID 5 Load: 1 user. Clean boot, init 5 but X-Windows not loaded. Kernel: See Benchmarks. pgms: gcc 3.2.3 ... (2 Replies)
Discussion started by: Garp
2 Replies

Featured Tech Videos