Login or Register to Ask a Question and Join Our Community


IP Networking

Connecting to an SSN from an internal network

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums IP Networking Connecting to an SSN from an internal network
# 1  
Old 10-31-2008
Connecting to an SSN from an internal network
Hi

I have an Apache Web server running on a Solaris 8 box that sits on a SSN.

I have one desktop that connects to the SSN from the internal network and is recognised directly without using the gateway, all other desktops, laptops from inside the internal network connect to the SSN using the gateway. I want to allow more than the one desktop direct access to the webserver.

I have added additional desktops to the webservers /etc/hosts file but this does not seem to have any impact.

The reason why I am trying to do this is:
I have an application that restricts access to the website for members only (its not porn). When there is a lockout via the application for all users from our internal network (the users are locked out by a shared external IP address) only the desktop (using its internal IP address) which has direct access to the webserver can then acccess the administration panel of the application. I want more than one user to be able to access the administration panel in the event of a lockout.

Any suggestions as to how to remedy this problem?

Thanks in advance.
Last edited by Bobby76; 10-31-2008 at 08:29 AM..
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Red Hat

Connecting using SSH in WAN network

i have been learning linux from some time for linux plus exam and learned SSH protocol and have practised to connect to remote computer within Lan network and able to sucesssfully connect it . using ssh username@hostname But i wish to ask how do i use same ssh protocol to connect to other ... (6 Replies)
Discussion started by: lobsang
6 Replies

2. UNIX for Advanced & Expert Users

Ways to quickly check if you are connected to the internet while on an internal network

I need some help thinking of ways to quickly check if I am connected to the internet while on an internal network. I never lose connection to the internal network but for some annoying reason I lose the internet quite often. I don't get any errors or warnings. I usually find out that I have lost my... (2 Replies)
Discussion started by: cokedude
2 Replies

3. UNIX Desktop Questions & Answers

While Connecting to Google networking. Error = Unusual traffic from your computer network.

Hello, I am working in office, where, more than 60 clients machines (only 16 machines are on windows) are there and one server Centos Server, I have configured clients with server, so that internet will be used form only one IP. Only 1 ip is assigned, but now a days, my client machines are... (2 Replies)
Discussion started by: RedRocks!!
2 Replies

4. Shell Programming and Scripting

connecting to network, auto-entering info

Hey guys, I just started college a few days ago. To my dismay, my school has a very frustrating wireless network access system. Every time you want to use the network, you need to open up a browser and get re-directed to a login page. Every access, you need to reenter the same username and... (1 Reply)
Discussion started by: Chain Breaker
1 Replies

5. IP Networking

Connecting to DHCP network with Realtek interface

I have a Realtek 8139 interface in one of my machines and it will not connect to the network. /etc/rc.conf contains ifconfig_rl0="DHCP" and "rl0" was obtained from a dmesg. A network interface restart yields the following: # /etc/rc.d/netif restart Stopping network: lo0 rl0 fwe0 plip0. rl0: no... (3 Replies)
Discussion started by: figaro
3 Replies

6. HP-UX

Connecting To An External Network Using A logical (PACKAGE) IP Address

Hie everyone, I am currently facing a problem whereby I can not connect to an external network from a package ip address on a HP-UX cluster. Below is the illustration: Primary Server IP Address : n.n.n.202 Secondary Server IP Address : n.n.n.212 Package IP Address : n.n.n.211 ... (1 Reply)
Discussion started by: cchilenga
1 Replies

7. IP Networking

can i force connecting to local web server via internet network ?

Hello all this is general question , if i have web server installed in my local pc and i have client that connecting to that web server can i force it always to go via the internet network ? the reason im asking is .. that im noticed when i close my internet connection i still can connect to my... (2 Replies)
Discussion started by: umen
2 Replies

8. Solaris

Connecting Solaris to Airport network

Hi, I've been trying to find out for the past two days how to set my Solaris 10 to join wireless network (Airport base station with ACL and wep or wpa on). Using ethernet is a bit out of question as I don't have an ethernet cable that would reach the other side of the house. Solaris 10... (1 Reply)
Discussion started by: giax
1 Replies

9. Solaris

Problems connecting Solaris 10 to network via ISP

I have just installed Solaris 10 (x86) on my PC, which is connected to an ISP via a Netgear DG834G firewall/modem router. I can't find the network. My router has the IP address 192.168.0.1 and my ISP assigned IP address is 214.159.X.Y I have edited various files based upon information I have... (7 Replies)
Discussion started by: christian_hicks
7 Replies

10. Shell Programming and Scripting

internal network chat

anyone help me get a perl script or c++ that will let me talk to a nt4 box from my win98 server without having to be online ? (8 Replies)
Discussion started by: perleo
8 Replies
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

guessnet-scan

GUESSNET-SCAN(8)					      System Manager's Manual						  GUESSNET-SCAN(8)

NAME

       guessnet-scan - guess network configuration data by looking at network traffic

SYNOPSIS

       guessnet-scan [options] [ethernet_interface]

DESCRIPTION

       Guessnet-scan tries to deduce network configuration data by watching network traffic at a given Ethernet interface.

       After  scanning	network  traffic  for some time, guessnet-scan prints a configuration string suitable for inclusion in /etc/network/inter-
       faces.

       Note that guessnet-scan uses heuristics and wild guesses and that the resulting data is not guaranteed to  be  accurate.   The  program	is
       intended to be used as a first try at getting network configuration data without bothering anyone.

OPTIONS

       Options follow the usual GNU conventions,

       --debug
	      Print debugging messages.

       --help Show a brief summary of commandline options.

       --init-time=int
	      Time in seconds to wait for the interface to initialize when it is not found already up at program startup.  Default: 3 seconds.

       -t, --timeout=int
	      Time in seconds to watch for network traffic.  Default: 5 seconds.

       -v, --verbose
	      Operate verbosely.

       --version
	      Show the version number of the program.

SCANNING REQUIREMENTS

       To  correctly  identify all data of the local network, guessnet-scan needs to see traffic related to a host in the local network and to the
       local gateway, if any.

       To be able to identify the network gateway, guessnet-scan also needs to see some traffic directed to the external network: you can help the
       detection  by  generating  some	outbound IP traffic during the scan, for example by browsing a web page (without proxy) or using telnet to
       open a connection to some remote host.

       Note that if you are connected to a switch, guessnet-scan won't probably be able to work, since the switch will isolate it from the network
       traffic that the other machines are generating.

SEE ALSO

       guessnet(8), interfaces(5).

AUTHOR

       Guessnet-scan was written by Enrico Zini <enrico@debian.org>.

								  10 October 2004						  GUESSNET-SCAN(8)