Setup Dial In VPN on Cisco Router


 
Thread Tools Search this Thread
Special Forums IP Networking Setup Dial In VPN on Cisco Router
# 1  
Old 10-17-2008
Setup Dial In VPN on Cisco Router

Hello,

Does anyone know where I can find configuration information on setting up
a dial in VPN on Cicso IOS for a bunch of servers.

Could not seem to find anything in search engines.

Thanks
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. IP Networking

Cisco VPN server and client - connection drop

I have a Cisco 1841 router configured as Easy VPN Server. Here is the configuration of the router: Cisco# Cisco#show running-config Building configuration... Current configura - Pastebin.com I have a Centos 5.7 server with installed Cisco VPN client for Linux. The client successfully... (0 Replies)
Discussion started by: rcbandit
0 Replies

2. IP Networking

Cisco VPN pcf and OpenVPN

I was given my pcf file to login to work from home and wanted to use OpenVPN instead of the Cisco VPN client software. Can I use this pcf file with OpenVPN? I attempted to use vpnc: http://wiki.centos.org/HowTos/vpnc but it just times out ?? (2 Replies)
Discussion started by: metallica1973
2 Replies

3. UNIX for Dummies Questions & Answers

Problem when I try to Install a Client VPN Cisco

Hi Gurus of UNIX, I have a problem when I try to install a software VPN Cisco in Laptop (HP530). I do the following procedures: Part 2 - VPN Client Compilation We will now set up the vpn client. As there is no official Cisco VPN Client for OpenSolaris X86 available, we will use vpnc.... (1 Reply)
Discussion started by: andresguillen
1 Replies

4. Ubuntu

Ubuntu 10.04 - Unable to connect to Cisco VPN

Hi all, I am trying to configure and connect Cisco VPN on Ubuntu 10.04. I've imported .pcf file. The new vpn conn appears in the VPN Connections option. Now when I select it, it doesn't connect. Nothing happens. I am not able to connect to VPN at all. I tried using kvpnc as well but it... (10 Replies)
Discussion started by: morningSunshine
10 Replies

5. Red Hat

cisco anyconnect VPN client installation??

Anyone had installed Cisco AnyConnect VPN client on RedHat5.3 EL or CentOS 5.3? I tried on CentOS 5.3 but always getting host unreachable error. Same for windows xp works fine. The error log reports: Sep 1 19:14:03 localhost vpnagent: Function: tableCallbackHandler File: RouteMgr.cpp Line:... (3 Replies)
Discussion started by: zing_foru
3 Replies

6. Solaris

Cisco IOS VPN server IKE

How do I tell if Cisco IOS VPN server IKE is running on my solaris 10 system (1 Reply)
Discussion started by: pgsanders
1 Replies

7. Shell Programming and Scripting

continue after connecting to cisco vpn

Hi all, This will save me a tremendous amount of time if i can get this script working. I have alot of sites i need to connect to using cisco vpn and then ssh onto servers to retrieve some info. Its all repetitative and it needs scripted. what i have done so far is put this into a script. ... (0 Replies)
Discussion started by: borderblaster
0 Replies

8. IP Networking

Cisco vpn client

Who in the 64 ubuntu adopted cisco vpn client on the wireless network I downloaded the cisco vpn client for linux but run vpn_install make file when an error in cisco with the help of the document read in half a day, nor do I know this vpn client in the 64 systems in use. Who can help me, a... (1 Reply)
Discussion started by: Eason
1 Replies

9. IP Networking

Linux behind a cisco router

Dear All, I have worked with xDSL routers working in bridged mode, and linux behind them working as a Firewall utilizing IPTABLES. My question is, how this will change if the xDSL router is replaced with a Cisco Router? I mean to ask that, can I assign a public ip on the linux machine, which... (0 Replies)
Discussion started by: tmm
0 Replies
Login or Register to Ask a Question
Smokeping_probes_CiscoRTTMonDNS(3)				     SmokePing					Smokeping_probes_CiscoRTTMonDNS(3)

NAME
Smokeping::probes::CiscoRTTMonDNS.pm - Probe for SmokePing SYNOPSIS
*** Probes *** +CiscoRTTMonDNS forks = 5 offset = 50% step = 300 timeout = 15 # The following variables can be overridden in each target section ioshost = RTTcommunity@Myrouter.foobar.com.au # mandatory iosint = 10.33.22.11 name = www.foobar.com.au # mandatory pings = 5 timeout = 15 # [...] *** Targets *** probe = CiscoRTTMonDNS # if this should be the default probe # [...] + mytarget # probe = CiscoRTTMonDNS # if the default probe is something else host = my.host ioshost = RTTcommunity@Myrouter.foobar.com.au # mandatory iosint = 10.33.22.11 name = www.foobar.com.au # mandatory pings = 5 timeout = 15 DESCRIPTION
A probe for smokeping, which uses the ciscoRttMon MIB functionality ("Service Assurance Agent", "SAA") of Cisco IOS to time ( recursive, type A) DNS queries to a DNS server. VARIABLES
Supported probe-specific variables: forks Run this many concurrent processes at maximum Example value: 5 Default value: 5 offset If you run many probes concurrently you may want to prevent them from hitting your network all at the same time. Using the probe- specific offset parameter you can change the point in time when each probe will be run. Offset is specified in % of total interval, or alternatively as 'random', and the offset from the 'General' section is used if nothing is specified here. Note that this does NOT influence the rrds itself, it is just a matter of when data acqusition is initiated. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.) Example value: 50% step Duration of the base interval that this probe should use, if different from the one specified in the 'Database' section. Note that the step in the RRD files is fixed when they are originally generated, and if you change the step parameter afterwards, you'll have to delete the old RRD files or somehow convert them. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.) Example value: 300 timeout How long a single 'ping' takes at maximum Example value: 15 Default value: 5 Supported target-specific variables: ioshost The (mandatory) ioshost parameter specifies the Cisco router, which will send the DNS requests, as well as the SNMP community string on the router. Example value: RTTcommunity@Myrouter.foobar.com.au This setting is mandatory. iosint The (optional) iosint parameter is the source address for the DNS packets. This should be one of the active (!) IP addresses of the router to get results. IOS looks up the target host address in the forwarding table and then uses the interface(s) listed there to send the DNS packets. By default IOS uses the (primary) IP address on the sending interface as source address for packets originated by the router. Example value: 10.33.22.11 name The (mandatory) name parameter is the DNS name to resolve. Example value: www.foobar.com.au This setting is mandatory. pings How many pings should be sent to each target, if different from the global value specified in the Database section. Note that the number of pings in the RRD files is fixed when they are originally generated, and if you change this parameter afterwards, you'll have to delete the old RRD files or somehow convert them. Example value: 5 timeout How long a single RTTMonDNS 'ping' take at maximum plus 10 seconds to spare. Since we control our own timeout the only purpose of this is to not have us killed by the ping method from basefork. Example value: 15 Default value: 15 AUTHORS
Joerg.Kummer at Roche.com NOTES
host parameter The host parameter specifies the DNS server, which the router will use. IOS VERSIONS This probe only works with IOS 12.0(3)T or higher. It is recommended to test it on less critical routers first. INSTALLATION To install this probe copy ciscoRttMonMIB.pm to ($SMOKEPINGINSTALLDIR)/lib/Smokeping and CiscoRTTMonDNS.pm to ($SMOKEPINGINSTALLDIR)/lib/Smokeping/probes. The router(s) must be configured to allow read/write SNMP access. Sufficient is: snmp-server community RTTCommunity RW If you want to be a bit more restrictive with SNMP write access to the router, then consider configuring something like this access-list 2 permit 10.37.3.5 snmp-server view RttMon ciscoRttMonMIB included snmp-server community RTTCommunity view RttMon RW 2 The above configuration grants SNMP read-write only to 10.37.3.5 (the smokeping host) and only to the ciscoRttMon MIB tree. The probe does not need access to SNMP variables outside the RttMon tree. BUGS
The probe does unnecessary DNS queries, i.e. more than configured in the "pings" variable, because the RTTMon MIB only allows to set a total time for all queries in one measurement run (one "life"). Currently the probe sets the life duration to "pings"*5+3 seconds (5 secs is the timeout value hardcoded into this probe). SEE ALSO
<http://oss.oetiker.ch/smokeping/> <http://www.switch.ch/misc/leinen/snmp/perl/> The best source for background info on SAA is Cisco's documentation on <http://www.cisco.com> and the CISCO-RTTMON-MIB documentation, which is available at: ftp://ftp.cisco.com/pub/mibs/v2/CISCO-RTTMON-MIB.my <ftp://ftp.cisco.com/pub/mibs/v2/CISCO-RTTMON-MIB.my> 2.6.8 2013-03-17 Smokeping_probes_CiscoRTTMonDNS(3)