network madness


 
Thread Tools Search this Thread
Special Forums IP Networking network madness
# 8  
Old 09-02-2002
You should be able to connect via a serial port on a pc using the console cable supplied by Cisco, to the console port on the switch:
http://www.cisco.com/univercd/cc/td/...v9x/1900qs.htm
# 9  
Old 09-04-2002
the ports are fine ... thanks for the link ... is it becoz of the distance .. there may be packet dropping ? its abt 125 meters ...
# 10  
Old 09-06-2002
Just to confirm that ping works from the remote workstations to the host ?
With regard to network stability check on the workstations using netstat, i.e. on unix '#netstat -i' or on NT ':\netstat -e' and look for errors or collisions... Also try a constatnt ping from the workstations to the host and check the reply times....they should be pretty consistent.
I am still convinced the issue lies in the config of the suspect switch....can you physically switch the switch units around and test all workstations....and/or can you factory reset the suspect unit and reconf...
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and... (4 Replies)
Discussion started by: moshesa
4 Replies

2. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a... (7 Replies)
Discussion started by: samer.odeh
7 Replies

3. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that. (0 Replies)
Discussion started by: berny88
0 Replies

4. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks (9 Replies)
Discussion started by: skamal4u
9 Replies

5. What is on Your Mind?

Interview madness

A discussion elsewhere got me thinking: What where the most insane/amusing/strange interview questions or answers you got/gave? Not overly technical stuff, but questions that made you go "Huh?" (And keeping with this forums main Idea: "No technical Q&A") I'll start... (6 Replies)
Discussion started by: pludi
6 Replies

6. Shell Programming and Scripting

2 versions, 1 script (A tale of madness.)

So, I have a machine running solaris (x86) and it has two different versions of Math::BigInt installed on it. The older version is 1.77. The newer version is 1.87 (via activeperl). When I run my code, one of the modules I use needs at least version 1.78. Somehow, it defaults to looking at the... (5 Replies)
Discussion started by: mrwatkin
5 Replies

7. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no... (1 Reply)
Discussion started by: old noob
1 Replies

8. Programming

Help in developing a Network Appliation to monitor pc in a network

I am developing a Network Appliation to monitor computers in a network. Specs are App monitors the current web page viewed in each system App also can shutdown the computer in the network App can show all process run by each computer in the network I am now confused how to start my... (2 Replies)
Discussion started by: valaparambil88
2 Replies
Login or Register to Ask a Question