SNMP in a Bridge device

8 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

2. UNIX for Dummies Questions & Answers

Need to transfer all kernel logs (var/log/messages) to the snmp listener as snmp trap

i am working with embedded system -Dell DCS management sub system. my question is as below: currently we are using linux kernel 2.6.30 build and we have a kernel logs stored to the /var/log/messages path. now we have to transfer all this logs to the specified SNMP target as a part of SNMP...

3. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

4. Infrastructure Monitoring

SNMP traps to SNMP server

Dear Champs, I am new to unix, and need to configure linux server to send below traps to a SNMP server. Monitoring TRAP Disk Space Low Monitoring TRAP Memory Low Monitoring TRAP CPU high Monitoring TRAP Admin login/Logoff Please help me how to send this information to my SNMP server...

5. IP Networking

SNMP Problem - SNMP not getting to the agent.

I am having a problem with an SNMP event, and I am not sure where I should be looking to solve this problem. Description: There is an SNMP event in our system that for one reason or another is not getting sent out as an email because it is never getting to our SNMP agent. I see where the...

6. Red Hat

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

Hi , Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide.

7. IP Networking

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

8. UNIX for Dummies Questions & Answers

bridge on linux

Hello. I expirince some problems with bridging, i'm pretty new to that technology I've 2 nic's 1 - wireless rt2500 ra0 canyon cn511 card 2 - e100 intel, ifconfig ra0 up && iwconfig ra0 essid xxx channel x mode managed bring me wireless connection up then i do following: brctl addbr br0...

LEARN ABOUT LINUX

upstart-socket-bridge

upstart-socket-bridge(8)				      System Manager's Manual					  upstart-socket-bridge(8)

NAME

       upstart-socket-bridge - Bridge between Upstart and sockets

SYNOPSIS

       upstart-socket-bridge [OPTIONS]...

DESCRIPTION

       The upstart-socket-bridge queries the Upstart init(8) daemon for all job configurations which start on or stop on the socket event. It then
       waits for an incoming connection on each specified socket(7) and when detected emits the socket event (socket-event (7)), setting a  number
       of environment variables for the job to query.

AUTHOR

       Written by Scott James Remnant <scott@netsplit.com>

       Manual page written by James Hunt <james.hunt@ubuntu.com>

BUGS

       Report bugs at <https://launchpad.net/upstart/+bugs>

COPYRIGHT

       Copyright (C) 2011 Canonical Ltd.

       This is free software; see the source for copying conditions.  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
       LAR PURPOSE.

SEE ALSO

       init(5) init(8) socket(2) socket(7) socket-event(7)

upstart 							    2011-03-08						  upstart-socket-bridge(8)

IP Networking