Loop in /24 Subnet, No ping beyond .1 and .2


Login or Register for Dates, Times and to Reply

 
Thread Tools Search this Thread
# 1  
Loop in /24 Subnet, No ping beyond .1 and .2

Running 3650 switch. I have this odd issue where I cannot get 4 new Centos 7 boxes pinging out on public IPs (nor pinging in), only gateway .1 and first public IP .2

This is what I see, which doesn't look normal. How do I fix this?

The server itself is configured fine (Centos 7)

Code:
[root@localhost ~]# cat /etc/sysconfig/network-s*/ifcfg-em1
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="em1"
UUID="******"
DEVICE="em1"
ONBOOT="yes"
IPADDR="xxx.xxx.30.2"
PREFIX="24"
GATEWAY="xxx.xxx.30.1"
DNS1="8.8.8.8"
DNS2="8.8.4.4"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
IPV6_PRIVACY="no"

Code:
[root@localhost ~]# cat /etc/resolv.conf
# Generated by NetworkManager
nameserver 8.8.8.8
nameserver 8.8.4.4

Switch:

Code:
Cisco3650#show ip route xxx.xxx.30.0
Routing entry for xxx.xxx.30.0/24, 2 known subnets
  Attached (2 connections)
  Variably subnetted with 2 masks
C        xxx.xxx.30.0/24 is directly connected, Vlan26
L        xxx.xxx.30.1/32 is directly connected, Vlan26

I don't know why that /32 is there. This is odd. I only assigned a /24, not that /32 and I cannot find the /32 anywhere.

Show run looks normal.

Code:
Cisco3650#show run int vlan 26
Building configuration...

Current configuration : 85 bytes
!
interface Vlan26
 description Server 26
 ip address xxx.xxx.30.1 255.255.255.0
end

This is happening to all four new VLANs I created last week, all 4 are running Centos 7 servers. That's odd. None of their assigned IPs ping past the first public IP. The rest show this same error.

Code:
[root@localhost ~]# ping xxx.xxx.107.59
PING xxx.xxx.107.59 (xxx.xxx.107.59) 56(84) bytes of data.
From xxx.xxx.107.58 icmp_seq=1 Destination Host Unreachable
From xxx.xxx.107.58 icmp_seq=2 Destination Host Unreachable
From xxx.xxx.107.58 icmp_seq=3 Destination Host Unreachable
From xxx.xxx.107.58 icmp_seq=4 Destination Host Unreachable

I tried another Centos 7 server on the same switch, same issue where I can only ping internally the gateway .1 and first public .2, or in this subnet (/29) case, I can ping gateway .129 and main IP .130 but not 132 - 134.

Code:
Cisco3650#show ip route xxx.xxx.107.130
Routing entry for xxx.xxx.107.128/29
  Known via "connected", distance 0, metric 0 (connected, via interface)
  Routing Descriptor Blocks:
  * directly connected, via Vlan24
      Route metric is 0, traffic share count is 1

Is this an issue with Centos 7? I tried Google DNS and also the data center's DNS. Same thing (I did 'service network restart' first before re-testing ping).
Login or Register for Dates, Times and to Reply

Previous Thread | Next Thread
Thread Tools Search this Thread
Search this Thread:
Advanced Search

Test Your Knowledge in Computers #595
Difficulty: Medium
In C, the starting point in the executable program is the prime() function.
True or False?

10 More Discussions You Might Find Interesting

1. Programming

Ping test sends mail when ping fails

help with bash script! im am working on this script to make sure my server will stay online, so i made this script.. HOSTS="192.168.138.155" COUNT=4 pingtest(){ for myhost in "$@" do ping -c "$COUNT" "$myhost" &&return 1 done return 0 } if pingtest $HOSTS #100% failed... (4 Replies)
Discussion started by: mort3924
4 Replies

2. Solaris

Guest LDOMS on same subnet cant ping eachother

Hi all, New to this forum. I have just been reading through a historical thread about some issues with IPMP. Some tips from "Peasant" where very useful. Please see below "Just couple of more hints regarding VM. For VDS, use one VDS - one guest LDOM, don't put everything in primary-vds.... (9 Replies)
Discussion started by: selectstar
9 Replies

3. Linux

Ping check failed from Nagios master server on windows hosts in the same subnet

Hello All, We have added a windows host and its config files to Nagios master server and wanted to do a ping check alone at the moment however, the nagios master server identifies the host in its GUI and immediately disappears can anyone let me know the right approach to this one, We want to... (2 Replies)
Discussion started by: lovesaikrishna
2 Replies

4. Shell Programming and Scripting

Bash script for ping in your own subnet

I have a question for one who wants to help me. I want to create a bash script to ping IP-adresses. It must first ask me the beginnen IP, then the ending IP like: 192.168.100.1 - 192.168.100.255. When nothing is filled in, then it must find my subnet and ping that, like when my ip is... (14 Replies)
Discussion started by: ugurgazi
14 Replies

5. Programming

Perl Ping Loop

Hi All i have an issue with ping, we are using dhcp and so if the machine has been offline and i ping it, i get " ping: unknown host <hostname> is there a way i can stick a loop somewhere so it would keep trying when it got the unknown host error and then when the machine came back online... (2 Replies)
Discussion started by: ab52
2 Replies

6. Shell Programming and Scripting

Ping inside FOR loop

Hello, I'm trying to write (my own primitive) traceroute command that would write out all IPs that packets are hoping through. :) So I've put the ping command inside a for loop #!/bin/bash domain=${1-www.google.com}; #If no argument, then do www.google.com. for ((i=1; i<=30; i++)) #... (9 Replies)
Discussion started by: courteous
9 Replies

7. IP Networking

Migrating existing Subnet to a new subnet and changing ip addresses in UNIX

Hi, My project needs to migrate the existing Subnet (255.255.255.0) to a new subnet and change the ipaddresses (currently C class). How can I do that. I need some information. John (0 Replies)
Discussion started by: johnmarsh
0 Replies

8. Shell Programming and Scripting

help: infinant loop script - host ping test

need to check on some hosts and send an email if there status changes I wanna put together a script in bash that will allow me to check the up/down state of a single host via ping i want it to run in a continuous loop so I can just fire the script and forget about it(dont want cron to drive... (2 Replies)
Discussion started by: zeekblack
2 Replies

9. IP Networking

ping loop

i need to write a script that can loop through ej.192.162.0.0 to 192.162.0.256 find the ones that are connected and the ones not connected write the name , ip address and connection status of each one in a file to later use it in perl to create a web page with the information thanks guys (1 Reply)
Discussion started by: djbilly
1 Replies

10. UNIX for Dummies Questions & Answers

Unix TCP/IP ping to other subnet

I have Digital UNIX V4.0B (Rev. 564) on alpha machine. I'm trying to acces network in subnet (192.168.1.x). Ip on Alpha comp. is from 192.168.3.X subnet. My default gateway on this network is 192.168.3.1 and it working OK from other machines. This machine is visible from same subnet... (2 Replies)
Discussion started by: ermingut
2 Replies

Featured Tech Videos