Squid connection to Fibre switch

10 More Discussions You Might Find Interesting

1. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1...

2. AIX

VIOS - fibre adapters not seeing luns

Hi guys, I've been trying to tackle this issue for days and I'm stumped. Hopefully someone can give more light on what else I can do. I have a p7 series box, with dual VIOS and 10 lpars and everything was working fine until I had to move the box to another location in the data centre. Ensured...

3. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance.

4. IP Networking

Squid vs iptables = no Squid access.log?

Hello, I have a pretty useless satellite link at home (far from any civilization), so I wanted to set up caching in order to speed things up. My Squid 2.6 runs "3128 transparent" and is set up quite well on a separate machine. I also have my dd-wrt router to move all port 80 traffic through...

5. Solaris

Solaris 10 ftp connection problem (connection refused, connection timed out)

Hi everyone, I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the...

6. Solaris

SAN connection - configuring fibre attached hard drive

Hi All, I recently got a connection to the SAN through a fibre channel on my solaris box: #luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED #ls -l /dev/cfg lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc I then...

7. AIX

Install Fibre Card AIX 5.3

Hello, I have two systems that are being prepared to be SAN attached .. can anyone tell me any specific checks I should perform prior to the cards being installed... I am aware of firmware / OS level and relevant drivers, is there anything else? thanks Chris.

8. Shell Programming and Scripting

4 x fibre cards elimination

Hi, I have variables like mentioned below and want to separate as mentioned in output. var1="4 x fibre cards" var2="2 fibre cards" var3="6 - fibre cards" var4="4 x dual-port" I have variables like this.I want to separate numbers from this and fibre cards from this. output has to be...

9. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad:

10. UNIX for Advanced & Expert Users

Fibre connection Point to Point SUN

Anyone know of a guide or instructions for Solaris I got to configure a SBUS HBA to talk to a tape robot. I have done this on a switch but not point to point. just going HBA >>>>> TAPE Fibre simple two nodes Kie

LEARN ABOUT CENTOS

cachemgr.cgi

cachemgr.cgi(8) 					      System Manager's Manual						   cachemgr.cgi(8)

NAME

       cachemgr.cgi - Squid HTTP proxy manager CGI web interface

SYNOPSIS

       http://your.server/cgi-bin/cachemgr.cgi

DESCRIPTION

       The cache manager ( cachemgr.cgi ) is a CGI utility for displaying statistics about the Squid HTTP proxy process as it runs. The cache man-
       ager is a convenient way to manage the cache and view statistics without logging into the server.

CONFIGURATION

       Configuration examples for many common web servers can be found in the Squid FAQ wiki.  http://wiki.squid-cache.org/SquidFaq

       ./cachemgr.conf
       /etc/squid/cachemgr.conf
	      The access configuration file defining which Squid servers may be managed via this  cachemgr.cgi	program.  Each	line  specifies  a
	      server:port followed by an optional description

	      The  server  name  may  contain  shell wildcard characters such as *, [] etc.  A quick selection dropdown menu is automatically con-
	      structed from the simple server names.

	      Specifying :port is optional. If not specified then the default proxy port is assumed. :* or :any matches any  port  on  the  target
	      server.

SECURITY

       cachemgr.cgi calls the requested server on the requested port using HTTP and returns a formatted version of the response. To avoid abuse it
       is recommended to configure your web server to restrict access to the cachemgr.cgi program.

AUTHOR

       Derived from Harvest. Further developed by numerous individuals from the internet community. Development is led by  Duane  Wessels  of  the
       National Laboratory for Applied Network Research and funded by the National Science Foundation.

COPYRIGHT

       Distributed under the GNU General Public License (GNU GPL) version 2 or later (GPLv2+).

QUESTIONS

       Questions on the usage of this program can be sent to the Squid Users mailing list <squid-users@squid-cache.org>

REPORTING BUGS

       See http://wiki.squid-cache.org/SquidFaq/BugReporting for details of what you need to include with your bug report.

       Report bugs or bug fixes using http://bugs.squid-cache.org/

       Report serious security bugs to Squid Bugs <squid-bugs@squid-cache.org>

       Report ideas for new improvements to the Squid Developers mailing list <squid-dev@squid-cache.org>

SEE ALSO

       squid(8), squidclient(1)

																   cachemgr.cgi(8)

IP Networking