Squid connection to Fibre switch

10 More Discussions You Might Find Interesting

1. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1...

2. AIX

VIOS - fibre adapters not seeing luns

Hi guys, I've been trying to tackle this issue for days and I'm stumped. Hopefully someone can give more light on what else I can do. I have a p7 series box, with dual VIOS and 10 lpars and everything was working fine until I had to move the box to another location in the data centre. Ensured...

3. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance.

4. IP Networking

Squid vs iptables = no Squid access.log?

Hello, I have a pretty useless satellite link at home (far from any civilization), so I wanted to set up caching in order to speed things up. My Squid 2.6 runs "3128 transparent" and is set up quite well on a separate machine. I also have my dd-wrt router to move all port 80 traffic through...

5. Solaris

Solaris 10 ftp connection problem (connection refused, connection timed out)

Hi everyone, I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the...

6. Solaris

SAN connection - configuring fibre attached hard drive

Hi All, I recently got a connection to the SAN through a fibre channel on my solaris box: #luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED #ls -l /dev/cfg lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc I then...

7. AIX

Install Fibre Card AIX 5.3

Hello, I have two systems that are being prepared to be SAN attached .. can anyone tell me any specific checks I should perform prior to the cards being installed... I am aware of firmware / OS level and relevant drivers, is there anything else? thanks Chris.

8. Shell Programming and Scripting

4 x fibre cards elimination

Hi, I have variables like mentioned below and want to separate as mentioned in output. var1="4 x fibre cards" var2="2 fibre cards" var3="6 - fibre cards" var4="4 x dual-port" I have variables like this.I want to separate numbers from this and fibre cards from this. output has to be...

9. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad:

10. UNIX for Advanced & Expert Users

Fibre connection Point to Point SUN

Anyone know of a guide or instructions for Solaris I got to configure a SBUS HBA to talk to a tape robot. I have done this on a switch but not point to point. just going HBA >>>>> TAPE Fibre simple two nodes Kie

LEARN ABOUT DEBIAN

squid3_ncsa_auth

ncsa_auth(8)						      System Manager's Manual						      ncsa_auth(8)

NAME

       ncsa_auth - NCSA httpd-style password file authentication helper for Squid

SYNOPSIS

       ncsa_auth passwdfile

DESCRIPTION

       ncsa_auth  allows  Squid  to  read  and authenticate user and password information from an NCSA/Apache httpd-style password file when using
       basic HTTP authentication.

       The only parameter is the password file.  It must have permissions to be read by the user that Squid is running as (cache_effective_user in
       squid.conf).

       This password file can be manipulated using htpasswd.

	* MD5 - with optional salt and magic strings  * DES - for passwords 8 characters or less in length

OPTIONS

       Only specify the password file name.

EXAMPLE

       ncsa_auth /etc/squid/squid.pass

SECURITY

       ncsa_auth must have access to the password file to be executed.

KNOWN ISSUES

       DES  functionality (used by htpasswd by default) silently truncates passwords to 8 characters.  Allowing login with password values shorter
       than the one desired.  This authenticator will reject login with long passwords when using DES.

SEE ALSO

       htpasswd(1), squid(8)

AUTHOR

       Manpage written by Rodrigo Rubira Branco <rrbranco@br.ibm.com>

Squid NCSA Auth helper						   May 16, 2006 						      ncsa_auth(8)

IP Networking